Use the new triggered buffer setup helper function to allocate and register buffer and pollfunc. Also as part of the conversion drop scan_timestamp being enabled by default, since it is a left over of an earlier cleanup. Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx> --- drivers/staging/iio/adc/Kconfig | 1 + drivers/staging/iio/adc/ad799x.h | 2 -- drivers/staging/iio/adc/ad799x_core.c | 25 +++++++------ drivers/staging/iio/adc/ad799x_ring.c | 63 ++------------------------------- 4 files changed, 19 insertions(+), 72 deletions(-) diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 36cca0e..6fa3264 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -66,6 +66,7 @@ config AD799X_RING_BUFFER depends on AD799X select IIO_BUFFER select IIO_KFIFO_BUF + select IIO_TRIGGERED_BUFFER help Say yes here to include ring buffer support in the AD799X ADC driver. diff --git a/drivers/staging/iio/adc/ad799x.h b/drivers/staging/iio/adc/ad799x.h index 99f8abe..3e363c4 100644 --- a/drivers/staging/iio/adc/ad799x.h +++ b/drivers/staging/iio/adc/ad799x.h @@ -120,8 +120,6 @@ struct ad799x_platform_data { u16 vref_mv; }; -int ad7997_8_set_scan_mode(struct ad799x_state *st, unsigned mask); - #ifdef CONFIG_AD799X_RING_BUFFER int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev); void ad799x_ring_cleanup(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c index 80e0c6e..2d4bda9 100644 --- a/drivers/staging/iio/adc/ad799x_core.c +++ b/drivers/staging/iio/adc/ad799x_core.c @@ -99,10 +99,21 @@ static int ad799x_i2c_write8(struct ad799x_state *st, u8 reg, u8 data) return ret; } -int ad7997_8_set_scan_mode(struct ad799x_state *st, unsigned mask) +static int ad7997_8_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask) { - return ad799x_i2c_write16(st, AD7998_CONF_REG, - st->config | (mask << AD799X_CHANNEL_SHIFT)); + struct ad799x_state *st = iio_priv(indio_dev); + + switch (st->id) { + case ad7997: + case ad7998: + return ad799x_i2c_write16(st, AD7998_CONF_REG, + st->config | (*scan_mask << AD799X_CHANNEL_SHIFT)); + default: + break; + } + + return 0; } static int ad799x_scan_direct(struct ad799x_state *st, unsigned ch) @@ -442,6 +453,7 @@ static const struct iio_info ad7993_4_7_8_info = { .read_event_value = &ad799x_read_event_value, .write_event_value = &ad799x_write_event_value, .driver_module = THIS_MODULE, + .update_scan_mode = ad7997_8_update_scan_mode, }; #define AD799X_EV_MASK (IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | \ @@ -887,12 +899,6 @@ static int __devinit ad799x_probe(struct i2c_client *client, if (ret) goto error_disable_reg; - ret = iio_buffer_register(indio_dev, - indio_dev->channels, - indio_dev->num_channels); - if (ret) - goto error_cleanup_ring; - if (client->irq > 0) { ret = request_threaded_irq(client->irq, NULL, @@ -934,7 +940,6 @@ static __devexit int ad799x_remove(struct i2c_client *client) if (client->irq > 0) free_irq(client->irq, indio_dev); - iio_buffer_unregister(indio_dev); ad799x_ring_cleanup(indio_dev); if (!IS_ERR(st->reg)) { regulator_disable(st->reg); diff --git a/drivers/staging/iio/adc/ad799x_ring.c b/drivers/staging/iio/adc/ad799x_ring.c index 1c7ff44..da8d468 100644 --- a/drivers/staging/iio/adc/ad799x_ring.c +++ b/drivers/staging/iio/adc/ad799x_ring.c @@ -24,27 +24,6 @@ #include "ad799x.h" /** - * ad799x_ring_preenable() setup the parameters of the ring before enabling - * - * The complex nature of the setting of the number of bytes per datum is due - * to this driver currently ensuring that the timestamp is stored at an 8 - * byte boundary. - **/ -static int ad799x_ring_preenable(struct iio_dev *indio_dev) -{ - struct ad799x_state *st = iio_priv(indio_dev); - /* - * Need to figure out the current mode based upon the requested - * scan mask in iio_dev - */ - - if (st->id == ad7997 || st->id == ad7998) - ad7997_8_set_scan_mode(st, *indio_dev->active_scan_mask); - - return iio_sw_buffer_preenable(indio_dev); -} - -/** * ad799x_trigger_handler() bh of trigger launched polling to ring buffer * * Currently there is no option in this driver to disable the saving of @@ -110,49 +89,13 @@ out: return IRQ_HANDLED; } -static const struct iio_buffer_setup_ops ad799x_buf_setup_ops = { - .preenable = &ad799x_ring_preenable, - .postenable = &iio_triggered_buffer_postenable, - .predisable = &iio_triggered_buffer_predisable, -}; - int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev) { - int ret = 0; - - indio_dev->buffer = iio_kfifo_allocate(indio_dev); - if (!indio_dev->buffer) { - ret = -ENOMEM; - goto error_ret; - } - indio_dev->pollfunc = iio_alloc_pollfunc(NULL, - &ad799x_trigger_handler, - IRQF_ONESHOT, - indio_dev, - "%s_consumer%d", - indio_dev->name, - indio_dev->id); - if (indio_dev->pollfunc == NULL) { - ret = -ENOMEM; - goto error_deallocate_kfifo; - } - - /* Ring buffer functions - here trigger setup related */ - indio_dev->setup_ops = &ad799x_buf_setup_ops; - indio_dev->buffer->scan_timestamp = true; - - /* Flag that polled ring buffering is possible */ - indio_dev->modes |= INDIO_BUFFER_TRIGGERED; - return 0; - -error_deallocate_kfifo: - iio_kfifo_free(indio_dev->buffer); -error_ret: - return ret; + return iio_triggered_buffer_setup(indio_dev, NULL, + &ad799x_trigger_handler, NULL); } void ad799x_ring_cleanup(struct iio_dev *indio_dev) { - iio_dealloc_pollfunc(indio_dev->pollfunc); - iio_kfifo_free(indio_dev->buffer); + iio_triggered_buffer_cleanup(indio_dev); } -- 1.7.10 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html