Jon,
Peter raised the question below about this.
Now we have two varients of this patch. As it was original yours
Jon, could you rustle up a new version incorporating Peter's
one and if both of you sign off / ack it, I'll merge it.
Jonathan
On 6/13/2012 11:09 PM, Peter Meerwald wrote:
Add iio channel type and modifiers for Correlated Color Temperature
(CCT)
and RGBC (red/green/blue/clear) data.
+What:
/sys/bus/iio/devices/device[n]/in_intensity_clear[_input|_raw]
+What:
/sys/bus/iio/devices/device[n]/in_intensity_red[_input|_raw]
+What:
/sys/bus/iio/devices/device[n]/in_intensity_green[_input|_raw]
+What:
/sys/bus/iio/devices/device[n]/in_intensity_blue[_input|_raw]
+KernelVersion: 3.4.0
+Contact: linux-iio@xxxxxxxxxxxxxxx
+Description:
+ This property is supported by sensors that have a RGBC
+ sensing mode. This value should be the output from a reading
+ and if expressed in SI units, should include _input. If this
+ value is not in SI units (irradiance, uW/mm), then it should
+ include _raw.
should the irradiance unit be uW/mm^2 ??
or just W/m^2? Whichever people prefer! Good spot Peter.
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
