From: Michael Hennerich <michael.hennerich@xxxxxxxxxx> These drivers don't conform with the API for such devices. Therefore they are temporarily removed until they are fixed up anytime later. Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx> --- drivers/staging/iio/dds/Kconfig | 37 +--- drivers/staging/iio/dds/Makefile | 5 - drivers/staging/iio/dds/ad5930.c | 170 --------------- drivers/staging/iio/dds/ad9850.c | 156 -------------- drivers/staging/iio/dds/ad9852.c | 305 -------------------------- drivers/staging/iio/dds/ad9910.c | 440 -------------------------------------- drivers/staging/iio/dds/ad9951.c | 249 --------------------- 7 files changed, 1 insertions(+), 1361 deletions(-) delete mode 100644 drivers/staging/iio/dds/ad5930.c delete mode 100644 drivers/staging/iio/dds/ad9850.c delete mode 100644 drivers/staging/iio/dds/ad9852.c delete mode 100644 drivers/staging/iio/dds/ad9910.c delete mode 100644 drivers/staging/iio/dds/ad9951.c diff --git a/drivers/staging/iio/dds/Kconfig b/drivers/staging/iio/dds/Kconfig index 06b6f3a..880eb1d 100644 --- a/drivers/staging/iio/dds/Kconfig +++ b/drivers/staging/iio/dds/Kconfig @@ -3,13 +3,6 @@ # comment "Direct Digital Synthesis" -config AD5930 - tristate "Analog Devices ad5930/5932 driver" - depends on SPI - help - Say yes here to build support for Analog Devices DDS chip - ad5930/ad5932, provides direct access via sysfs. - config AD9832 tristate "Analog Devices ad9832/5 driver" depends on SPI @@ -21,7 +14,7 @@ config AD9832 module will be called ad9832. config AD9834 - tristate "Analog Devices ad9833/4/ driver" + tristate "Analog Devices ad9833/4 driver" depends on SPI help Say yes here to build support for Analog Devices DDS chip @@ -29,31 +22,3 @@ config AD9834 To compile this driver as a module, choose M here: the module will be called ad9834. - -config AD9850 - tristate "Analog Devices ad9850/1 driver" - depends on SPI - help - Say yes here to build support for Analog Devices DDS chip - ad9850/1, provides direct access via sysfs. - -config AD9852 - tristate "Analog Devices ad9852/4 driver" - depends on SPI - help - Say yes here to build support for Analog Devices DDS chip - ad9852/4, provides direct access via sysfs. - -config AD9910 - tristate "Analog Devices ad9910 driver" - depends on SPI - help - Say yes here to build support for Analog Devices DDS chip - ad9910, provides direct access via sysfs. - -config AD9951 - tristate "Analog Devices ad9951 driver" - depends on SPI - help - Say yes here to build support for Analog Devices DDS chip - ad9951, provides direct access via sysfs. diff --git a/drivers/staging/iio/dds/Makefile b/drivers/staging/iio/dds/Makefile index 1477461..e5dbcfc 100644 --- a/drivers/staging/iio/dds/Makefile +++ b/drivers/staging/iio/dds/Makefile @@ -2,10 +2,5 @@ # Makefile for Direct Digital Synthesis drivers # -obj-$(CONFIG_AD5930) += ad5930.o obj-$(CONFIG_AD9832) += ad9832.o obj-$(CONFIG_AD9834) += ad9834.o -obj-$(CONFIG_AD9850) += ad9850.o -obj-$(CONFIG_AD9852) += ad9852.o -obj-$(CONFIG_AD9910) += ad9910.o -obj-$(CONFIG_AD9951) += ad9951.o diff --git a/drivers/staging/iio/dds/ad5930.c b/drivers/staging/iio/dds/ad5930.c deleted file mode 100644 index f80039c..0000000 --- a/drivers/staging/iio/dds/ad5930.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Driver for ADI Direct Digital Synthesis ad5930 - * - * Copyright (c) 2010-2010 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/types.h> -#include <linux/mutex.h> -#include <linux/device.h> -#include <linux/spi/spi.h> -#include <linux/slab.h> -#include <linux/sysfs.h> - -#include "../iio.h" -#include "../sysfs.h" - -#define DRV_NAME "ad5930" - -#define value_mask (u16)0xf000 -#define addr_shift 12 - -/* Register format: 4 bits addr + 12 bits value */ -struct ad5903_config { - u16 control; - u16 incnum; - u16 frqdelt[2]; - u16 incitvl; - u16 buritvl; - u16 strtfrq[2]; -}; - -struct ad5930_state { - struct mutex lock; - struct iio_dev *idev; - struct spi_device *sdev; -}; - -static ssize_t ad5930_set_parameter(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct spi_message msg; - struct spi_transfer xfer; - int ret; - struct ad5903_config *config = (struct ad5903_config *)buf; - struct iio_dev *idev = dev_get_drvdata(dev); - struct ad5930_state *st = idev->dev_data; - - config->control = (config->control & ~value_mask); - config->incnum = (config->control & ~value_mask) | (1 << addr_shift); - config->frqdelt[0] = (config->control & ~value_mask) | (2 << addr_shift); - config->frqdelt[1] = (config->control & ~value_mask) | 3 << addr_shift; - config->incitvl = (config->control & ~value_mask) | 4 << addr_shift; - config->buritvl = (config->control & ~value_mask) | 8 << addr_shift; - config->strtfrq[0] = (config->control & ~value_mask) | 0xc << addr_shift; - config->strtfrq[1] = (config->control & ~value_mask) | 0xd << addr_shift; - - xfer.len = len; - xfer.tx_buf = config; - mutex_lock(&st->lock); - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : len; -} - -static IIO_DEVICE_ATTR(dds, S_IWUSR, NULL, ad5930_set_parameter, 0); - -static struct attribute *ad5930_attributes[] = { - &iio_dev_attr_dds.dev_attr.attr, - NULL, -}; - -static const struct attribute_group ad5930_attribute_group = { - .name = DRV_NAME, - .attrs = ad5930_attributes, -}; - -static int __devinit ad5930_probe(struct spi_device *spi) -{ - struct ad5930_state *st; - int ret = 0; - - st = kzalloc(sizeof(*st), GFP_KERNEL); - if (st == NULL) { - ret = -ENOMEM; - goto error_ret; - } - spi_set_drvdata(spi, st); - - mutex_init(&st->lock); - st->sdev = spi; - - st->idev = iio_allocate_device(); - if (st->idev == NULL) { - ret = -ENOMEM; - goto error_free_st; - } - st->idev->dev.parent = &spi->dev; - st->idev->num_interrupt_lines = 0; - st->idev->event_attrs = NULL; - - st->idev->attrs = &ad5930_attribute_group; - st->idev->dev_data = (void *)(st); - st->idev->driver_module = THIS_MODULE; - st->idev->modes = INDIO_DIRECT_MODE; - - ret = iio_device_register(st->idev); - if (ret) - goto error_free_dev; - spi->max_speed_hz = 2000000; - spi->mode = SPI_MODE_3; - spi->bits_per_word = 16; - spi_setup(spi); - - return 0; - -error_free_dev: - iio_free_device(st->idev); -error_free_st: - kfree(st); -error_ret: - return ret; -} - -static int __devexit ad5930_remove(struct spi_device *spi) -{ - struct ad5930_state *st = spi_get_drvdata(spi); - - iio_device_unregister(st->idev); - kfree(st); - - return 0; -} - -static struct spi_driver ad5930_driver = { - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, - .probe = ad5930_probe, - .remove = __devexit_p(ad5930_remove), -}; - -static __init int ad5930_spi_init(void) -{ - return spi_register_driver(&ad5930_driver); -} -module_init(ad5930_spi_init); - -static __exit void ad5930_spi_exit(void) -{ - spi_unregister_driver(&ad5930_driver); -} -module_exit(ad5930_spi_exit); - -MODULE_AUTHOR("Cliff Cai"); -MODULE_DESCRIPTION("Analog Devices ad5930 driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/dds/ad9850.c b/drivers/staging/iio/dds/ad9850.c deleted file mode 100644 index b259bfe..0000000 --- a/drivers/staging/iio/dds/ad9850.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Driver for ADI Direct Digital Synthesis ad9850 - * - * Copyright (c) 2010-2010 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/types.h> -#include <linux/mutex.h> -#include <linux/device.h> -#include <linux/spi/spi.h> -#include <linux/slab.h> -#include <linux/sysfs.h> - -#include "../iio.h" -#include "../sysfs.h" - -#define DRV_NAME "ad9850" - -#define value_mask (u16)0xf000 -#define addr_shift 12 - -/* Register format: 4 bits addr + 12 bits value */ -struct ad9850_config { - u8 control[5]; -}; - -struct ad9850_state { - struct mutex lock; - struct iio_dev *idev; - struct spi_device *sdev; -}; - -static ssize_t ad9850_set_parameter(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct spi_message msg; - struct spi_transfer xfer; - int ret; - struct ad9850_config *config = (struct ad9850_config *)buf; - struct iio_dev *idev = dev_get_drvdata(dev); - struct ad9850_state *st = idev->dev_data; - - xfer.len = len; - xfer.tx_buf = config; - mutex_lock(&st->lock); - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : len; -} - -static IIO_DEVICE_ATTR(dds, S_IWUSR, NULL, ad9850_set_parameter, 0); - -static struct attribute *ad9850_attributes[] = { - &iio_dev_attr_dds.dev_attr.attr, - NULL, -}; - -static const struct attribute_group ad9850_attribute_group = { - .name = DRV_NAME, - .attrs = ad9850_attributes, -}; - -static int __devinit ad9850_probe(struct spi_device *spi) -{ - struct ad9850_state *st; - int ret = 0; - - st = kzalloc(sizeof(*st), GFP_KERNEL); - if (st == NULL) { - ret = -ENOMEM; - goto error_ret; - } - spi_set_drvdata(spi, st); - - mutex_init(&st->lock); - st->sdev = spi; - - st->idev = iio_allocate_device(); - if (st->idev == NULL) { - ret = -ENOMEM; - goto error_free_st; - } - st->idev->dev.parent = &spi->dev; - st->idev->num_interrupt_lines = 0; - st->idev->event_attrs = NULL; - - st->idev->attrs = &ad9850_attribute_group; - st->idev->dev_data = (void *)(st); - st->idev->driver_module = THIS_MODULE; - st->idev->modes = INDIO_DIRECT_MODE; - - ret = iio_device_register(st->idev); - if (ret) - goto error_free_dev; - spi->max_speed_hz = 2000000; - spi->mode = SPI_MODE_3; - spi->bits_per_word = 16; - spi_setup(spi); - - return 0; - -error_free_dev: - iio_free_device(st->idev); -error_free_st: - kfree(st); -error_ret: - return ret; -} - -static int __devexit ad9850_remove(struct spi_device *spi) -{ - struct ad9850_state *st = spi_get_drvdata(spi); - - iio_device_unregister(st->idev); - kfree(st); - - return 0; -} - -static struct spi_driver ad9850_driver = { - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, - .probe = ad9850_probe, - .remove = __devexit_p(ad9850_remove), -}; - -static __init int ad9850_spi_init(void) -{ - return spi_register_driver(&ad9850_driver); -} -module_init(ad9850_spi_init); - -static __exit void ad9850_spi_exit(void) -{ - spi_unregister_driver(&ad9850_driver); -} -module_exit(ad9850_spi_exit); - -MODULE_AUTHOR("Cliff Cai"); -MODULE_DESCRIPTION("Analog Devices ad9850 driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/dds/ad9852.c b/drivers/staging/iio/dds/ad9852.c deleted file mode 100644 index 594fb6a..0000000 --- a/drivers/staging/iio/dds/ad9852.c +++ /dev/null @@ -1,305 +0,0 @@ -/* - * Driver for ADI Direct Digital Synthesis ad9852 - * - * Copyright (c) 2010 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/types.h> -#include <linux/mutex.h> -#include <linux/device.h> -#include <linux/spi/spi.h> -#include <linux/slab.h> -#include <linux/sysfs.h> - -#include "../iio.h" -#include "../sysfs.h" - -#define DRV_NAME "ad9852" - -#define addr_phaad1 0x0 -#define addr_phaad2 0x1 -#define addr_fretu1 0x2 -#define addr_fretu2 0x3 -#define addr_delfre 0x4 -#define addr_updclk 0x5 -#define addr_ramclk 0x6 -#define addr_contrl 0x7 -#define addr_optskm 0x8 -#define addr_optskr 0xa -#define addr_dacctl 0xb - -#define COMPPD (1 << 4) -#define REFMULT2 (1 << 2) -#define BYPPLL (1 << 5) -#define PLLRANG (1 << 6) -#define IEUPCLK (1) -#define OSKEN (1 << 5) - -#define read_bit (1 << 7) - -/* Register format: 1 byte addr + value */ -struct ad9852_config { - u8 phajst0[3]; - u8 phajst1[3]; - u8 fretun1[6]; - u8 fretun2[6]; - u8 dltafre[6]; - u8 updtclk[5]; - u8 ramprat[4]; - u8 control[5]; - u8 outpskm[3]; - u8 outpskr[2]; - u8 daccntl[3]; -}; - -struct ad9852_state { - struct mutex lock; - struct iio_dev *idev; - struct spi_device *sdev; -}; - -static ssize_t ad9852_set_parameter(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct spi_message msg; - struct spi_transfer xfer; - int ret; - struct ad9852_config *config = (struct ad9852_config *)buf; - struct iio_dev *idev = dev_get_drvdata(dev); - struct ad9852_state *st = idev->dev_data; - - xfer.len = 3; - xfer.tx_buf = &config->phajst0[0]; - mutex_lock(&st->lock); - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 3; - xfer.tx_buf = &config->phajst1[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 6; - xfer.tx_buf = &config->fretun1[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 6; - xfer.tx_buf = &config->fretun2[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 6; - xfer.tx_buf = &config->dltafre[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 5; - xfer.tx_buf = &config->updtclk[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 4; - xfer.tx_buf = &config->ramprat[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 5; - xfer.tx_buf = &config->control[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 3; - xfer.tx_buf = &config->outpskm[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 2; - xfer.tx_buf = &config->outpskr[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 3; - xfer.tx_buf = &config->daccntl[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : len; -} - -static IIO_DEVICE_ATTR(dds, S_IWUSR, NULL, ad9852_set_parameter, 0); - -static void ad9852_init(struct ad9852_state *st) -{ - struct spi_message msg; - struct spi_transfer xfer; - int ret; - u8 config[5]; - - config[0] = addr_contrl; - config[1] = COMPPD; - config[2] = REFMULT2 | BYPPLL | PLLRANG; - config[3] = IEUPCLK; - config[4] = OSKEN; - - mutex_lock(&st->lock); - - xfer.len = 5; - xfer.tx_buf = &config; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - -error_ret: - mutex_unlock(&st->lock); - - - -} - -static struct attribute *ad9852_attributes[] = { - &iio_dev_attr_dds.dev_attr.attr, - NULL, -}; - -static const struct attribute_group ad9852_attribute_group = { - .name = DRV_NAME, - .attrs = ad9852_attributes, -}; - -static int __devinit ad9852_probe(struct spi_device *spi) -{ - struct ad9852_state *st; - int ret = 0; - - st = kzalloc(sizeof(*st), GFP_KERNEL); - if (st == NULL) { - ret = -ENOMEM; - goto error_ret; - } - spi_set_drvdata(spi, st); - - mutex_init(&st->lock); - st->sdev = spi; - - st->idev = iio_allocate_device(); - if (st->idev == NULL) { - ret = -ENOMEM; - goto error_free_st; - } - st->idev->dev.parent = &spi->dev; - st->idev->num_interrupt_lines = 0; - st->idev->event_attrs = NULL; - - st->idev->attrs = &ad9852_attribute_group; - st->idev->dev_data = (void *)(st); - st->idev->driver_module = THIS_MODULE; - st->idev->modes = INDIO_DIRECT_MODE; - - ret = iio_device_register(st->idev); - if (ret) - goto error_free_dev; - spi->max_speed_hz = 2000000; - spi->mode = SPI_MODE_3; - spi->bits_per_word = 8; - spi_setup(spi); - ad9852_init(st); - return 0; - -error_free_dev: - iio_free_device(st->idev); -error_free_st: - kfree(st); -error_ret: - return ret; -} - -static int __devexit ad9852_remove(struct spi_device *spi) -{ - struct ad9852_state *st = spi_get_drvdata(spi); - - iio_device_unregister(st->idev); - kfree(st); - - return 0; -} - -static struct spi_driver ad9852_driver = { - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, - .probe = ad9852_probe, - .remove = __devexit_p(ad9852_remove), -}; - -static __init int ad9852_spi_init(void) -{ - return spi_register_driver(&ad9852_driver); -} -module_init(ad9852_spi_init); - -static __exit void ad9852_spi_exit(void) -{ - spi_unregister_driver(&ad9852_driver); -} -module_exit(ad9852_spi_exit); - -MODULE_AUTHOR("Cliff Cai"); -MODULE_DESCRIPTION("Analog Devices ad9852 driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/dds/ad9910.c b/drivers/staging/iio/dds/ad9910.c deleted file mode 100644 index e8fb75c..0000000 --- a/drivers/staging/iio/dds/ad9910.c +++ /dev/null @@ -1,440 +0,0 @@ -/* - * Driver for ADI Direct Digital Synthesis ad9910 - * - * Copyright (c) 2010 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/types.h> -#include <linux/mutex.h> -#include <linux/device.h> -#include <linux/spi/spi.h> -#include <linux/slab.h> -#include <linux/sysfs.h> - -#include "../iio.h" -#include "../sysfs.h" - -#define DRV_NAME "ad9910" - -#define CFR1 0x0 -#define CFR2 0x1 -#define CFR3 0x2 - -#define AUXDAC 0x3 -#define IOUPD 0x4 -#define FTW 0x7 -#define POW 0x8 -#define ASF 0x9 -#define MULTC 0x0A -#define DIG_RAMPL 0x0B -#define DIG_RAMPS 0x0C -#define DIG_RAMPR 0x0D -#define SIN_TONEP0 0x0E -#define SIN_TONEP1 0x0F -#define SIN_TONEP2 0x10 -#define SIN_TONEP3 0x11 -#define SIN_TONEP4 0x12 -#define SIN_TONEP5 0x13 -#define SIN_TONEP6 0x14 -#define SIN_TONEP7 0x15 - -#define RAM_ENABLE (1 << 7) - -#define MANUAL_OSK (1 << 7) -#define INVSIC (1 << 6) -#define DDS_SINEOP (1) - -#define AUTO_OSK (1) -#define OSKEN (1 << 1) -#define LOAD_ARR (1 << 2) -#define CLR_PHA (1 << 3) -#define CLR_DIG (1 << 4) -#define ACLR_PHA (1 << 5) -#define ACLR_DIG (1 << 6) -#define LOAD_LRR (1 << 7) - -#define LSB_FST (1) -#define SDIO_IPT (1 << 1) -#define EXT_PWD (1 << 3) -#define ADAC_PWD (1 << 4) -#define REFCLK_PWD (1 << 5) -#define DAC_PWD (1 << 6) -#define DIG_PWD (1 << 7) - -#define ENA_AMP (1) -#define READ_FTW (1) -#define DIGR_LOW (1 << 1) -#define DIGR_HIGH (1 << 2) -#define DIGR_ENA (1 << 3) -#define SYNCCLK_ENA (1 << 6) -#define ITER_IOUPD (1 << 7) - -#define TX_ENA (1 << 1) -#define PDCLK_INV (1 << 2) -#define PDCLK_ENB (1 << 3) - -#define PARA_ENA (1 << 4) -#define SYNC_DIS (1 << 5) -#define DATA_ASS (1 << 6) -#define MATCH_ENA (1 << 7) - -#define PLL_ENA (1) -#define PFD_RST (1 << 2) -#define REFCLK_RST (1 << 6) -#define REFCLK_BYP (1 << 7) - -/* Register format: 1 byte addr + value */ -struct ad9910_config { - u8 auxdac[5]; - u8 ioupd[5]; - u8 ftw[5]; - u8 pow[3]; - u8 asf[5]; - u8 multc[5]; - u8 dig_rampl[9]; - u8 dig_ramps[9]; - u8 dig_rampr[5]; - u8 sin_tonep0[9]; - u8 sin_tonep1[9]; - u8 sin_tonep2[9]; - u8 sin_tonep3[9]; - u8 sin_tonep4[9]; - u8 sin_tonep5[9]; - u8 sin_tonep6[9]; - u8 sin_tonep7[9]; -}; - -struct ad9910_state { - struct mutex lock; - struct iio_dev *idev; - struct spi_device *sdev; -}; - -static ssize_t ad9910_set_parameter(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct spi_message msg; - struct spi_transfer xfer; - int ret; - struct ad9910_config *config = (struct ad9910_config *)buf; - struct iio_dev *idev = dev_get_drvdata(dev); - struct ad9910_state *st = idev->dev_data; - - xfer.len = 5; - xfer.tx_buf = &config->auxdac[0]; - mutex_lock(&st->lock); - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 5; - xfer.tx_buf = &config->ioupd[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 5; - xfer.tx_buf = &config->ftw[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 3; - xfer.tx_buf = &config->pow[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 5; - xfer.tx_buf = &config->asf[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 5; - xfer.tx_buf = &config->multc[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 9; - xfer.tx_buf = &config->dig_rampl[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 9; - xfer.tx_buf = &config->dig_ramps[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 5; - xfer.tx_buf = &config->dig_rampr[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 9; - xfer.tx_buf = &config->sin_tonep0[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 9; - xfer.tx_buf = &config->sin_tonep1[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 9; - xfer.tx_buf = &config->sin_tonep2[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - xfer.len = 9; - xfer.tx_buf = &config->sin_tonep3[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 9; - xfer.tx_buf = &config->sin_tonep4[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 9; - xfer.tx_buf = &config->sin_tonep5[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 9; - xfer.tx_buf = &config->sin_tonep6[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 9; - xfer.tx_buf = &config->sin_tonep7[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : len; -} - -static IIO_DEVICE_ATTR(dds, S_IWUSR, NULL, ad9910_set_parameter, 0); - -static void ad9910_init(struct ad9910_state *st) -{ - struct spi_message msg; - struct spi_transfer xfer; - int ret; - u8 cfr[5]; - - cfr[0] = CFR1; - cfr[1] = 0; - cfr[2] = MANUAL_OSK | INVSIC | DDS_SINEOP; - cfr[3] = AUTO_OSK | OSKEN | ACLR_PHA | ACLR_DIG | LOAD_LRR; - cfr[4] = 0; - - mutex_lock(&st->lock); - - xfer.len = 5; - xfer.tx_buf = 𝔠 - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - cfr[0] = CFR2; - cfr[1] = ENA_AMP; - cfr[2] = READ_FTW | DIGR_ENA | ITER_IOUPD; - cfr[3] = TX_ENA | PDCLK_INV | PDCLK_ENB; - cfr[4] = PARA_ENA; - - xfer.len = 5; - xfer.tx_buf = 𝔠 - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - cfr[0] = CFR3; - cfr[1] = PLL_ENA; - cfr[2] = 0; - cfr[3] = REFCLK_RST | REFCLK_BYP; - cfr[4] = 0; - - xfer.len = 5; - xfer.tx_buf = 𝔠 - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - -error_ret: - mutex_unlock(&st->lock); - - - -} - -static struct attribute *ad9910_attributes[] = { - &iio_dev_attr_dds.dev_attr.attr, - NULL, -}; - -static const struct attribute_group ad9910_attribute_group = { - .name = DRV_NAME, - .attrs = ad9910_attributes, -}; - -static int __devinit ad9910_probe(struct spi_device *spi) -{ - struct ad9910_state *st; - int ret = 0; - - st = kzalloc(sizeof(*st), GFP_KERNEL); - if (st == NULL) { - ret = -ENOMEM; - goto error_ret; - } - spi_set_drvdata(spi, st); - - mutex_init(&st->lock); - st->sdev = spi; - - st->idev = iio_allocate_device(); - if (st->idev == NULL) { - ret = -ENOMEM; - goto error_free_st; - } - st->idev->dev.parent = &spi->dev; - st->idev->num_interrupt_lines = 0; - st->idev->event_attrs = NULL; - - st->idev->attrs = &ad9910_attribute_group; - st->idev->dev_data = (void *)(st); - st->idev->driver_module = THIS_MODULE; - st->idev->modes = INDIO_DIRECT_MODE; - - ret = iio_device_register(st->idev); - if (ret) - goto error_free_dev; - spi->max_speed_hz = 2000000; - spi->mode = SPI_MODE_3; - spi->bits_per_word = 8; - spi_setup(spi); - ad9910_init(st); - return 0; - -error_free_dev: - iio_free_device(st->idev); -error_free_st: - kfree(st); -error_ret: - return ret; -} - -static int __devexit ad9910_remove(struct spi_device *spi) -{ - struct ad9910_state *st = spi_get_drvdata(spi); - - iio_device_unregister(st->idev); - kfree(st); - - return 0; -} - -static struct spi_driver ad9910_driver = { - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, - .probe = ad9910_probe, - .remove = __devexit_p(ad9910_remove), -}; - -static __init int ad9910_spi_init(void) -{ - return spi_register_driver(&ad9910_driver); -} -module_init(ad9910_spi_init); - -static __exit void ad9910_spi_exit(void) -{ - spi_unregister_driver(&ad9910_driver); -} -module_exit(ad9910_spi_exit); - -MODULE_AUTHOR("Cliff Cai"); -MODULE_DESCRIPTION("Analog Devices ad9910 driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/dds/ad9951.c b/drivers/staging/iio/dds/ad9951.c deleted file mode 100644 index 57eddf6..0000000 --- a/drivers/staging/iio/dds/ad9951.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * Driver for ADI Direct Digital Synthesis ad9951 - * - * Copyright (c) 2010 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/types.h> -#include <linux/mutex.h> -#include <linux/device.h> -#include <linux/spi/spi.h> -#include <linux/slab.h> -#include <linux/sysfs.h> - -#include "../iio.h" -#include "../sysfs.h" - -#define DRV_NAME "ad9951" - -#define CFR1 0x0 -#define CFR2 0x1 - -#define AUTO_OSK (1) -#define OSKEN (1 << 1) -#define LOAD_ARR (1 << 2) - -#define AUTO_SYNC (1 << 7) - -#define LSB_FST (1) -#define SDIO_IPT (1 << 1) -#define CLR_PHA (1 << 2) -#define SINE_OPT (1 << 4) -#define ACLR_PHA (1 << 5) - -#define VCO_RANGE (1 << 2) - -#define CRS_OPT (1 << 1) -#define HMANU_SYNC (1 << 2) -#define HSPD_SYNC (1 << 3) - -/* Register format: 1 byte addr + value */ -struct ad9951_config { - u8 asf[3]; - u8 arr[2]; - u8 ftw0[5]; - u8 ftw1[3]; -}; - -struct ad9951_state { - struct mutex lock; - struct iio_dev *idev; - struct spi_device *sdev; -}; - -static ssize_t ad9951_set_parameter(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct spi_message msg; - struct spi_transfer xfer; - int ret; - struct ad9951_config *config = (struct ad9951_config *)buf; - struct iio_dev *idev = dev_get_drvdata(dev); - struct ad9951_state *st = idev->dev_data; - - xfer.len = 3; - xfer.tx_buf = &config->asf[0]; - mutex_lock(&st->lock); - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 2; - xfer.tx_buf = &config->arr[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 5; - xfer.tx_buf = &config->ftw0[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - xfer.len = 3; - xfer.tx_buf = &config->ftw1[0]; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; -error_ret: - mutex_unlock(&st->lock); - - return ret ? ret : len; -} - -static IIO_DEVICE_ATTR(dds, S_IWUSR, NULL, ad9951_set_parameter, 0); - -static void ad9951_init(struct ad9951_state *st) -{ - struct spi_message msg; - struct spi_transfer xfer; - int ret; - u8 cfr[5]; - - cfr[0] = CFR1; - cfr[1] = 0; - cfr[2] = LSB_FST | CLR_PHA | SINE_OPT | ACLR_PHA; - cfr[3] = AUTO_OSK | OSKEN | LOAD_ARR; - cfr[4] = 0; - - mutex_lock(&st->lock); - - xfer.len = 5; - xfer.tx_buf = 𝔠 - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - - cfr[0] = CFR2; - cfr[1] = VCO_RANGE; - cfr[2] = HSPD_SYNC; - cfr[3] = 0; - - xfer.len = 4; - xfer.tx_buf = 𝔠 - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - ret = spi_sync(st->sdev, &msg); - if (ret) - goto error_ret; - -error_ret: - mutex_unlock(&st->lock); - - - -} - -static struct attribute *ad9951_attributes[] = { - &iio_dev_attr_dds.dev_attr.attr, - NULL, -}; - -static const struct attribute_group ad9951_attribute_group = { - .name = DRV_NAME, - .attrs = ad9951_attributes, -}; - -static int __devinit ad9951_probe(struct spi_device *spi) -{ - struct ad9951_state *st; - int ret = 0; - - st = kzalloc(sizeof(*st), GFP_KERNEL); - if (st == NULL) { - ret = -ENOMEM; - goto error_ret; - } - spi_set_drvdata(spi, st); - - mutex_init(&st->lock); - st->sdev = spi; - - st->idev = iio_allocate_device(); - if (st->idev == NULL) { - ret = -ENOMEM; - goto error_free_st; - } - st->idev->dev.parent = &spi->dev; - st->idev->num_interrupt_lines = 0; - st->idev->event_attrs = NULL; - - st->idev->attrs = &ad9951_attribute_group; - st->idev->dev_data = (void *)(st); - st->idev->driver_module = THIS_MODULE; - st->idev->modes = INDIO_DIRECT_MODE; - - ret = iio_device_register(st->idev); - if (ret) - goto error_free_dev; - spi->max_speed_hz = 2000000; - spi->mode = SPI_MODE_3; - spi->bits_per_word = 8; - spi_setup(spi); - ad9951_init(st); - return 0; - -error_free_dev: - iio_free_device(st->idev); -error_free_st: - kfree(st); -error_ret: - return ret; -} - -static int __devexit ad9951_remove(struct spi_device *spi) -{ - struct ad9951_state *st = spi_get_drvdata(spi); - - iio_device_unregister(st->idev); - kfree(st); - - return 0; -} - -static struct spi_driver ad9951_driver = { - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, - .probe = ad9951_probe, - .remove = __devexit_p(ad9951_remove), -}; - -static __init int ad9951_spi_init(void) -{ - return spi_register_driver(&ad9951_driver); -} -module_init(ad9951_spi_init); - -static __exit void ad9951_spi_exit(void) -{ - spi_unregister_driver(&ad9951_driver); -} -module_exit(ad9951_spi_exit); - -MODULE_AUTHOR("Cliff Cai"); -MODULE_DESCRIPTION("Analog Devices ad9951 driver"); -MODULE_LICENSE("GPL v2"); -- 1.6.0.2 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html