[PATCH v2 4/6] iio: dac: ad5624r_spi: Don't set error code to voltage_uv

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



regulator_get_voltage() may return negative error code.
Add error checking to avoid setting error code to voltage_uv.

Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
---
v2: check if ret is negative value
 drivers/iio/dac/ad5624r_spi.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/dac/ad5624r_spi.c b/drivers/iio/dac/ad5624r_spi.c
index 6a7d6a4..ae7fb64 100644
--- a/drivers/iio/dac/ad5624r_spi.c
+++ b/drivers/iio/dac/ad5624r_spi.c
@@ -238,7 +238,11 @@ static int __devinit ad5624r_probe(struct spi_device *spi)
 		if (ret)
 			goto error_put_reg;
 
-		voltage_uv = regulator_get_voltage(st->reg);
+		ret = regulator_get_voltage(st->reg);
+		if (ret < 0)
+			goto error_disable_reg;
+
+		voltage_uv = ret;
 	}
 
 	spi_set_drvdata(spi, indio_dev);
-- 
1.7.9.5



--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux