On 4/12/2012 8:08 AM, Laxman Dewangan wrote:
Add the sysfs proximity_sampling_period for sampling period of
proximity sensing.
Signed-off-by: Laxman Dewangan<ldewangan@xxxxxxxxxx>
---
.../staging/iio/Documentation/sysfs-bus-iio-light | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
index edbf470..9d6108b 100644
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
@@ -83,3 +83,10 @@ Description:
Hardware or software applied calibration scale factor assumed
to account for attenuation due to industrial design (glass
filters or aperture holes).
+
+What: /sys/bus/iio/devices/device[n]/proximity_sampling_period
+KernelVersion: 3.5
+Contact: linux-iio@xxxxxxxxxxxxxxx
+Description:
+ Hardware dependent mode for proximity sensor device to set/get
+ the sampling rate of proximity sensing and conversion.
Ah, that explains what it is. Sorry, use
in_proximitiy0_sampling_frequency to provide equivalent
control please. Might be a pain here, but this interface will just
provide the same info as the existing
one in a different form. Note that sampling_frequency is documented as
a general one, but can
be extended to individual channels.
Actually add it to the iio-core as an element in the info_mask as I
doubt this will be the last time
we see this control. This will need to be a precursor patch to the
driver obviously.
IIO_CHAN_INFO_SAMP_FREQ and the relevant shared and separate macros need
to go in
iio.h + the text entry in industrialio-core.c
If you like I can do this but it'll be quicker if you do :)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
