Re: [ata] 0568e61225: stress-ng.copy-file.ops_per_sec -15.0% regression

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16/08/2022 21:02, Damien Le Moal wrote:
ou confirm this? Thanks!

On this basis, it appears that max_hw_sectors_kb is getting capped from
scsi default @ 1024 sectors by commit 0568e61225. If it were getting
capped by swiotlb mapping limit then that would give us 512 sectors -
this value is fixed.

So for my SHT change proposal I am just trying to revert to previous
behaviour in 5.19 - make max_hw_sectors_kb crazy big again.
I reread the entire thing and I think I got things reverted here. The perf
regression happens with the 512/512 settings, while the original 1280/32767
before your patches was OK.

Right, that's as I read it. It would be useful for Oliver to confirm the results.

So is your patch defining the optimal mapping size
cause the reduction to 512/512.

The optimal mapping size only affects specifically sas controllers, so I think that we can ignore that one for now. The reduction to 512/512 comes from the change in ata_scsi_dev_config().

It would mean that for ATA, we need a sane
default mapping instead of SCSI default 1024 sectors.

Right

Now I understand your
proposed change using ATA_MAX_SECTORS_LBA48.

However, that would be correct only for LBA48 capable drives.
ata_dev_configure() already sets dev->max_sectors correctly according to the
drive type, capabilities and eventual quirks. So the problem comes from the
libata-scsi change:

dev->max_sectors = min(dev->max_sectors, sdev->host->max_sectors);

when sdev->host->max_sectors is 0 (not initialized).

That cannot happen. If sht->max_sectors is 0, then we set shost->max_sectors at SCSI default 1024 sectors in scsi_host_alloc()

For my proposed change, dev->max_sectors would still be initialized in ata_dev_configure() according to drive type, etc. And it should be <= LBA48 max sectors (=65535).

So then in ata_scsi_dev_config():

dev->max_sectors = min(dev->max_sectors, sdev->host->max_sectors)

this only has an impact for ahci controllers if sdev->host->max_sectors was capped according to host dma dev max mapping size.

I will admit that this is not ideal. An alt approach is to change ata_scsi_dev_config() to cap the dev max_sectors only according to shost dma dev mapping limit (similar to scsi_add_host_with_dma()), but that would not work for a controller like ipr, which does have a geniune max_sectors limit (which we should respect).

Thanks,
John


So maybe simply changing
this line to:

dev->max_sectors = min_not_zero(dev->max_sectors, sdev->host->max_sectors);

would do the trick ? Any particular adapter driver that needs a mapping cap on
the adpter max mapping size can still set sdev->host->max_sectors as needed, and
we keep the same defaults as before when it is not set. Thoughts ? Or am I
missing something else ?


The regression may come not from commands becoming tiny, but from the fact that
after the patch, max_sectors_kb is too large,
I don't think it is, but need confirmation.

causing a lot of overhead with
qemu swiotlb mapping and slowing down IO processing.
Above, it can be seen that we ed up with max_sectors_kb being 1280, which is the
default for most scsi disks (including ATA drives). That is normal. But before
that, it was 512, which likely better fits qemu swiotlb and does not generate
Again, I don't think this this is the case. Need confirmation.

overhead. So the above fix will not change anything I think...




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux