Michel, Just a thought not a comment. However I think error handling could be dealt later. > -----Original Message----- > From: Hennerich, Michael [mailto:Michael.Hennerich@xxxxxxxxxx] > Sent: Friday, December 03, 2010 4:13 PM > To: Datta, Shubhrajyoti; linux-iio@xxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx > Cc: Drivers; jic23@xxxxxxxxx; device-drivers-devel@xxxxxxxxxxxxxxxxxxxx > Subject: RE: [RFC 3/3] IIO: DDS: AD9833 / AD9834 driver > > > Datta, Shubhrajyoti wrote on 2010-12-02: > > > -----Original Message----- > > > From: linux-iio-owner@xxxxxxxxxxxxxxx [mailto:linux-iio- > > > owner@xxxxxxxxxxxxxxx] On Behalf Of michael.hennerich@xxxxxxxxxx > > > Sent: Thursday, December 02, 2010 5:51 PM > > > To: linux-iio@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx > > > Cc: drivers@xxxxxxxxxx; jic23@xxxxxxxxx; device-drivers- > > > devel@xxxxxxxxxxxxxxxxxxxx; Michael Hennerich > > > Subject: [RFC 3/3] IIO: DDS: AD9833 / AD9834 driver > > > > > > From: Michael Hennerich <michael.hennerich@xxxxxxxxxx> > > > > > > Example driver using the proposed ABI > > > > > > Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx> > > > --- > > > drivers/staging/iio/dds/Kconfig | 7 + > > > drivers/staging/iio/dds/Makefile | 1 + > > > drivers/staging/iio/dds/ad9834.c | 483 > > > ++++++++++++++++++++++++++++++++++++++ > > > drivers/staging/iio/dds/ad9834.h | 112 +++++++++ > > > 4 files changed, 603 insertions(+), 0 deletions(-) > > > create mode 100644 drivers/staging/iio/dds/ad9834.c > > > create mode 100644 drivers/staging/iio/dds/ad9834.h > > > > > > diff --git a/drivers/staging/iio/dds/Kconfig > > > b/drivers/staging/iio/dds/Kconfig > > > index 7969be2..4c9cce3 100644 > > > --- a/drivers/staging/iio/dds/Kconfig > > > +++ b/drivers/staging/iio/dds/Kconfig > > > @@ -17,6 +17,13 @@ config AD9832 > > > Say yes here to build support for Analog Devices DDS chip > > > ad9832 and ad9835, provides direct access via sysfs. > > > > > > +config AD9834 > > > + tristate "Analog Devices ad9833/4/ driver" > > > + depends on SPI > > > + help > > > + Say yes here to build support for Analog Devices DDS chip > > > + AD9833 and AD9834, provides direct access via sysfs. > > > + > > > config AD9850 > > > tristate "Analog Devices ad9850/1 driver" > > > depends on SPI > > > diff --git a/drivers/staging/iio/dds/Makefile > > > b/drivers/staging/iio/dds/Makefile > > > index 6f274ac..1477461 100644 > > > --- a/drivers/staging/iio/dds/Makefile > > > +++ b/drivers/staging/iio/dds/Makefile > > > @@ -4,6 +4,7 @@ > > > > > > obj-$(CONFIG_AD5930) += ad5930.o > > > obj-$(CONFIG_AD9832) += ad9832.o > > > +obj-$(CONFIG_AD9834) += ad9834.o > > > obj-$(CONFIG_AD9850) += ad9850.o > > > obj-$(CONFIG_AD9852) += ad9852.o > > > obj-$(CONFIG_AD9910) += ad9910.o > > > diff --git a/drivers/staging/iio/dds/ad9834.c > > > b/drivers/staging/iio/dds/ad9834.c > > > new file mode 100644 > > > index 0000000..eb1fabf > > > --- /dev/null > > > +++ b/drivers/staging/iio/dds/ad9834.c > > > @@ -0,0 +1,483 @@ > > > +/* > > > + * AD9834 SPI DAC driver > > > + * > > > + * Copyright 2010 Analog Devices Inc. > > > + * > > > + * Licensed under the GPL-2 or later. > > > + */ > > > + > > > +#include <linux/interrupt.h> > > > +#include <linux/workqueue.h> > > > +#include <linux/device.h> > > > +#include <linux/kernel.h> > > > +#include <linux/slab.h> > > > +#include <linux/sysfs.h> > > > +#include <linux/list.h> > > > +#include <linux/spi/spi.h> > > > +#include <linux/regulator/consumer.h> > > > +#include <linux/err.h> > > > +#include <asm/div64.h> > > > + > > > +#include "../iio.h" > > > +#include "../sysfs.h" > > > +#include "dds.h" > > > + > > > +#include "ad9834.h" > > > + > > > +static unsigned int ad9834_calc_freqreg(unsigned long mclk, unsigned > > long > > > fout) > > > +{ > > > + unsigned long long freqreg = (u64) fout * (u64) (1 << > > > AD9834_FREQ_BITS); > > > + do_div(freqreg, mclk); > > > + return freqreg; > > > +} > > > + > > > +static int ad9834_write_frequency(struct ad9834_state *st, > > > + unsigned long addr, unsigned long > > fout) > > > +{ > > > + unsigned long regval; > > > + > > > + if (fout > (st->mclk / 2)) > > > + return -EINVAL; > > > + > > > + regval = ad9834_calc_freqreg(st->mclk, fout); > > > + > > > + st->freq_data[0] = cpu_to_be16(addr | (regval & > > > + RES_MASK(AD9834_FREQ_BITS / > > 2))); > > > + st->freq_data[1] = cpu_to_be16(addr | ((regval >> > > > + (AD9834_FREQ_BITS / 2)) & > > > + RES_MASK(AD9834_FREQ_BITS / > > 2))); > > > + > > > + return spi_sync(st->spi, &st->freq_msg);; > > > +} > > > + > > > +static int ad9834_write_phase(struct ad9834_state *st, > > > + unsigned long addr, unsigned long > > phase) > > > +{ > > > + if (phase > (1 << AD9834_PHASE_BITS)) > > > + return -EINVAL; > > > + st->data = cpu_to_be16(addr | phase); > > > + > > > + return spi_sync(st->spi, &st->msg); > > > +} > > > + > > > +static ssize_t ad9834_write(struct device *dev, > > > + struct device_attribute *attr, > > > + const char *buf, > > > + size_t len) > > > +{ > > > + struct iio_dev *dev_info = dev_get_drvdata(dev); > > > + struct ad9834_state *st = dev_info->dev_data; > > > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); > > > + int ret; > > > + long val; > > > + > > > + ret = strict_strtol(buf, 10, &val); > > > + if (ret) > > > + goto error_ret; > > Could we do some bounds check. > The functions called with val as argument from the switch cases below, do > some bound checking, where necessary. > It's questionable whether these simple enable switch cases, should return > with > error if someone writes something other than 0 or 1. In that case we could we at least consider ret = strict_strtoul(buf, 10, &val); > > > + > > > + mutex_lock(&dev_info->mlock); > > > + switch (this_attr->address) { > > > + case AD9834_REG_FREQ0: > > > + case AD9834_REG_FREQ1: > > > + ret = ad9834_write_frequency(st, this_attr->address, > > val); > > > + break; > > > + case AD9834_REG_PHASE0: > > > + case AD9834_REG_PHASE1: > > > + ret = ad9834_write_phase(st, this_attr->address, val); > > > + break; > > > + > > > + case AD9834_OPBITEN: > > > + if (st->control & AD9834_MODE) { > > > + ret = -EINVAL; /* AD9843 reserved mode */ > > > + break; > > > + } > > > + > > > + if (val) > > > + st->control &= ~AD9834_OPBITEN; > > > + else > > > + st->control |= AD9834_OPBITEN; Here you check for something other than 0 if the user passes -1 then it may go through. -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html