Re: [PATCH] staging:iio:lpc32xx_adc: Add scale/offset support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alban,

thanks for the patch. I can confirm that it compiles and runs fine, but
maybe someone else can comment on the IIO part.

Some nitpicking below.

On 07/11/12 17:44, Alban Bedel wrote:
> Signed-off-by: Alban Bedel <alban.bedel@xxxxxxxxxxxxxxxxx>
> ---
>  .../bindings/staging/iio/adc/lpc32xx-adc.txt       |    6 ++++
>  drivers/staging/iio/adc/lpc32xx_adc.c              |   30 +++++++++++++++++++-
>  2 files changed, 35 insertions(+), 1 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt
> index b3629d3..515c128 100644
> --- a/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt
> +++ b/Documentation/devicetree/bindings/staging/iio/adc/lpc32xx-adc.txt
> @@ -6,6 +6,11 @@ Required properties:
>    region.
>  - interrupts: The ADC interrupt
>  
> +Optional properties:
> +- reference-voltages: the 3 reference voltages value (in mV) to use
> +  for scaling. If not given or 0 a scaling factor of 1 is used.
> +- offsets: the 3 offsets to add to the raw value before scaling.
> +
>  Example:
>  
>  	adc@40048000 {
> @@ -13,4 +18,5 @@ Example:
>  		reg = <0x40048000 0x1000>;
>  		interrupt-parent = <&mic>;
>  		interrupts = <39 0>;
> +		reference-voltages = <5000>, <3300>, <1200>;
>  	};
> diff --git a/drivers/staging/iio/adc/lpc32xx_adc.c b/drivers/staging/iio/adc/lpc32xx_adc.c
> index 10c5962..aaa23ac 100644
> --- a/drivers/staging/iio/adc/lpc32xx_adc.c
> +++ b/drivers/staging/iio/adc/lpc32xx_adc.c
> @@ -64,6 +64,8 @@ struct lpc32xx_adc_info {
>  	struct completion completion;
>  
>  	u32 value;
> +	u32 ref_voltage[3];
> +	u32 offset[3];
>  };
>  
>  static int lpc32xx_read_raw(struct iio_dev *indio_dev,
> @@ -91,6 +93,26 @@ static int lpc32xx_read_raw(struct iio_dev *indio_dev,
>  		return IIO_VAL_INT;
>  	}
>  
> +	if (mask == IIO_CHAN_INFO_SCALE) {
> +		if (info->ref_voltage[chan->channel]) {
> +			unsigned factor;
> +			factor = div_u64((u64)info->ref_voltage[chan->channel] *
> +					 (u64)1000000,
> +					 ADC_VALUE_MASK);
> +			*val = factor / 1000000;
> +			*val2 = factor % 1000000;
> +			return IIO_VAL_INT_PLUS_MICRO;
> +		} else {
> +			*val = 1;
> +			return IIO_VAL_INT;
> +		}
> +	}
> +
> +	if (mask == IIO_CHAN_INFO_OFFSET) {
> +		*val = info->offset[chan->channel];
> +		return IIO_VAL_INT;
> +	}
> +
>  	return -EINVAL;
>  }
>  
> @@ -103,7 +125,9 @@ static const struct iio_info lpc32xx_adc_iio_info = {
>  	.type = IIO_VOLTAGE,				\
>  	.indexed = 1,					\
>  	.channel = _index,				\
> -	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,	\
> +	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
> +	             IIO_CHAN_INFO_SCALE_SEPARATE_BIT |	\
> +	             IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,	\

Shouldn't here be tabs instead of spaces? You can check with
scripts/checkpatch.pl

>  	.address = AD_IN * _index,			\
>  	.scan_index = _index,				\
>  }
> @@ -149,6 +173,10 @@ static int __devinit lpc32xx_adc_probe(struct platform_device *pdev)
>  	}
>  
>  	info = iio_priv(iodev);
> +	of_property_read_u32_array(pdev->dev.of_node, "reference-voltages",
> +				   info->ref_voltage, ARRAY_SIZE(info->ref_voltage));

Considering that there is one line break already, maybe there should be
another one for keeping line length.

> +	of_property_read_u32_array(pdev->dev.of_node, "offsets",
> +				   info->offset, ARRAY_SIZE(info->offset));
>  
>  	info->adc_base = ioremap(res->start, resource_size(res));
>  	if (!info->adc_base) {

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux