On 12/30/2012 11:26 PM, Peter Meerwald wrote:
> Signed-off-by: Peter Meerwald <pmeerw@xxxxxxxxxx>
Applied to togreg branch of iio.git
Thanks,
> ---
> drivers/iio/adc/max1363.c | 15 +++++++--------
> 1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
> index 46d8365..0ba4fea 100644
> --- a/drivers/iio/adc/max1363.c
> +++ b/drivers/iio/adc/max1363.c
> @@ -56,7 +56,7 @@
> #define MAX1363_SETUP_POWER_UP_INT_REF 0x10
> #define MAX1363_SETUP_POWER_DOWN_INT_REF 0x00
>
> -/* think about includeing max11600 etc - more settings */
> +/* think about including max11600 etc - more settings */
> #define MAX1363_SETUP_EXT_CLOCK 0x08
> #define MAX1363_SETUP_INT_CLOCK 0x00
> #define MAX1363_SETUP_UNIPOLAR 0x00
> @@ -87,7 +87,7 @@
> /* max123{6-9} only */
> #define MAX1236_SCAN_MID_TO_CHANNEL 0x40
>
> -/* max1363 only - merely part of channel selects or don't care for others*/
> +/* max1363 only - merely part of channel selects or don't care for others */
> #define MAX1363_CONFIG_EN_MON_MODE_READ 0x18
>
> #define MAX1363_CHANNEL_SEL(a) ((a) << 1)
> @@ -134,7 +134,7 @@ enum max1363_modes {
> * @mode_list: array of available scan modes
> * @default_mode: the scan mode in which the chip starts up
> * @int_vref_mv: the internal reference voltage
> - * @num_channels: number of channels
> + * @num_modes: number of modes
> * @bits: accuracy of the adc in bits
> */
> struct max1363_chip_info {
> @@ -153,7 +153,7 @@ struct max1363_chip_info {
> * @client: i2c_client
> * @setupbyte: cache of current device setup byte
> * @configbyte: cache of current device config byte
> - * @chip_info: chip model specific constants, available modes etc
> + * @chip_info: chip model specific constants, available modes, etc.
> * @current_mode: the scan mode of this chip
> * @requestedmask: a valid requested set of channels
> * @reg: supply regulator
> @@ -294,7 +294,7 @@ static const struct max1363_mode max1363_mode_table[] = {
>
> static const struct max1363_mode
> *max1363_match_mode(const unsigned long *mask,
> -const struct max1363_chip_info *ci)
> + const struct max1363_chip_info *ci)
> {
> int i;
> if (mask)
> @@ -1395,7 +1395,7 @@ static int max1363_initial_setup(struct max1363_state *st)
> | MAX1363_SETUP_UNIPOLAR
> | MAX1363_SETUP_NORESET;
>
> - /* Set scan mode writes the config anyway so wait until then*/
> + /* Set scan mode writes the config anyway so wait until then */
> st->setupbyte = MAX1363_SETUP_BYTE(st->setupbyte);
> st->current_mode = &max1363_mode_table[st->chip_info->default_mode];
> st->configbyte = MAX1363_CONFIG_BYTE(st->configbyte);
> @@ -1424,7 +1424,6 @@ static int __devinit max1363_alloc_scan_masks(struct iio_dev *indio_dev)
> return 0;
> }
>
> -
> static irqreturn_t max1363_trigger_handler(int irq, void *p)
> {
> struct iio_poll_func *pf = p;
> @@ -1523,7 +1522,7 @@ static int __devinit max1363_probe(struct i2c_client *client,
> if (ret)
> goto error_disable_reg;
>
> - /* Estabilish that the iio_dev is a child of the i2c device */
> + /* Establish that the iio_dev is a child of the i2c device */
> indio_dev->dev.parent = &client->dev;
> indio_dev->name = id->name;
> indio_dev->channels = st->chip_info->channels;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
