On 11/15/2012 01:15 PM, Lars-Peter Clausen wrote:
> The recent cleanups have decimated the drivers code size by quite a bit. It is
> only a few hundred lines in total now. Putting everything into one file also
> allows to reduce the code size a bit more by removing a few lines of boilerplate
> code. The only functional change made by this patch is that we now always
> include buffer support, instead of making it optional. This is more consistent
> with what we do for other drivers.
>
added to togreg branch of iio.git
> Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
> ---
> drivers/staging/iio/adc/Kconfig | 3 +-
> drivers/staging/iio/adc/Makefile | 3 +-
> .../staging/iio/adc/{ad7298_core.c => ad7298.c} | 121 ++++++++++++++++++++-
> drivers/staging/iio/adc/ad7298.h | 53 ---------
> drivers/staging/iio/adc/ad7298_ring.c | 108 ------------------
> 5 files changed, 121 insertions(+), 167 deletions(-)
> rename drivers/staging/iio/adc/{ad7298_core.c => ad7298.c} (64%)
> delete mode 100644 drivers/staging/iio/adc/ad7298_ring.c
>
> diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
> index 0177f1e..5086a46 100644
> --- a/drivers/staging/iio/adc/Kconfig
> +++ b/drivers/staging/iio/adc/Kconfig
> @@ -13,7 +13,8 @@ config AD7291
> config AD7298
> tristate "Analog Devices AD7298 ADC driver"
> depends on SPI
> - select IIO_TRIGGERED_BUFFER if IIO_BUFFER
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
> help
> Say yes here to build support for Analog Devices AD7298
> 8 Channel ADC with temperature sensor.
> diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
> index 12b4bd3..e867d01 100644
> --- a/drivers/staging/iio/adc/Makefile
> +++ b/drivers/staging/iio/adc/Makefile
> @@ -12,8 +12,7 @@ ad799x-y := ad799x_core.o
> ad799x-$(CONFIG_AD799X_RING_BUFFER) += ad799x_ring.o
> obj-$(CONFIG_AD799X) += ad799x.o
>
> -ad7298-y := ad7298_core.o
> -ad7298-$(CONFIG_IIO_BUFFER) += ad7298_ring.o
> +obj-$(CONFIG_AD7887) += ad7887.o
> obj-$(CONFIG_AD7298) += ad7298.o
>
> obj-$(CONFIG_AD7291) += ad7291.o
> diff --git a/drivers/staging/iio/adc/ad7298_core.c b/drivers/staging/iio/adc/ad7298.c
> similarity index 64%
> rename from drivers/staging/iio/adc/ad7298_core.c
> rename to drivers/staging/iio/adc/ad7298.c
> index b74b76f..2742a9d 100644
> --- a/drivers/staging/iio/adc/ad7298_core.c
> +++ b/drivers/staging/iio/adc/ad7298.c
> @@ -15,13 +15,49 @@
> #include <linux/err.h>
> #include <linux/delay.h>
> #include <linux/module.h>
> +#include <linux/interrupt.h>
>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> #include <linux/iio/buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
>
> #include "ad7298.h"
>
> +#define AD7298_WRITE (1 << 15) /* write to the control register */
> +#define AD7298_REPEAT (1 << 14) /* repeated conversion enable */
> +#define AD7298_CH(x) (1 << (13 - (x))) /* channel select */
> +#define AD7298_TSENSE (1 << 5) /* temperature conversion enable */
> +#define AD7298_EXTREF (1 << 2) /* external reference enable */
> +#define AD7298_TAVG (1 << 1) /* temperature sensor averaging enable */
> +#define AD7298_PDD (1 << 0) /* partial power down enable */
> +
> +#define AD7298_MAX_CHAN 8
> +#define AD7298_BITS 12
> +#define AD7298_STORAGE_BITS 16
> +#define AD7298_INTREF_mV 2500
> +
> +#define AD7298_CH_TEMP 9
> +
> +#define RES_MASK(bits) ((1 << (bits)) - 1)
> +
> +struct ad7298_state {
> + struct spi_device *spi;
> + struct regulator *reg;
> + unsigned ext_ref;
> + struct spi_transfer ring_xfer[10];
> + struct spi_transfer scan_single_xfer[3];
> + struct spi_message ring_msg;
> + struct spi_message scan_single_msg;
> + /*
> + * DMA (thus cache coherency maintenance) requires the
> + * transfer buffers to live in their own cache lines.
> + */
> + unsigned short rx_buf[12] ____cacheline_aligned;
> + unsigned short tx_buf[2];
> +};
> +
> #define AD7298_V_CHAN(index) \
> { \
> .type = IIO_VOLTAGE, \
> @@ -66,6 +102,84 @@ static const struct iio_chan_spec ad7298_channels[] = {
> IIO_CHAN_SOFT_TIMESTAMP(8),
> };
>
> +/**
> + * ad7298_update_scan_mode() setup the spi transfer buffer for the new scan mask
> + **/
> +static int ad7298_update_scan_mode(struct iio_dev *indio_dev,
> + const unsigned long *active_scan_mask)
> +{
> + struct ad7298_state *st = iio_priv(indio_dev);
> + int i, m;
> + unsigned short command;
> + int scan_count;
> +
> + /* Now compute overall size */
> + scan_count = bitmap_weight(active_scan_mask, indio_dev->masklength);
> +
> + command = AD7298_WRITE | st->ext_ref;
> +
> + for (i = 0, m = AD7298_CH(0); i < AD7298_MAX_CHAN; i++, m >>= 1)
> + if (test_bit(i, active_scan_mask))
> + command |= m;
> +
> + st->tx_buf[0] = cpu_to_be16(command);
> +
> + /* build spi ring message */
> + st->ring_xfer[0].tx_buf = &st->tx_buf[0];
> + st->ring_xfer[0].len = 2;
> + st->ring_xfer[0].cs_change = 1;
> + st->ring_xfer[1].tx_buf = &st->tx_buf[1];
> + st->ring_xfer[1].len = 2;
> + st->ring_xfer[1].cs_change = 1;
> +
> + spi_message_init(&st->ring_msg);
> + spi_message_add_tail(&st->ring_xfer[0], &st->ring_msg);
> + spi_message_add_tail(&st->ring_xfer[1], &st->ring_msg);
> +
> + for (i = 0; i < scan_count; i++) {
> + st->ring_xfer[i + 2].rx_buf = &st->rx_buf[i];
> + st->ring_xfer[i + 2].len = 2;
> + st->ring_xfer[i + 2].cs_change = 1;
> + spi_message_add_tail(&st->ring_xfer[i + 2], &st->ring_msg);
> + }
> + /* make sure last transfer cs_change is not set */
> + st->ring_xfer[i + 1].cs_change = 0;
> +
> + return 0;
> +}
> +
> +/**
> + * ad7298_trigger_handler() bh of trigger launched polling to ring buffer
> + *
> + * Currently there is no option in this driver to disable the saving of
> + * timestamps within the ring.
> + **/
> +static irqreturn_t ad7298_trigger_handler(int irq, void *p)
> +{
> + struct iio_poll_func *pf = p;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + struct ad7298_state *st = iio_priv(indio_dev);
> + s64 time_ns = 0;
> + int b_sent;
> +
> + b_sent = spi_sync(st->spi, &st->ring_msg);
> + if (b_sent)
> + goto done;
> +
> + if (indio_dev->scan_timestamp) {
> + time_ns = iio_get_time_ns();
> + memcpy((u8 *)st->rx_buf + indio_dev->scan_bytes - sizeof(s64),
> + &time_ns, sizeof(time_ns));
> + }
> +
> + iio_push_to_buffers(indio_dev, (u8 *)st->rx_buf);
> +
> +done:
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + return IRQ_HANDLED;
> +}
> +
> static int ad7298_scan_direct(struct ad7298_state *st, unsigned ch)
> {
> int ret;
> @@ -231,7 +345,8 @@ static int __devinit ad7298_probe(struct spi_device *spi)
> spi_message_add_tail(&st->scan_single_xfer[1], &st->scan_single_msg);
> spi_message_add_tail(&st->scan_single_xfer[2], &st->scan_single_msg);
>
> - ret = ad7298_register_ring_funcs_and_init(indio_dev);
> + ret = iio_triggered_buffer_setup(indio_dev, NULL,
> + &ad7298_trigger_handler, NULL);
> if (ret)
> goto error_disable_reg;
>
> @@ -242,7 +357,7 @@ static int __devinit ad7298_probe(struct spi_device *spi)
> return 0;
>
> error_cleanup_ring:
> - ad7298_ring_cleanup(indio_dev);
> + iio_triggered_buffer_cleanup(indio_dev);
> error_disable_reg:
> if (st->ext_ref)
> regulator_disable(st->reg);
> @@ -261,7 +376,7 @@ static int __devexit ad7298_remove(struct spi_device *spi)
> struct ad7298_state *st = iio_priv(indio_dev);
>
> iio_device_unregister(indio_dev);
> - ad7298_ring_cleanup(indio_dev);
> + iio_triggered_buffer_cleanup(indio_dev);
> if (st->ext_ref) {
> regulator_disable(st->reg);
> regulator_put(st->reg);
> diff --git a/drivers/staging/iio/adc/ad7298.h b/drivers/staging/iio/adc/ad7298.h
> index 6523e01..c8ac969 100644
> --- a/drivers/staging/iio/adc/ad7298.h
> +++ b/drivers/staging/iio/adc/ad7298.h
> @@ -9,23 +9,6 @@
> #ifndef IIO_ADC_AD7298_H_
> #define IIO_ADC_AD7298_H_
>
> -#define AD7298_WRITE (1 << 15) /* write to the control register */
> -#define AD7298_REPEAT (1 << 14) /* repeated conversion enable */
> -#define AD7298_CH(x) (1 << (13 - (x))) /* channel select */
> -#define AD7298_TSENSE (1 << 5) /* temperature conversion enable */
> -#define AD7298_EXTREF (1 << 2) /* external reference enable */
> -#define AD7298_TAVG (1 << 1) /* temperature sensor averaging enable */
> -#define AD7298_PDD (1 << 0) /* partial power down enable */
> -
> -#define AD7298_MAX_CHAN 8
> -#define AD7298_BITS 12
> -#define AD7298_STORAGE_BITS 16
> -#define AD7298_INTREF_mV 2500
> -
> -#define AD7298_CH_TEMP 9
> -
> -#define RES_MASK(bits) ((1 << (bits)) - 1)
> -
> /**
> * struct ad7298_platform_data - Platform data for the ad7298 ADC driver
> * @ext_ref: Whether to use an external reference voltage.
> @@ -34,40 +17,4 @@ struct ad7298_platform_data {
> bool ext_ref;
> };
>
> -struct ad7298_state {
> - struct spi_device *spi;
> - struct regulator *reg;
> - unsigned ext_ref;
> - struct spi_transfer ring_xfer[10];
> - struct spi_transfer scan_single_xfer[3];
> - struct spi_message ring_msg;
> - struct spi_message scan_single_msg;
> - /*
> - * DMA (thus cache coherency maintenance) requires the
> - * transfer buffers to live in their own cache lines.
> - */
> - unsigned short rx_buf[12] ____cacheline_aligned;
> - unsigned short tx_buf[2];
> -};
> -
> -#ifdef CONFIG_IIO_BUFFER
> -int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev);
> -void ad7298_ring_cleanup(struct iio_dev *indio_dev);
> -int ad7298_update_scan_mode(struct iio_dev *indio_dev,
> - const unsigned long *active_scan_mask);
> -#else /* CONFIG_IIO_BUFFER */
> -
> -static inline int
> -ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev)
> -{
> - return 0;
> -}
> -
> -static inline void ad7298_ring_cleanup(struct iio_dev *indio_dev)
> -{
> -}
> -
> -#define ad7298_update_scan_mode NULL
> -
> -#endif /* CONFIG_IIO_BUFFER */
> #endif /* IIO_ADC_AD7298_H_ */
> diff --git a/drivers/staging/iio/adc/ad7298_ring.c b/drivers/staging/iio/adc/ad7298_ring.c
> deleted file mode 100644
> index e387712..0000000
> --- a/drivers/staging/iio/adc/ad7298_ring.c
> +++ /dev/null
> @@ -1,108 +0,0 @@
> -/*
> - * AD7298 SPI ADC driver
> - *
> - * Copyright 2011-2012 Analog Devices Inc.
> - *
> - * Licensed under the GPL-2.
> - */
> -
> -#include <linux/interrupt.h>
> -#include <linux/kernel.h>
> -#include <linux/slab.h>
> -#include <linux/spi/spi.h>
> -
> -#include <linux/iio/iio.h>
> -#include <linux/iio/buffer.h>
> -#include <linux/iio/trigger_consumer.h>
> -#include <linux/iio/triggered_buffer.h>
> -
> -#include "ad7298.h"
> -
> -/**
> - * ad7298_update_scan_mode() setup the spi transfer buffer for the new scan mask
> - **/
> -int ad7298_update_scan_mode(struct iio_dev *indio_dev,
> - const unsigned long *active_scan_mask)
> -{
> - struct ad7298_state *st = iio_priv(indio_dev);
> - int i, m;
> - unsigned short command;
> - int scan_count;
> -
> - /* Now compute overall size */
> - scan_count = bitmap_weight(active_scan_mask, indio_dev->masklength);
> -
> - command = AD7298_WRITE | st->ext_ref;
> -
> - for (i = 0, m = AD7298_CH(0); i < AD7298_MAX_CHAN; i++, m >>= 1)
> - if (test_bit(i, active_scan_mask))
> - command |= m;
> -
> - st->tx_buf[0] = cpu_to_be16(command);
> -
> - /* build spi ring message */
> - st->ring_xfer[0].tx_buf = &st->tx_buf[0];
> - st->ring_xfer[0].len = 2;
> - st->ring_xfer[0].cs_change = 1;
> - st->ring_xfer[1].tx_buf = &st->tx_buf[1];
> - st->ring_xfer[1].len = 2;
> - st->ring_xfer[1].cs_change = 1;
> -
> - spi_message_init(&st->ring_msg);
> - spi_message_add_tail(&st->ring_xfer[0], &st->ring_msg);
> - spi_message_add_tail(&st->ring_xfer[1], &st->ring_msg);
> -
> - for (i = 0; i < scan_count; i++) {
> - st->ring_xfer[i + 2].rx_buf = &st->rx_buf[i];
> - st->ring_xfer[i + 2].len = 2;
> - st->ring_xfer[i + 2].cs_change = 1;
> - spi_message_add_tail(&st->ring_xfer[i + 2], &st->ring_msg);
> - }
> - /* make sure last transfer cs_change is not set */
> - st->ring_xfer[i + 1].cs_change = 0;
> -
> - return 0;
> -}
> -
> -/**
> - * ad7298_trigger_handler() bh of trigger launched polling to ring buffer
> - *
> - * Currently there is no option in this driver to disable the saving of
> - * timestamps within the ring.
> - **/
> -static irqreturn_t ad7298_trigger_handler(int irq, void *p)
> -{
> - struct iio_poll_func *pf = p;
> - struct iio_dev *indio_dev = pf->indio_dev;
> - struct ad7298_state *st = iio_priv(indio_dev);
> - s64 time_ns = 0;
> - int b_sent;
> -
> - b_sent = spi_sync(st->spi, &st->ring_msg);
> - if (b_sent)
> - goto done;
> -
> - if (indio_dev->scan_timestamp) {
> - time_ns = iio_get_time_ns();
> - memcpy((u8 *)st->rx_buf + indio_dev->scan_bytes - sizeof(s64),
> - &time_ns, sizeof(time_ns));
> - }
> -
> - iio_push_to_buffers(indio_dev, (u8 *)st->rx_buf);
> -
> -done:
> - iio_trigger_notify_done(indio_dev->trig);
> -
> - return IRQ_HANDLED;
> -}
> -
> -int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev)
> -{
> - return iio_triggered_buffer_setup(indio_dev, NULL,
> - &ad7298_trigger_handler, NULL);
> -}
> -
> -void ad7298_ring_cleanup(struct iio_dev *indio_dev)
> -{
> - iio_triggered_buffer_cleanup(indio_dev);
> -}
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
