On 04/13/2012 12:04 PM, Jonathan Cameron wrote: > This is as per Lars-Peter's suggestion + actually covers 'all' (I hope) > of the drivers rather than missing cdc and impedance directories. Ok, this one is not so easy to verify. I tried to and couldn't find anything expect two minor formatting issues. So feel free to add Acked-by: Lars-Peter Clausen <lars@xxxxxxxxxx> to all of the patches. But you missed the meter subdirectory and the dummy driver, I'll send the patches as a follow up. > > So now we have IIO_CHAN_INFO_RAW and IIO_CHAN_INFO_PROCESSED. > > This lets us drop a chunk of special case logic and generally cleans > things up. On top of this allows channels with no reading or writing > abilities which was the original point. > > Jonathan > > original patch message was: > > Dear All, > > This came out of a discussion about Michael's variable gain amplifier > driver the other day. We have devices that have a channel that we > can't actually read, but know other things about. (there are other > cases that we have previously fudged around). > > Anyhow, here is the promised series making the value optional. > Has recieved limited testing and I may well have fried someones > driver so please do take a look and test test test! > > Dependent on the IIO_CHAN removal series. > > Note I'll probably handle this set a little differently from > usual and send the first 9 to Greg asap, but hold the 10th > that actually makes them active until I'm sure there aren't > any drivers going to cross with it and end up broken. > > Jonathan > > Jonathan Cameron (13): > staging:iio: add a raw and processed elements to info_mask > staging:iio:accel Add IIO_CHAN_INFO_RAW entries to all drivers. > staging:iio:adc Add IIO_CHAN_INFO_RAW entries to all drivers. > staging:iio:dac Add IIO_CHAN_INFO_RAW entries to all drivers. > staging:iio:gyro Add IIO_CHAN_INFO_RAW entries to all drivers. > staging:iio:imu Add IIO_CHAN_INFO_RAW entries to all drivers. > staging:iio:light Add IIO_CHAN_INFO_RAW/PROCESSED entries to all > drivers. > staging:iio:magnetometer Add IIO_CHAN_INFO_RAW entries to all > drivers. > staging:iio:resolver Add IIO_CHAN_INFO_RAW entries to all drivers. > staging:iio:impedance Add IIO_CHAN_INFO_RAW/PROCESSED entries to all > drivers. > staging:iio:cdc Add IIO_CHAN_INFO_RAW/PROCESSED entries to all > drivers. > staging:iio: Make read / write attributes for channel values > optional. > staging:iio: drop procesed_val element of chan_spec. > > drivers/staging/iio/accel/adis16201_core.c | 25 +++-- > drivers/staging/iio/accel/adis16203_core.c | 17 ++- > drivers/staging/iio/accel/adis16204_core.c | 17 ++- > drivers/staging/iio/accel/adis16209_core.c | 24 +++-- > drivers/staging/iio/accel/adis16220_core.c | 15 ++- > drivers/staging/iio/accel/adis16240_core.c | 18 +++- > drivers/staging/iio/accel/kxsd9.c | 6 +- > drivers/staging/iio/accel/lis3l02dq_core.c | 5 +- > drivers/staging/iio/accel/sca3000_core.c | 4 +- > drivers/staging/iio/adc/ad7192.c | 11 ++- > drivers/staging/iio/adc/ad7280a.c | 7 +- > drivers/staging/iio/adc/ad7291.c | 8 +- > drivers/staging/iio/adc/ad7298_core.c | 8 +- > drivers/staging/iio/adc/ad7476_core.c | 5 +- > drivers/staging/iio/adc/ad7606_core.c | 19 ++-- > drivers/staging/iio/adc/ad7780.c | 8 +- > drivers/staging/iio/adc/ad7793.c | 38 +++++--- > drivers/staging/iio/adc/ad7887_core.c | 8 +- > drivers/staging/iio/adc/ad799x_core.c | 40 +++++++- > drivers/staging/iio/adc/lpc32xx_adc.c | 15 ++-- > drivers/staging/iio/adc/max1363_core.c | 5 +- > drivers/staging/iio/adc/spear_adc.c | 5 +- > drivers/staging/iio/cdc/ad7150.c | 8 +- > drivers/staging/iio/cdc/ad7152.c | 14 ++- > drivers/staging/iio/cdc/ad7746.c | 25 +++-- > drivers/staging/iio/dac/ad5064.c | 7 +- > drivers/staging/iio/dac/ad5360.c | 7 +- > drivers/staging/iio/dac/ad5380.c | 7 +- > drivers/staging/iio/dac/ad5421.c | 7 +- > drivers/staging/iio/dac/ad5446.c | 5 +- > drivers/staging/iio/dac/ad5504.c | 7 +- > drivers/staging/iio/dac/ad5624r_spi.c | 5 +- > drivers/staging/iio/dac/ad5686.c | 7 +- > drivers/staging/iio/dac/ad5764.c | 7 +- > drivers/staging/iio/dac/ad5791.c | 7 +- > drivers/staging/iio/gyro/adis16060_core.c | 8 +- > drivers/staging/iio/gyro/adis16080_core.c | 6 +- > drivers/staging/iio/gyro/adis16130_core.c | 2 + > drivers/staging/iio/gyro/adis16260_core.c | 15 ++- > drivers/staging/iio/gyro/adxrs450_core.c | 14 ++- > drivers/staging/iio/iio.h | 22 +++-- > drivers/staging/iio/impedance-analyzer/ad5933.c | 11 ++- > drivers/staging/iio/imu/adis16400_core.c | 121 +++++++++++++++-------- > drivers/staging/iio/industrialio-core.c | 24 +---- > drivers/staging/iio/light/isl29018.c | 9 +- > drivers/staging/iio/light/tsl2563.c | 11 ++- > drivers/staging/iio/magnetometer/ak8975.c | 5 +- > drivers/staging/iio/magnetometer/hmc5843.c | 5 +- > drivers/staging/iio/resolver/ad2s1200.c | 2 + > drivers/staging/iio/resolver/ad2s1210.c | 2 + > drivers/staging/iio/resolver/ad2s90.c | 1 + > 51 files changed, 436 insertions(+), 243 deletions(-) > > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
