This patch adds platform data for the AT91 ADC driver support for
the AT91SAM9G20-EK board.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Cc: Patrice Vilchez <patrice.vilchez@xxxxxxxxx>
Cc: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
---
arch/arm/mach-at91/at91sam9260_devices.c | 53 ++++++++++++++++++++++++++++++
arch/arm/mach-at91/board-sam9g20ek.c | 13 +++++++
2 files changed, 66 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 7e5651e..08464fe 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -17,6 +17,8 @@
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
+#include <linux/platform_data/at91_adc.h>
+
#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91sam9260.h>
@@ -1366,6 +1368,57 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
void __init at91_add_device_cf(struct at91_cf_data * data) {}
#endif
+/* --------------------------------------------------------------------
+ * ADCs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_ADC) || defined(CONFIG_AT91_ADC_MODULE)
+static struct at91_adc_data adc_data;
+
+static struct resource adc_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_ADC,
+ .end = AT91SAM9260_BASE_ADC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_ADC,
+ .end = AT91SAM9260_ID_ADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_adc_device = {
+ .name = "at91_adc",
+ .id = -1,
+ .dev = {
+ .platform_data = &adc_data,
+ },
+ .resource = adc_resources,
+ .num_resources = ARRAY_SIZE(adc_resources),
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
+{
+ if (!data)
+ return;
+
+ if (test_bit(0, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PC0, 0);
+ if (test_bit(1, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PC1, 0);
+ if (test_bit(2, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PC2, 0);
+ if (test_bit(3, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PC3, 0);
+
+ adc_data = *data;
+ platform_device_register(&at91_adc_device);
+}
+#else
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
+#endif
+
/* -------------------------------------------------------------------- */
/*
* These devices are always present and don't need any board-specific
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 8923ec9..2ce4e26 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -32,6 +32,8 @@
#include <linux/regulator/fixed.h>
#include <linux/regulator/consumer.h>
+#include <linux/platform_data/at91_adc.h>
+
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -318,6 +320,15 @@ static void __init ek_add_device_buttons(void)
static void __init ek_add_device_buttons(void) {}
#endif
+/*
+ * ADCs
+ */
+
+static struct at91_adc_data ek_adc_data = {
+ .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3),
+ .vref = 3300,
+};
+
#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
REGULATOR_SUPPLY("AVDD", "0-001b"),
@@ -393,6 +404,8 @@ static void __init ek_board_init(void)
ek_add_device_gpio_leds();
/* Push Buttons */
ek_add_device_buttons();
+ /* ADCs */
+ at91_add_device_adc(&ek_adc_data);
/* PCK0 provides MCLK to the WM8731 */
at91_set_B_periph(AT91_PIN_PC1, 0);
/* SSC (for WM8731) */
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
