Removed stubs related to buffering and triggering. Put them back when they are actually needed. Fixed line length issues. Made a number of functions static as no longer in header. Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxx> --- drivers/staging/iio/gyro/adis16060.h | 70 ----------------------------- drivers/staging/iio/gyro/adis16060_core.c | 59 +++++------------------- 2 files changed, 13 insertions(+), 116 deletions(-) diff --git a/drivers/staging/iio/gyro/adis16060.h b/drivers/staging/iio/gyro/adis16060.h index 5c00e53..e85121b 100644 --- a/drivers/staging/iio/gyro/adis16060.h +++ b/drivers/staging/iio/gyro/adis16060.h @@ -14,11 +14,7 @@ /** * struct adis16060_state - device instance specific data * @us_w: actual spi_device to write data - * @work_trigger_to_ring: bh for triggered event handling - * @inter: used to check if new interrupt has been triggered - * @last_timestamp: passing timestamp from th to bh of interrupt handler * @indio_dev: industrial I/O device structure - * @trig: data ready trigger registered with iio * @tx: transmit buffer * @rx: recieve buffer * @buf_lock: mutex to protect tx and rx @@ -26,76 +22,10 @@ struct adis16060_state { struct spi_device *us_w; struct spi_device *us_r; - struct work_struct work_trigger_to_ring; - s64 last_timestamp; struct iio_dev *indio_dev; - struct iio_trigger *trig; u8 *tx; u8 *rx; struct mutex buf_lock; }; -#if defined(CONFIG_IIO_RING_BUFFER) && defined(THIS_HAS_RING_BUFFER_SUPPORT) -/* At the moment triggers are only used for ring buffer - * filling. This may change! - */ - -enum adis16060_scan { - ADIS16060_SCAN_GYRO, - ADIS16060_SCAN_TEMP, - ADIS16060_SCAN_ADC_1, - ADIS16060_SCAN_ADC_2, -}; - -void adis16060_remove_trigger(struct iio_dev *indio_dev); -int adis16060_probe_trigger(struct iio_dev *indio_dev); - -ssize_t adis16060_read_data_from_ring(struct device *dev, - struct device_attribute *attr, - char *buf); - - -int adis16060_configure_ring(struct iio_dev *indio_dev); -void adis16060_unconfigure_ring(struct iio_dev *indio_dev); - -int adis16060_initialize_ring(struct iio_ring_buffer *ring); -void adis16060_uninitialize_ring(struct iio_ring_buffer *ring); -#else /* CONFIG_IIO_RING_BUFFER */ - -static inline void adis16060_remove_trigger(struct iio_dev *indio_dev) -{ -} - -static inline int adis16060_probe_trigger(struct iio_dev *indio_dev) -{ - return 0; -} - -static inline ssize_t -adis16060_read_data_from_ring(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - return 0; -} - -static int adis16060_configure_ring(struct iio_dev *indio_dev) -{ - return 0; -} - -static inline void adis16060_unconfigure_ring(struct iio_dev *indio_dev) -{ -} - -static inline int adis16060_initialize_ring(struct iio_ring_buffer *ring) -{ - return 0; -} - -static inline void adis16060_uninitialize_ring(struct iio_ring_buffer *ring) -{ -} - -#endif /* CONFIG_IIO_RING_BUFFER */ #endif /* SPI_ADIS16060_H_ */ diff --git a/drivers/staging/iio/gyro/adis16060_core.c b/drivers/staging/iio/gyro/adis16060_core.c index fc48aca..11f51f2 100644 --- a/drivers/staging/iio/gyro/adis16060_core.c +++ b/drivers/staging/iio/gyro/adis16060_core.c @@ -25,11 +25,9 @@ #include "adis16060.h" -#define DRIVER_NAME "adis16060" +static struct adis16060_state *adis16060_st; -struct adis16060_state *adis16060_st; - -int adis16060_spi_write(struct device *dev, +static int adis16060_spi_write(struct device *dev, u8 val) { int ret; @@ -47,7 +45,7 @@ int adis16060_spi_write(struct device *dev, return ret; } -int adis16060_spi_read(struct device *dev, +static int adis16060_spi_read(struct device *dev, u16 *val) { int ret; @@ -58,12 +56,15 @@ int adis16060_spi_read(struct device *dev, ret = spi_read(st->us_r, st->rx, 3); - /* The internal successive approximation ADC begins the conversion process - * on the falling edge of MSEL1 and starts to place data MSB first on the - * DOUT line at the 6th falling edge of SCLK + /* The internal successive approximation ADC begins the + * conversion process on the falling edge of MSEL1 and + * starts to place data MSB first on the DOUT line at + * the 6th falling edge of SCLK */ if (ret == 0) - *val = ((st->rx[0] & 0x3) << 12) | (st->rx[1] << 4) | ((st->rx[2] >> 4) & 0xF); + *val = ((st->rx[0] & 0x3) << 12) | + (st->rx[1] << 4) | + ((st->rx[2] >> 4) & 0xF); mutex_unlock(&st->buf_lock); return ret; @@ -74,7 +75,7 @@ static ssize_t adis16060_read(struct device *dev, char *buf) { struct iio_dev *indio_dev = dev_get_drvdata(dev); - u16 val; + u16 val = 0; ssize_t ret; /* Take the iio_dev status lock */ @@ -174,45 +175,14 @@ static int __devinit adis16060_r_probe(struct spi_device *spi) st->indio_dev->driver_module = THIS_MODULE; st->indio_dev->modes = INDIO_DIRECT_MODE; - ret = adis16060_configure_ring(st->indio_dev); - if (ret) - goto error_free_dev; - ret = iio_device_register(st->indio_dev); if (ret) - goto error_unreg_ring_funcs; + goto error_free_dev; regdone = 1; - ret = adis16060_initialize_ring(st->indio_dev->ring); - if (ret) { - printk(KERN_ERR "failed to initialize the ring\n"); - goto error_unreg_ring_funcs; - } - - if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) { - ret = iio_register_interrupt_line(spi->irq, - st->indio_dev, - 0, - IRQF_TRIGGER_RISING, - "adis16060"); - if (ret) - goto error_uninitialize_ring; - - ret = adis16060_probe_trigger(st->indio_dev); - if (ret) - goto error_unregister_line; - } - adis16060_st = st; return 0; -error_unregister_line: - if (st->indio_dev->modes & INDIO_RING_TRIGGERED) - iio_unregister_interrupt_line(st->indio_dev, 0); -error_uninitialize_ring: - adis16060_uninitialize_ring(st->indio_dev->ring); -error_unreg_ring_funcs: - adis16060_unconfigure_ring(st->indio_dev); error_free_dev: if (regdone) iio_device_unregister(st->indio_dev); @@ -236,12 +206,9 @@ static int adis16060_r_remove(struct spi_device *spi) flush_scheduled_work(); - adis16060_remove_trigger(indio_dev); if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) iio_unregister_interrupt_line(indio_dev, 0); - adis16060_uninitialize_ring(indio_dev->ring); - adis16060_unconfigure_ring(indio_dev); iio_device_unregister(indio_dev); kfree(st->tx); kfree(st->rx); @@ -315,5 +282,5 @@ static __exit void adis16060_exit(void) module_exit(adis16060_exit); MODULE_AUTHOR("Barry Song <21cnbao@xxxxxxxxx>"); -MODULE_DESCRIPTION("Analog Devices ADIS16060 Yaw Rate Gyroscope with SPI driver"); +MODULE_DESCRIPTION("Analog Devices ADIS16060 Yaw Rate Gyroscope Driver"); MODULE_LICENSE("GPL v2"); -- 1.7.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html