Use gpio_request_one api, it looks cleaner.
Signed-off-by: Leed Aguilar <leed.aguilar@xxxxxx>
Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx>
---
drivers/staging/iio/magnetometer/Kconfig | 2 +-
drivers/staging/iio/magnetometer/ak8975.c | 10 +---------
2 files changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
index b9d9325..df5e0d4 100644
--- a/drivers/staging/iio/magnetometer/Kconfig
+++ b/drivers/staging/iio/magnetometer/Kconfig
@@ -6,7 +6,7 @@ menu "Magnetometer sensors"
config SENSORS_AK8975
tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
depends on I2C
- depends on GENERIC_GPIO
+ depends on GPIOLIB
help
Say yes here to build support for Asahi Kasei AK8975 3-Axis
Magnetometer.
diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c
index 001b3bf..11bde3f 100644
--- a/drivers/staging/iio/magnetometer/ak8975.c
+++ b/drivers/staging/iio/magnetometer/ak8975.c
@@ -499,21 +499,13 @@ static int __devinit ak8975_probe(struct i2c_client *client,
/* We may not have a GPIO based IRQ to scan, that is fine, we will
poll if so */
if (gpio_is_valid(eoc_gpio)) {
- err = gpio_request(eoc_gpio, "ak_8975");
+ err = gpio_request_one(eoc_gpio, GPIOF_IN, "ak_8975");
if (err < 0) {
dev_err(&client->dev,
"failed to request GPIO %d, error %d\n",
eoc_gpio, err);
goto exit;
}
-
- err = gpio_direction_input(eoc_gpio);
- if (err < 0) {
- dev_err(&client->dev,
- "Failed to configure input direction for GPIO %d, error %d\n",
- eoc_gpio, err);
- goto exit_gpio;
- }
}
/* Register with IIO */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
