From: Michael Hennerich <michael.hennerich@xxxxxxxxxx> Attributes considered as common between various DDS devices Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx> --- drivers/staging/iio/dds/dds.h | 153 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 153 insertions(+), 0 deletions(-) create mode 100644 drivers/staging/iio/dds/dds.h diff --git a/drivers/staging/iio/dds/dds.h b/drivers/staging/iio/dds/dds.h new file mode 100644 index 0000000..e171b33 --- /dev/null +++ b/drivers/staging/iio/dds/dds.h @@ -0,0 +1,153 @@ +/* + * dds.h - sysfs attributes associated with DDS devices + * + * Copyright (c) 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +/** + * /sys/bus/iio/devices/deviceX/ddsX_freqY + * Description: + * Stores frequency into tuning word register Y. + * There can be more than one ddsX_freqY file, which allows for pin controlled + * FSK Frequency Shift Keying (ddsX_pincontrol_freq_en is active) or the user + * can control the desired active tuning word by writing Y to the + * ddsX_freqsymbol file. + */ + +#define IIO_DEV_ATTR_FREQ(_device, _num, _store, _addr) \ + IIO_DEVICE_ATTR(dds##_device##_freq##_num, S_IWUSR, NULL, _store, _addr) + +/** + * /sys/bus/iio/devices/deviceX/ddsX_freq_scaleY + * Description: + * Scale to be applied to ddsX_freqY in order to obtain the + * desired value in Hz. If shared across all frequency registers + * Y is not present. + */ + +#define IIO_CONST_ATTR_FREQ_SCALE(_device, _string) \ + IIO_CONST_ATTR(dds##_device##_freq_scale, _string) + +/** + * /sys/bus/iio/devices/deviceX/ddsX_freqsymbol + * Description: + * Specifies the active output frequency tuning word. The value corresponds + * to the Y in ddsX_freqY. To exit this mode the user can write + * ddsX_pincontrol_freq_en or ddsX_out_disable file. + */ + +#define IIO_DEV_ATTR_FREQSYMBOL(_device, _store, _addr) \ + IIO_DEVICE_ATTR(dds##_device##_freqsymbol, \ + S_IWUSR, NULL, _store, _addr); + +/** + * /sys/bus/iio/devices/deviceX/ddsX_phaseY + * Description: + * Stores phase into phase register Y. + * There can be more than one ddsX_phaseY file, which allows for pin controlled + * PSK Phase Shift Keying (ddsX_pincontrol_phase_en is active) or the user can + * control the desired phase Y which is added to the phase accumulator output + * by writing Y to the en_phase file. + */ + +#define IIO_DEV_ATTR_PHASE(_device, _num, _store, _addr) \ + IIO_DEVICE_ATTR(dds##_device##_phase##_num, \ + S_IWUSR, NULL, _store, _addr) + +/** + * /sys/bus/iio/devices/deviceX/ddsX_phase_scaleY + * Description: + * Scale to be applied to ddsX_phaseY in order to obtain the + * desired value in rad. If shared across all phase registers + * Y is not present. + */ + +#define IIO_CONST_ATTR_PHASE_SCALE(_device, _string) \ + IIO_CONST_ATTR(dds##_device##_phase_scale, _string) + +/** + * /sys/bus/iio/devices/deviceX/ddsX_phasesymbol + * Description: + * Specifies the active phase Y which is added to the phase accumulator output. + * The value corresponds to the Y in ddsX_phaseY. To exit this mode the user + * can write ddsX_pincontrol_phase_en or disable file. + */ + +#define IIO_DEV_ATTR_PHASESYMBOL(_device, _store, _addr) \ + IIO_DEVICE_ATTR(dds##_device##_phasesymbol, \ + S_IWUSR, NULL, _store, _addr); + +/** + * /sys/bus/iio/devices/deviceX/ddsX_pincontrol_en + * Description: + * Both, the active frequency and phase is controlled by the respective + * phase and frequency control inputs. + */ + +#define IIO_DEV_ATTR_PINCONTROL_EN(_device, _store, _addr) \ + IIO_DEVICE_ATTR(dds##_device##_pincontrol_en, \ + S_IWUSR, NULL, _store, _addr); + +/** + * /sys/bus/iio/devices/deviceX/ddsX_pincontrol_freq_en + * Description: + * The active frequency is controlled by the respective + * frequency control/select inputs. + */ + +#define IIO_DEV_ATTR_PINCONTROL_FREQ_EN(_device, _store, _addr) \ + IIO_DEVICE_ATTR(dds##_device##_pincontrol_freq_en, \ + S_IWUSR, NULL, _store, _addr); + +/** + * /sys/bus/iio/devices/deviceX/ddsX_pincontrol_phase_en + * Description: + * The active phase is controlled by the respective + * phase control/select inputs. + */ + +#define IIO_DEV_ATTR_PINCONTROL_PHASE_EN(_device, _store, _addr) \ + IIO_DEVICE_ATTR(dds##_device##_pincontrol_phase_en, \ + S_IWUSR, NULL, _store, _addr); + +/** + * /sys/bus/iio/devices/deviceX/ddsX_out_disable + * Description: + * Disables any signal generation on all outputs. + */ + +#define IIO_DEV_ATTR_OUT_DISABLE(_device, _store, _addr) \ + IIO_DEVICE_ATTR(dds##_device##_out_disable, \ + S_IWUSR, NULL, _store, _addr); + + +/** + * /sys/bus/iio/devices/deviceX/ddsX_outY_disable + * Description: + * Disables any signal generation on output Y. + */ + +#define IIO_DEV_ATTR_OUTY_DISABLE(_device, _output, _store, _addr) \ + IIO_DEVICE_ATTR(dds##_device##_out##_output##_disable, \ + S_IWUSR, NULL, _store, _addr); + +/** + * /sys/bus/iio/devices/deviceX/ddsX_outY_wavetype + * Description: + * Specifies the output waveform. (sine, triangle, ramp, square, ...) + * For a list of available output waveform options read available_output_modes. + */ +#define IIO_DEV_ATTR_OUT_WAVETYPE(_device, _output, _store, _addr) \ + IIO_DEVICE_ATTR(dds##_device##_out##_output##_wavetype, \ + S_IWUSR, NULL, _store, _addr); + +/** + * /sys/bus/iio/devices/deviceX/ddsX_outY_available_wavetypes + * Description: + * Lists all available output waveform options. + */ +#define IIO_CONST_ATTR_OUT_AVAILABLE_WAVETYPES(_device, _output, _modes)\ + IIO_CONST_ATTR(dds##_device##_out##_output##_available_wavetypes,\ + _modes); -- 1.6.0.2 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html