sensor has 4 channels (10-bit each, R/G/B and clear), sensitivity and gain is controlled in the driver by ext_info integration_time and CHAN_INFO_HARDWAREGAIN driver supports triggered buffer and IIO_CHAN_INFO_RAW to get the sensor data patch depends on IIO_MOD_LIGHT_RED etc, the patch providing that (http://permalink.gmane.org/gmane.linux.kernel.iio/4354) has not been merged yet, a new proposal is following v4: address comments by Lars-Peter Clausen * make sure trigger handler is exited with iio_trigger_notify_done() and IRQ_HANDLED * kfree()/kalloc() -> krealloc() v3: * fix warnings v2: address comments by Lars-Peter Clausen * buffer allocation now in update_scan_mode instead of in trigger handler * simplify trigger code (assume active_scan_mask is not empty, use for_each_set_bit, use iio_push_to_buffer) * reorder entry in Makefile and Kconfig * fix remove Signed-off-by: Peter Meerwald <pmeerw@xxxxxxxxxx> --- drivers/iio/light/Kconfig | 12 ++ drivers/iio/light/Makefile | 1 + drivers/iio/light/adjd_s311.c | 396 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 409 insertions(+) create mode 100644 drivers/iio/light/adjd_s311.c diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index f3ea90d..91d15d2 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -3,6 +3,18 @@ # menu "Light sensors" +config ADJD_S311 + tristate "ADJD-S311-CR999 digital color sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + depends on I2C + help + If you say yes here you get support for the Avago ADJD-S311-CR999 + digital color light sensor. + + This driver can also be built as a module. If so, the module + will be called adjd_s311. + config SENSORS_LM3533 tristate "LM3533 ambient light sensor" depends on MFD_LM3533 diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index 06fa4d3..13f8a78 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -2,5 +2,6 @@ # Makefile for IIO Light sensors # +obj-$(CONFIG_ADJD_S311) += adjd_s311.o obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o obj-$(CONFIG_VCNL4000) += vcnl4000.o diff --git a/drivers/iio/light/adjd_s311.c b/drivers/iio/light/adjd_s311.c new file mode 100644 index 0000000..029d6e6 --- /dev/null +++ b/drivers/iio/light/adjd_s311.c @@ -0,0 +1,396 @@ +/* + * adjd_s311.c - Support for ADJD-S311-CR999 digital color sensor + * + * Copyright (C) 2012 Peter Meerwald <pmeerw@xxxxxxxxxx> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * driver for ADJD-S311-CR999 digital color sensor (10-bit channels for + * red, green, blue, clear); 7-bit I2C slave address 0x74 + * + * limitations: no calibration, no offset mode, no sleep mode + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/bitmap.h> +#include <linux/err.h> +#include <linux/irq.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> +#include <linux/iio/triggered_buffer.h> + +#define ADJD_S311_DRV_NAME "adjd_s311" + +#define ADJD_S311_CTRL 0x00 +#define ADJD_S311_CONFIG 0x01 +#define ADJD_S311_CAP_RED 0x06 +#define ADJD_S311_CAP_GREEN 0x07 +#define ADJD_S311_CAP_BLUE 0x08 +#define ADJD_S311_CAP_CLEAR 0x09 +#define ADJD_S311_INT_RED_LO 0x0a +#define ADJD_S311_INT_RED_HI 0x0b +#define ADJD_S311_INT_GREEN_LO 0x0c +#define ADJD_S311_INT_GREEN_HI 0x0d +#define ADJD_S311_INT_BLUE_LO 0x0e +#define ADJD_S311_INT_BLUE_HI 0x0f +#define ADJD_S311_INT_CLEAR_LO 0x10 +#define ADJD_S311_INT_CLEAR_HI 0x11 +#define ADJD_S311_DATA_RED_LO 0x40 +#define ADJD_S311_DATA_RED_HI 0x41 +#define ADJD_S311_DATA_GREEN_LO 0x42 +#define ADJD_S311_DATA_GREEN_HI 0x43 +#define ADJD_S311_DATA_BLUE_LO 0x44 +#define ADJD_S311_DATA_BLUE_HI 0x45 +#define ADJD_S311_DATA_CLEAR_LO 0x46 +#define ADJD_S311_DATA_CLEAR_HI 0x47 +#define ADJD_S311_OFFSET_RED 0x48 +#define ADJD_S311_OFFSET_GREEN 0x49 +#define ADJD_S311_OFFSET_BLUE 0x4a +#define ADJD_S311_OFFSET_CLEAR 0x4b + +#define ADJD_S311_CTRL_GOFS 0x02 +#define ADJD_S311_CTRL_GSSR 0x01 +#define ADJD_S311_CAP_MASK 0x0f +#define ADJD_S311_INT_MASK 0x0fff +#define ADJD_S311_DATA_MASK 0x03ff + +struct adjd_s311_data { + struct i2c_client *client; + u16 *buffer; +}; + +enum adjd_s311_channel_idx { + IDX_RED, IDX_GREEN, IDX_BLUE, IDX_CLEAR +}; + +#define ADJD_S311_DATA_REG(chan) \ + (ADJD_S311_DATA_RED_LO + (chan) * 2) +#define ADJD_S311_INT_REG(chan) \ + (ADJD_S311_INT_RED_LO + (chan) * 2) +#define ADJD_S311_CAP_REG(chan) \ + (ADJD_S311_CAP_RED + (chan)) + +static int adjd_s311_req_data(struct iio_dev *indio_dev) +{ + struct adjd_s311_data *data = iio_priv(indio_dev); + int tries = 10; + + int ret = i2c_smbus_write_byte_data(data->client, ADJD_S311_CTRL, + ADJD_S311_CTRL_GSSR); + if (ret < 0) + return ret; + + while (tries--) { + ret = i2c_smbus_read_byte_data(data->client, ADJD_S311_CTRL); + if (ret < 0) + return ret; + if (!(ret & ADJD_S311_CTRL_GSSR)) + break; + msleep(20); + } + + if (tries < 0) { + dev_err(&data->client->dev, + "adjd_s311_req_data() failed, data not ready\n"); + return -EIO; + } + + return 0; +} + +static int adjd_s311_read_data(struct iio_dev *indio_dev, u8 reg, int *val) +{ + struct adjd_s311_data *data = iio_priv(indio_dev); + + int ret = adjd_s311_req_data(indio_dev); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(data->client, reg); + if (ret < 0) + return ret; + + *val = ret & ADJD_S311_DATA_MASK; + + return 0; +} + +static ssize_t adjd_s311_read_int_time(struct iio_dev *indio_dev, + uintptr_t private, const struct iio_chan_spec *chan, char *buf) +{ + struct adjd_s311_data *data = iio_priv(indio_dev); + s32 ret; + + ret = i2c_smbus_read_word_data(data->client, + ADJD_S311_INT_REG(chan->address)); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret & ADJD_S311_INT_MASK); +} + +static ssize_t adjd_s311_write_int_time(struct iio_dev *indio_dev, + uintptr_t private, const struct iio_chan_spec *chan, const char *buf, + size_t len) +{ + struct adjd_s311_data *data = iio_priv(indio_dev); + unsigned long int_time; + int ret; + + ret = kstrtoul(buf, 10, &int_time); + if (ret) + return ret; + + if (int_time > ADJD_S311_INT_MASK) + return -EINVAL; + + ret = i2c_smbus_write_word_data(data->client, + ADJD_S311_INT_REG(chan->address), int_time); + if (ret < 0) + return ret; + + return len; +} + +static irqreturn_t adjd_s311_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct adjd_s311_data *data = iio_priv(indio_dev); + struct iio_buffer *buffer = indio_dev->buffer; + int len = 0; + int i, j = 0; + + int ret = adjd_s311_req_data(indio_dev); + if (ret < 0) + goto done; + + for_each_set_bit(i, indio_dev->active_scan_mask, + indio_dev->masklength) { + + ret = i2c_smbus_read_word_data(data->client, + ADJD_S311_DATA_REG(i)); + if (ret < 0) + goto done; + + data->buffer[j++] = ret & ADJD_S311_DATA_MASK; + len += 2; + } + + if (indio_dev->scan_timestamp) + *(s64 *)((phys_addr_t)data->buffer + ALIGN(len, sizeof(s64))) + = pf->timestamp; + iio_push_to_buffer(buffer, (u8 *)data->buffer, pf->timestamp); + +done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static const struct iio_chan_spec_ext_info adjd_s311_ext_info[] = { + { + .name = "integration_time", + .read = adjd_s311_read_int_time, + .write = adjd_s311_write_int_time, + }, + { } +}; + +static const struct iio_chan_spec adjd_s311_channels[] = { + { + .type = IIO_INTENSITY, + .modified = 1, + .address = IDX_RED, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_HARDWAREGAIN_SEPARATE_BIT, + .channel2 = IIO_MOD_LIGHT_RED, + .scan_index = 0, + .scan_type = IIO_ST('u', 10, 16, 0), + .ext_info = adjd_s311_ext_info, + }, { + .type = IIO_INTENSITY, + .modified = 1, + .address = IDX_GREEN, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_HARDWAREGAIN_SEPARATE_BIT, + .channel2 = IIO_MOD_LIGHT_GREEN, + .scan_index = 1, + .scan_type = IIO_ST('u', 10, 16, 0), + .ext_info = adjd_s311_ext_info, + }, { + .type = IIO_INTENSITY, + .modified = 1, + .address = IDX_GREEN, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_HARDWAREGAIN_SEPARATE_BIT, + .channel2 = IIO_MOD_LIGHT_BLUE, + .scan_index = 2, + .scan_type = IIO_ST('u', 10, 16, 0), + .ext_info = adjd_s311_ext_info, + }, { + .type = IIO_INTENSITY, + .modified = 1, + .address = IDX_CLEAR, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_HARDWAREGAIN_SEPARATE_BIT, + .channel2 = IIO_MOD_LIGHT_CLEAR, + .scan_index = 3, + .scan_type = IIO_ST('u', 10, 16, 0), + .ext_info = adjd_s311_ext_info, + }, + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static int adjd_s311_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct adjd_s311_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = adjd_s311_read_data(indio_dev, chan->address, val); + if (ret < 0) + return ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_HARDWAREGAIN: + ret = i2c_smbus_read_byte_data(data->client, + ADJD_S311_CAP_REG(chan->address)); + if (ret < 0) + return ret; + *val = ret & ADJD_S311_CAP_MASK; + return IIO_VAL_INT; + } + return -EINVAL; +} + +static int adjd_s311_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct adjd_s311_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + if (val < 0 || val > ADJD_S311_CAP_MASK) + return -EINVAL; + + ret = i2c_smbus_write_byte_data(data->client, + ADJD_S311_CAP_REG(chan->address), val); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int adjd_s311_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask) +{ + struct adjd_s311_data *data = iio_priv(indio_dev); + data->buffer = krealloc(data->buffer, indio_dev->scan_bytes, + GFP_KERNEL); + if (!data->buffer) + return -ENOMEM; + + return 0; +} + +static const struct iio_info adjd_s311_info = { + .read_raw = adjd_s311_read_raw, + .write_raw = adjd_s311_write_raw, + .update_scan_mode = adjd_s311_update_scan_mode, + .driver_module = THIS_MODULE, +}; + +static int __devinit adjd_s311_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adjd_s311_data *data; + struct iio_dev *indio_dev; + int err; + + indio_dev = iio_device_alloc(sizeof(*data)); + if (indio_dev == NULL) { + err = -ENOMEM; + goto exit; + } + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &adjd_s311_info; + indio_dev->name = ADJD_S311_DRV_NAME; + indio_dev->channels = adjd_s311_channels; + indio_dev->num_channels = ARRAY_SIZE(adjd_s311_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + err = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time, + adjd_s311_trigger_handler, NULL); + if (err < 0) + goto exit_free_device; + + err = iio_device_register(indio_dev); + if (err) + goto exit_unreg_buffer; + + dev_info(&client->dev, "ADJD-S311 color sensor registered\n"); + + return 0; + +exit_unreg_buffer: + iio_triggered_buffer_cleanup(indio_dev); +exit_free_device: + iio_device_free(indio_dev); +exit: + return err; +} + +static int __devexit adjd_s311_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct adjd_s311_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + kfree(data->buffer); + iio_device_free(indio_dev); + + return 0; +} + +static const struct i2c_device_id adjd_s311_id[] = { + { "adjd_s311", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adjd_s311_id); + +static struct i2c_driver adjd_s311_driver = { + .driver = { + .name = ADJD_S311_DRV_NAME, + }, + .probe = adjd_s311_probe, + .remove = __devexit_p(adjd_s311_remove), + .id_table = adjd_s311_id, +}; +module_i2c_driver(adjd_s311_driver); + +MODULE_AUTHOR("Peter Meerwald <pmeerw@xxxxxxxxxx>"); +MODULE_DESCRIPTION("ADJD-S311 color sensor"); +MODULE_LICENSE("GPL"); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
