Re: [PATCH v3 18/23] dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 12, 2022 at 02:18:05AM +0300, Serge Semin wrote:
> Synopsys AHCI SATA controller is mainly compatible with the generic AHCI
> SATA controller except a few peculiarities and the platform environment
> requirements. In particular it can have one or two reference clocks to
> feed up its AXI/AHB interface and SATA PHYs domain and at least one reset
> control for the application clock domain. In addition to that the DMA
> interface of each port can be tuned up to work with the predefined maximum
> data chunk size. Note unlike generic AHCI controller DWC AHCI can't have
> more than 8 ports. All of that is reflected in the new DWC AHCI SATA
> device DT binding.
> 
> Note the DWC AHCI SATA controller DT-schema has been created in a way so
> to be reused for the vendor-specific DT-schemas (see for example the
> "snps,dwc-ahci" compatible string binding). One of which we are about to
> introduce.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
> 
> ---
> 
> Changelog v2:
> - Replace min/max constraints of the snps,{tx,rx}-ts-max property with
>   enum [ 1, 2, 4, ..., 1024 ]. (@Rob)
> ---
>  .../bindings/ata/ahci-platform.yaml           |   8 --
>  .../bindings/ata/snps,dwc-ahci.yaml           | 123 ++++++++++++++++++
>  2 files changed, 123 insertions(+), 8 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
> 
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
> index 6cad7e86f3bb..4b65966ec23b 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
> @@ -30,8 +30,6 @@ select:
>            - marvell,armada-3700-ahci
>            - marvell,armada-8k-ahci
>            - marvell,berlin2q-ahci
> -          - snps,dwc-ahci
> -          - snps,spear-ahci
>    required:
>      - compatible
>  
> @@ -48,17 +46,11 @@ properties:
>                - marvell,berlin2-ahci
>                - marvell,berlin2q-ahci
>            - const: generic-ahci
> -      - items:
> -          - enum:
> -              - rockchip,rk3568-dwc-ahci
> -          - const: snps,dwc-ahci
>        - enum:
>            - cavium,octeon-7130-ahci
>            - hisilicon,hisi-ahci
>            - ibm,476gtr-ahci
>            - marvell,armada-3700-ahci
> -          - snps,dwc-ahci
> -          - snps,spear-ahci
>  
>    reg:
>      minItems: 1
> diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
> new file mode 100644
> index 000000000000..a13fd77a451f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/ata/snps,dwc-ahci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DWC AHCI SATA controller
> +
> +maintainers:
> +  - Serge Semin <fancer.lancer@xxxxxxxxx>
> +
> +description:
> +  This document defines device tree bindings for the Synopsys DWC
> +  implementation of the AHCI SATA controller.
> +
> +allOf:
> +  - $ref: ahci-common.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - description: Synopsys AHCI SATA-compatible devices
> +        contains:
> +          const: snps,dwc-ahci
> +      - description: SPEAr1340 AHCI SATA device
> +        const: snps,spear-ahci
> +      - description: Rockhip RK3568 ahci controller
> +        const: rockchip,rk3568-dwc-ahci
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    description:
> +      Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock
> +      and embedded PHYs reference clock together with vendor-specific set
> +      of clocks.
> +    minItems: 1
> +    maxItems: 4
> +
> +  clock-names:
> +    contains:
> +      anyOf:
> +        - description: Application AXI/AHB BIU clock source
> +          enum:
> +            - aclk
> +            - sata
> +        - description: SATA Ports reference clock
> +          enum:
> +            - ref
> +            - sata_ref
> +
> +  resets:
> +    description:
> +      At least basic core and application clock domains reset is normally
> +      supported by the DWC AHCI SATA controller. Some platform specific
> +      clocks can be also specified though.
> +
> +  reset-names:
> +    contains:
> +      description: Core and application clock domains reset control
> +      const: arst
> +
> +patternProperties:
> +  "^sata-port@[0-9a-e]$":
> +    type: object
> +
> +    properties:
> +      reg:
> +        minimum: 0
> +        maximum: 7
> +
> +      snps,tx-ts-max:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: Maximal size of Tx DMA transactions in FIFO words
> +        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
> +
> +      snps,rx-ts-max:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: Maximal size of Rx DMA transactions in FIFO words
> +        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
> +
> +      additionalProperties: true

You just defined a DT property called 'additionalProperties'. For this 
reason, I prefer placing additionalProperties above 'properties'.

As mentioned the way 'sata-port' schemas are done here doesn't work.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    sata@122f0000 {
> +      compatible = "snps,dwc-ahci";
> +      reg = <0x122F0000 0x1ff>;
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +
> +      clocks = <&clock1>, <&clock2>;
> +      clock-names = "aclk", "ref";
> +
> +      phys = <&sata_phy>;
> +      phy-names = "sata-phy";
> +
> +      ports-implemented = <0x1>;
> +
> +      sata-port@0 {
> +        reg = <0>;
> +
> +        hba-fbscp;
> +        snps,tx-ts-max = <512>;
> +        snps,rx-ts-max = <512>;
> +      };
> +    };
> +...
> -- 
> 2.35.1
> 
> 



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux