v3 : - Using TRIGGERRED BUFFER - Using MFD framework The sensor hub driver is submiited to drivers/hid. This contains core processing of hid sensor usage table, registers as an hid driver and adds registration function for routing data to individual sensor driver. So core driver independent of user mode interface method (IIO/input etc.) - Submiiting four drivers for Accelerometer-3D, Gyro-3D, Compass-3D and ALS. These uses IIO triggered buffer interface. They are childrens of hid sensor hub driver. They reside in iio/accel, iio/gyro iio/magnetometer and iio/light. - Still using driver/staging/iio. Not able to test with driver/iio. v2 : - Replaced Ring-SW with KFiFO - Accel-3d, Gyro-3D and Compass-3D uses 3 different channels for X, Y and Z - SysFS ( --- Changed "polling_interval" to sampling_frequency (IIO_DEV_ATTR_SAMP_FREQ) with units HZ --- Changed "sensitivity" to hyst_raw, which is already used by some ADC modules --- Removed "Activate". No longer need this. Using trigger state to activate/deactivate ) - Removed sysfs attributes for "xxx_offset". Instead using mask 0 in read_raw. So each sensor have only channels, sampling_frequency and hyst_raw as the ABI. - Additional patch to enable ST Micro sensor hub v1: Base implementation for comments srinivas pandruvada (6): HID Sensors: Add to special driver list HID-Sensors: Sensor framework HID-Sensors: Added accelerometer 3D HID-Sensors: Added Gyroscope 3D HID-Sensors: Added Compass 3D HID-Sensors: Added ALS drivers/hid/Kconfig | 18 + drivers/hid/Makefile | 1 + drivers/hid/hid-core.c | 10 + drivers/hid/hid-ids.h | 6 + drivers/hid/hid-sensor-hub.c | 883 ++++++++++++++++++++ drivers/staging/iio/accel/Kconfig | 10 + drivers/staging/iio/accel/Makefile | 3 + drivers/staging/iio/accel/hid-sensor-accel-3d.c | 537 ++++++++++++ drivers/staging/iio/gyro/Kconfig | 10 + drivers/staging/iio/gyro/Makefile | 3 + drivers/staging/iio/gyro/hid-sensor-gyro-3d.c | 537 ++++++++++++ drivers/staging/iio/light/Kconfig | 10 + drivers/staging/iio/light/Makefile | 2 + drivers/staging/iio/light/hid-sensor-als.c | 478 +++++++++++ drivers/staging/iio/magnetometer/Kconfig | 10 + drivers/staging/iio/magnetometer/Makefile | 2 + .../iio/magnetometer/hid-sensor-compass-3d.c | 538 ++++++++++++ include/linux/hid-sensor-hub.h | 99 +++ include/linux/hid-sensor-ids.h | 116 +++ 19 files changed, 3273 insertions(+), 0 deletions(-) create mode 100644 drivers/hid/hid-sensor-hub.c create mode 100644 drivers/staging/iio/accel/hid-sensor-accel-3d.c create mode 100644 drivers/staging/iio/gyro/hid-sensor-gyro-3d.c create mode 100644 drivers/staging/iio/light/hid-sensor-als.c create mode 100644 drivers/staging/iio/magnetometer/hid-sensor-compass-3d.c create mode 100644 include/linux/hid-sensor-hub.h create mode 100644 include/linux/hid-sensor-ids.h -- 1.7.7.6 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
