Re: [PATCH] IIO: Add basic MXS LRADC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Lars-Peter Clausen,

> On 07/19/2012 04:23 PM, Marek Vasut wrote:
> > Dear Lars-Peter Clausen,
> > 
> > Sorry for my late reply, got busy with other crazy stuff.
> > 
> > [...]
> > 
> >>>> Is there any reason not to use the mxs_lradc struct directly has the
> >>>> iio data?
> >>> 
> >>> I explained it below in the patch. I hope we'll eventually support the
> >>> delay triggers, which will need 4 separate IIO devices. And this is
> >>> where this structure will be augmented by other components.
> >> 
> >> Ok I saw the comment, but it wasn't obvious to me that delay channels
> >> will require multiple IIO devices. Might make sense to state this
> >> explicitly.
> > 
> > Fixed.
> > 
> >>>>> [...]
> >>>>> 
> >>>>> +
> >>>>> +/*
> >>>>> + * Channel management
> >>>>> + *
> >>>>> + * This involves crazy mapping between 8 virtual channels the CTRL4
> >>>>> register + * can harbor and 16 channels total this hardware supports.
> >>>>> + */
> >>>> 
> >>>> I suppose this means only a maximum 8 channels can be active at a
> >>>> time. I've recently posted a patch which makes it easy to implement
> >>>> such a restriction.
> >>>> http://www.spinics.net/lists/linux-iio/msg05936.html and
> >>>> http://www.spinics.net/lists/linux-iio/msg05935.html for an example
> >>>> validate callback implementation. In your case you'd check for
> >>>> bitmap_weight(...) <= 8. Those patches are not yet in IIO though.
> >>> 
> >>> This is good. When do you expect this to hit linux-next possibly? Or at
> >>> least linux-iio?
> >> 
> >> soon, hopefully.
> > 
> > So I checked this, not sure how it'll help me though.
> 
> Right now with your driver you can enable any combination of channels. If
> more than 8 channels are enabled and you start sampling it will fail, since
> not all channels can be mapped. With those patch you can implement a
> validate callback and check for bitmap_weight(scan_mask) <= 8. This will
> ensure that it is not possible to select more than 8 channels at once,
> which again means that starting sampling can't fail of this.

Ok, I fixed this one. One last thing that I don't really understand is this. I 
run generic_buffer.c to source samples from the LRADC. Is there any way to 
continuously sample them? Because right now, I get one sample and that's it, no 
more samples happen later on (I can 0 data in subsequent read() call).

Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux