From: Michael Hennerich <michael.hennerich@xxxxxxxxxx> Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx> --- drivers/staging/iio/adc/Kconfig | 11 ++ drivers/staging/iio/adc/Makefile | 1 + drivers/staging/iio/adc/ad7780.c | 324 ++++++++++++++++++++++++++++++++++++++ drivers/staging/iio/adc/ad7780.h | 20 +++ 4 files changed, 356 insertions(+), 0 deletions(-) create mode 100644 drivers/staging/iio/adc/ad7780.c create mode 100644 drivers/staging/iio/adc/ad7780.h diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 6692a3d..4159389 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -142,6 +142,17 @@ config AD7887 To compile this driver as a module, choose M here: the module will be called ad7887. +config AD7780 + tristate "Analog Devices AD7780 AD7781 ADC driver" + depends on SPI + help + Say yes here to build support for Analog Devices + AD7780 and AD7781 SPI analog to digital convertors (ADC). + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7780. + config AD7745 tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver" depends on I2C diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile index 31067de..1d9b3f5 100644 --- a/drivers/staging/iio/adc/Makefile +++ b/drivers/staging/iio/adc/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_AD7152) += ad7152.o obj-$(CONFIG_AD7291) += ad7291.o obj-$(CONFIG_AD7314) += ad7314.o obj-$(CONFIG_AD7745) += ad7745.o +obj-$(CONFIG_AD7780) += ad7780.o obj-$(CONFIG_AD7816) += ad7816.o obj-$(CONFIG_ADT75) += adt75.o obj-$(CONFIG_ADT7310) += adt7310.o diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c new file mode 100644 index 0000000..eba733d --- /dev/null +++ b/drivers/staging/iio/adc/ad7780.c @@ -0,0 +1,324 @@ +/* + * AD7780/AD7781 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/list.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> +#include <linux/err.h> +#include <linux/sched.h> +#include <linux/gpio.h> + +#include "../iio.h" +#include "../sysfs.h" +#include "../ring_generic.h" +#include "adc.h" + +#include "ad7780.h" + +#define AD7780_RDY (1 << 7) +#define AD7780_FILTER (1 << 6) +#define AD7780_ERR (1 << 5) +#define AD7780_ID1 (1 << 4) +#define AD7780_ID0 (1 << 3) +#define AD7780_GAIN (1 << 2) +#define AD7780_PAT1 (1 << 1) +#define AD7780_PAT0 (1 << 0) + +struct ad7780_chip_info { + u8 bits; + u8 storagebits; + u8 res_shift; +}; + +struct ad7780_state { + struct iio_dev *indio_dev; + struct spi_device *spi; + const struct ad7780_chip_info *chip_info; + struct regulator *reg; + struct ad7780_platform_data *pdata; + wait_queue_head_t wq_data_avail; + bool done; + u16 int_vref_mv; + struct spi_transfer xfer; + struct spi_message msg; + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + unsigned char data[4] ____cacheline_aligned; +}; + +enum ad7780_supported_device_ids { + ID_AD7780, + ID_AD7781, +}; + +static int ad7780_read(struct ad7780_state *st, int *val) +{ + int ret; + + spi_bus_lock(st->spi->master); + + enable_irq(st->spi->irq); + st->done = false; + gpio_set_value(st->pdata->gpio_pdrst, 1); + + ret = wait_event_interruptible(st->wq_data_avail, st->done); + disable_irq_nosync(st->spi->irq); + if (ret) + goto out; + + ret = spi_sync_locked(st->spi, &st->msg); + *val = be32_to_cpu(st->data); +out: + gpio_set_value(st->pdata->gpio_pdrst, 0); + spi_bus_unlock(st->spi->master); + + return ret; +} + +static ssize_t ad7780_scan(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *dev_info = dev_get_drvdata(dev); + struct ad7780_state *st = dev_info->dev_data; + int ret, val, smpl; + + mutex_lock(&dev_info->mlock); + ret = ad7780_read(st, &smpl); + mutex_unlock(&dev_info->mlock); + + if (ret < 0) + return ret; + + if ((smpl & AD7780_ERR) || + !((smpl & AD7780_PAT0) && !(smpl & AD7780_PAT1))) + return -EIO; + + val = (smpl >> st->chip_info->res_shift) & + ((1 << (st->chip_info->bits)) - 1); + val -= (1 << (st->chip_info->bits - 1)); + + if (!(smpl & AD7780_GAIN)) + val *= 128; + + return sprintf(buf, "%d\n", val); +} +static IIO_DEV_ATTR_IN_RAW(0, ad7780_scan, 0); + +static ssize_t ad7780_show_scale(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *dev_info = dev_get_drvdata(dev); + struct ad7780_state *st = iio_dev_get_devdata(dev_info); + /* Corresponds to Vref / 2^(bits-1) */ + unsigned int scale = (st->int_vref_mv * 100000) >> + (st->chip_info->bits - 1); + + return sprintf(buf, "%d.%05d\n", scale / 100000, scale % 100000); +} +static IIO_DEVICE_ATTR(in_scale, S_IRUGO, ad7780_show_scale, NULL, 0); + +static ssize_t ad7780_show_name(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *dev_info = dev_get_drvdata(dev); + struct ad7780_state *st = iio_dev_get_devdata(dev_info); + + return sprintf(buf, "%s\n", spi_get_device_id(st->spi)->name); +} +static IIO_DEVICE_ATTR(name, S_IRUGO, ad7780_show_name, NULL, 0); + +static struct attribute *ad7780_attributes[] = { + &iio_dev_attr_in0_raw.dev_attr.attr, + &iio_dev_attr_in_scale.dev_attr.attr, + &iio_dev_attr_name.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad7780_attribute_group = { + .attrs = ad7780_attributes, +}; + +static const struct ad7780_chip_info ad7780_chip_info_tbl[] = { + [ID_AD7780] = { + .bits = 24, + .storagebits = 32, + .res_shift = 8, + }, + [ID_AD7781] = { + .bits = 20, + .storagebits = 32, + .res_shift = 12, + }, +}; + +/** + * Interrupt handler + */ +static irqreturn_t ad7780_interrupt(int irq, void *dev_id) +{ + struct ad7780_state *st = dev_id; + + st->done = true; + wake_up_interruptible(&st->wq_data_avail); + + return IRQ_HANDLED; +}; + +static int __devinit ad7780_probe(struct spi_device *spi) +{ + struct ad7780_platform_data *pdata = spi->dev.platform_data; + struct ad7780_state *st; + int ret, voltage_uv = 0; + + st = kzalloc(sizeof(*st), GFP_KERNEL); + if (st == NULL) { + ret = -ENOMEM; + goto error_ret; + } + + st->reg = regulator_get(&spi->dev, "vcc"); + if (!IS_ERR(st->reg)) { + ret = regulator_enable(st->reg); + if (ret) + goto error_put_reg; + + voltage_uv = regulator_get_voltage(st->reg); + } + + st->chip_info = + &ad7780_chip_info_tbl[spi_get_device_id(spi)->driver_data]; + + st->pdata = pdata; + + if (pdata && pdata->vref_mv) + st->int_vref_mv = pdata->vref_mv; + else if (voltage_uv) + st->int_vref_mv = voltage_uv / 1000; + else + dev_warn(&spi->dev, "reference voltage unspecified\n"); + + spi_set_drvdata(spi, st); + st->spi = spi; + + st->indio_dev = iio_allocate_device(); + if (st->indio_dev == NULL) { + ret = -ENOMEM; + goto error_disable_reg; + } + + /* Establish that the iio_dev is a child of the spi device */ + st->indio_dev->dev.parent = &spi->dev; + st->indio_dev->attrs = &ad7780_attribute_group; + st->indio_dev->dev_data = (void *)(st); + st->indio_dev->driver_module = THIS_MODULE; + st->indio_dev->modes = INDIO_DIRECT_MODE; + + init_waitqueue_head(&st->wq_data_avail); + + /* Setup default message */ + + st->xfer.rx_buf = &st->data; + st->xfer.len = st->chip_info->storagebits / 8; + + spi_message_init(&st->msg); + spi_message_add_tail(&st->xfer, &st->msg); + + ret = gpio_request_one(st->pdata->gpio_pdrst, GPIOF_OUT_INIT_LOW, + "AD7877 /PDRST"); + if (ret) { + dev_err(&spi->dev, "failed to request GPIO PDRST\n"); + goto error_free_device; + } + + ret = request_irq(spi->irq, ad7780_interrupt, + IRQF_TRIGGER_FALLING, spi_get_device_id(spi)->name, st); + if (ret) + goto error_free_device; + + disable_irq(spi->irq); + + ret = iio_device_register(st->indio_dev); + if (ret) + goto error_free_irq; + + return 0; + +error_free_irq: + free_irq(spi->irq, st); + +error_free_device: + iio_free_device(st->indio_dev); +error_disable_reg: + if (!IS_ERR(st->reg)) + regulator_disable(st->reg); +error_put_reg: + if (!IS_ERR(st->reg)) + regulator_put(st->reg); + kfree(st); +error_ret: + return ret; +} + +static int ad7780_remove(struct spi_device *spi) +{ + struct ad7780_state *st = spi_get_drvdata(spi); + struct iio_dev *indio_dev = st->indio_dev; + free_irq(spi->irq, st); + gpio_free(st->pdata->gpio_pdrst); + iio_device_unregister(indio_dev); + if (!IS_ERR(st->reg)) { + regulator_disable(st->reg); + regulator_put(st->reg); + } + kfree(st); + return 0; +} + +static const struct spi_device_id ad7780_id[] = { + {"ad7780", ID_AD7780}, + {"ad7781", ID_AD7781}, + {} +}; + +static struct spi_driver ad7780_driver = { + .driver = { + .name = "ad7780", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = ad7780_probe, + .remove = __devexit_p(ad7780_remove), + .id_table = ad7780_id, +}; + +static int __init ad7780_init(void) +{ + return spi_register_driver(&ad7780_driver); +} +module_init(ad7780_init); + +static void __exit ad7780_exit(void) +{ + spi_unregister_driver(&ad7780_driver); +} +module_exit(ad7780_exit); + +MODULE_AUTHOR("Michael Hennerich <hennerich@xxxxxxxxxxxxxxxxxxxx>"); +MODULE_DESCRIPTION("Analog Devices AD7780/1 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/adc/ad7780.h b/drivers/staging/iio/adc/ad7780.h new file mode 100644 index 0000000..ec77486 --- /dev/null +++ b/drivers/staging/iio/adc/ad7780.h @@ -0,0 +1,20 @@ +/* + * AD7780/AD7781 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ +#ifndef IIO_ADC_AD7780_H_ +#define IIO_ADC_AD7780_H_ + +/* + * TODO: struct ad7780_platform_data needs to go into include/linux/iio + */ + +struct ad7780_platform_data { + u16 vref_mv; + int gpio_pdrst; +}; + +#endif /* IIO_ADC_AD7780_H_ */ -- 1.6.0.2 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html