On 09/02/2012 05:39 PM, anish kumar wrote:
> From: anish kumar <anish198519851985@xxxxxxxxx>
>
> This patch is to use IIO to write a generic batttery driver.
> There are some inherent assumptions here:
> 1.User is having both main battery and backup battery.
> 2.Both batteries use same channel to get the information.
>
Hi thanks for stepping up to take care of this and sorry for the late reply.
> Signed-off-by: anish kumar <anish198519851985@xxxxxxxxx>
> ---
[...]
> +
> +struct generic_adc_bat {
> + struct power_supply psy;
> + struct iio_channel *channels;
> + int channel_index;
> +};
> +
> +struct generic_bat {
> + struct generic_adc_bat bat[BAT_MAX];
> + struct generic_platform_data pdata;
> + int volt_value;
> + int cur_value;
> + unsigned int timestamp;
> + int level;
> + int status;
> + int cable_plugged:1;
> +};
> +
> +static struct generic_bat generic_bat = {
> + .bat[MAIN_BAT] = {
> + .psy.name = "main-bat",
> + },
> + .bat[BACKUP_BAT] = {
> + .psy.name = "backup-bat",
> + },
> +};
This should be per device. I'd also just use one power_supply per device. If
somebody has multiple batteries in their system they can register multiple
devices. This should make the driver more flexible.
> +
> +static struct delayed_work bat_work;
This should also go into the generic_bat struct.
+
> +static void generic_adc_bat_ext_power_changed(struct power_supply *psy)
> +{
> + schedule_delayed_work(&bat_work,
> + msecs_to_jiffies(JITTER_DELAY));
> +}
> +
> +static enum power_supply_property generic_adc_main_bat_props[] = {
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> + POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
> + POWER_SUPPLY_PROP_CHARGE_NOW,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> + POWER_SUPPLY_PROP_TECHNOLOGY,
> + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> + POWER_SUPPLY_PROP_MODEL_NAME,
> +};
It probably make sense to create this at runtime, depending on which kind of
IIO channels are provided. E.g. for VOLTAGE_NOW/CURRENT_NOW.
[...]
> +
> +static int generic_adc_bat_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct generic_adc_bat *adc_bat;
> + struct generic_bat *bat;
> + int ret, scaleint, scalepart, iio_val;
> + long result = 0;
> +
> + if (!strcmp(psy->name, "main-battery")) {
> + adc_bat = container_of(psy,
> + struct generic_adc_bat, psy);
> + bat = container_of(adc_bat,
> + struct generic_bat, bat[MAIN_BAT]);
> + } else if (!strcmp(psy->name, "backup-battery")) {
> + adc_bat = container_of(psy, struct generic_adc_bat, psy);
> + bat = container_of(adc_bat,
> + struct generic_bat, bat[BACKUP_BAT]);
> + } else {
> + /* Ideally this should never happen */
> + WARN_ON(1);
> + return -EINVAL;
> + }
> +
> + if (!bat) {
> + dev_err(psy->dev, "no battery infos ?!\n");
> + return -EINVAL;
> + }
> + ret = iio_read_channel_raw(&adc_bat->channels[adc_bat->channel_index],
> + &iio_val);
> + ret = iio_read_channel_scale(&adc_bat->channels[adc_bat->channel_index],
> + &scaleint, &scalepart);
It would probably make sense to only sample if the attribute for
VOLTAGE_NOW/CURRENT_NOW property is read.
[...]
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_STATUS:
> + if (bat->pdata.gpio_charge_finished < 0)
> + val->intval = bat->level == 100000 ?
> + POWER_SUPPLY_STATUS_FULL : bat->status;
> + else
> + val->intval = bat->status;
> + return 0;
> + case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
> + val->intval = 0;
> + return 0;
> + case POWER_SUPPLY_PROP_CHARGE_NOW:
> + val->intval = bat->pdata.cal_charge(result);
> + return 0;
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + val->intval = result;
> + return 0;
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + val->intval = result;
> + return 0;
also this will return the same value for VOLTAGE_NOW and CURRENT_NOW since
there is only one channel per battery. It might make sense to allow multiple
channels per battery, one reporting current one voltage and also one for power.
> + case POWER_SUPPLY_PROP_TECHNOLOGY:
> + val->intval = bat->pdata.battery_info.technology;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> + val->intval = bat->pdata.battery_info.voltage_min_design;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> + val->intval = bat->pdata.battery_info.voltage_max_design;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> + val->intval = bat->pdata.battery_info.charge_full_design;
> + break;
> + case POWER_SUPPLY_PROP_MODEL_NAME:
> + val->strval = bat->pdata.battery_info.name;
> + break;
> + default:
> + return -EINVAL;
> + }
> + return ret;
> +}
> +
[...]
> +
> +static int __devinit generic_adc_bat_probe(struct platform_device *pdev)
> +{
> +[...]
> +
> + /* assuming main battery and backup battery is using the same channel */
> + for (i = 0; i < num_channels; i++) {
> + ret = iio_get_channel_type(&channels[i], &type);
> + if (ret < 0)
> + goto err_gpio;
> +
> + if (type == IIO_VOLTAGE || type == IIO_CURRENT) {
> + for (j = 0; j < BAT_MAX; j++) {
> + generic_bat.bat[j].channel_index = k;
> + generic_bat.bat[j].channels[k] = channels[i];
> + }
> + k++;
> + }
> + continue;
continue at the end of a loop is a noop.
> + }
> +
> + INIT_DELAYED_WORK(&bat_work, generic_adc_bat_work);
> +
> + if (pdata->gpio_charge_finished >= 0) {
gpio_is_valid
> + ret = gpio_request(pdata->gpio_charge_finished, "charged");
> + if (ret)
> + goto err_gpio;
> +
> + ret = request_irq(gpio_to_irq(pdata->gpio_charge_finished),
> + generic_adc_bat_charged,
> + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
> + "battery charged", NULL);
> + if (ret)
> + goto err_gpio;
> + }
> +
> + dev_info(&pdev->dev, "successfully loaded\n");
I'd remove that message.
> +
> + /* Schedule timer to check current status */
> + schedule_delayed_work(&bat_work,
> + msecs_to_jiffies(JITTER_DELAY));
> +
> + iio_channel_release_all(channels);
> +
> + return 0;
> +
> +err_gpio:
> + iio_channel_release_all(channels);
> +err_reg_backup:
> + for (i = 0; i < ARRAY_SIZE(generic_bat.bat); i++)
> + power_supply_unregister(&generic_bat.bat[i].psy);
> +err_reg_main:
> + return ret;
> +}
> +
[...]
> +
> +#ifdef CONFIG_PM
> +static int generic_adc_bat_suspend(struct platform_device *pdev,
> + pm_message_t state)
> +{
> + struct generic_platform_data *pdata = pdev->dev.platform_data;
> + struct generic_bat *bat = container_of(pdata,
> + struct generic_bat, pdata);
> +
> + cancel_delayed_work_sync(&bat_work);
> + bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
> +
> + return 0;
> +}
> +
> +static int generic_adc_bat_resume(struct platform_device *pdev)
> +{
> + /* Schedule timer to check current status */
> + schedule_delayed_work(&bat_work,
> + msecs_to_jiffies(JITTER_DELAY));
> +
> + return 0;
> +}
> +#else
> +#define generic_adc_bat_suspend NULL
> +#define generic_adc_bat_resume NULL
> +#endif
> +
> +static struct platform_driver generic_adc_bat_driver = {
> + .driver = {
> + .name = "generic-adc-battery",
> + },
> + .probe = generic_adc_bat_probe,
> + .remove = generic_adc_bat_remove,
> + .suspend = generic_adc_bat_suspend,
> + .resume = generic_adc_bat_resume,
Use dev_pm_ops instead. Using the suspend and resume callbacks is deprecated.
> +};
> +
> +module_platform_driver(generic_adc_bat_driver);
> +
> +MODULE_AUTHOR("anish kumar <anish198519851985@xxxxxxxxx>");
> +MODULE_DESCRIPTION("generic battery driver using IIO");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/power/generic-battery.h b/include/linux/power/generic-battery.h
> new file mode 100644
> index 0000000..7a43aa0
> --- /dev/null
> +++ b/include/linux/power/generic-battery.h
> @@ -0,0 +1,26 @@
> +/*
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef GENERIC_BATTERY_H
> +#define GENERIC_BATTERY_H
> +
> +#include <linux/power_supply.h>
> +
> +/**
> + * struct generic_platform_data - platform data for generic battery
> + * @battery_info: Information about the battery
> + * @cal_charge: platform callback to calculate charge
> + * @gpio_charge_finished: GPIO number used for interrupts
> + * @gpio_inverted: Is the gpio inverted?
> + */
> +struct generic_platform_data {
The name might be a bit to generic ;) I'd go for
generic_battery_platform_data or iio_battery_platform_data.
> + struct power_supply_info battery_info;
> + int (*cal_charge)(long);
> + int gpio_charge_finished;
> + int gpio_inverted;
> +};
> +
> +#endif /* GENERIC_BATTERY_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
