From: Sven Auhagen <sven.auhagen@xxxxxxxxxxxx> Hello, there were already 4 versions of this series from Miquèl. I talked to Miquèl and I fixed up the last comments from v4. I am looking for feedback if this patch series is now ready to be merged and what should be further changed. Here is the original cover letter: Some time ago, when the initial support for Armada CP110 was contributed, the SATA core was not able to handle per-port interrupts. Despite the hardware reality, the device tree only represents one main interrupt for the two ports. Having both SATA ports enabled at the same time has been achieved by a hack in the ICU driver(1) that faked the use of the two interrupts, no matter which SATA port was in use. Now that the SATA core is ready to handle more than one interrupt, this series adds support for it in the libahci_platform code. The CP110 device tree must be updated to reflect the two SATA ports available and their respective interrupts. To do not break DT backward compatibility, the ahci_platform driver now embeds a special quirk which checks if the DT is valid (only for A8k compatible) and, if needed, creates the two missing sub-nodes, and assign them the relevant "reg" and "interrupts" properties, before removing the main SATA node "interrupts" one. (1) The ICU is an irqchip aggregating the CP110 (south-bridge) interrupts into MSIs for the AP806 (north-bridge). Best Sven Changes in v5 ============= * Rebase on top of v5.8-rc3 * Move code to ahci mvebu and use custom functions Changes in v4 ============= * Rebase on top of v5.2-rc1 * s/ARM64/arm64/ in the DT change commit title. Changes in v3 ============= * Removed useless locking when acking the SATA host IRQ_STAT bit. * As spotted by Hans, do not enable the AHCI_HFLAG_MULTI_MSI flag only if more than one port is enabled, DTs might declare only one interrupt and have multiple ports. Added Hans' Reviewed-by tag. * Added Rob's Reviewed-by tags. * Added explicit references to the 'Device Tree' being the culprit for the hacks which are being treated in patch "ata: ahci: mvebu: Add support for A8k legacy bindings" as suggested by Marc. * Modified all DTs to avoid enabling/disabling the SATA ports independently, which does not work. Either both ports are enabled, or none. Tested on MacchiatoBin that all three availabe ports on the board are functional. Changes in v2 ============= * In the AHCI world, the 'irq' is now an '*irqs' array, I ensured it is allocated even when not using *_platform drivers. * Moved the whole logic from the generic ahci_platform.c driver to the Marvell's ahci_mvebu.c driver. * Dropped the whole DT manipulation quirk. * Instead used a hack to configure both interrupts when using the deprecated bindings, this hack is a8k specific but there is a flag that is passed to the core during the ahci_platform_get_resources() to indicate that the number of ports must be forced to 2 no matter the number of child nodes. * The A8k based Clearfog-GT actually uses the SATA IP (Baruch's info) so do not remove the SATA node from the DT. Instead, change the DTS to fit the new bindings (the board only uses the second port at offset 1). * Added bindings documentation about the A8k AHCI compatible (existing in DTs, missing in the doc). * SATA Sub-nodes representing ports already are documented, I just added a mention that they can also have an interrupts property which is mutually exclusive with the root SATA node. Miquel Raynal (5): ata: ahci: mvebu: Rename a platform data flag ata: ahci: mvebu: Support A8k compatible irqchip/irq-mvebu-icu: Remove the double SATA ports interrupt hack dt-bindings: ata: Update ahci bindings with possible per-port interrupts dt-bindings: ata: Update ahci_mvebu bindings Sven Auhagen (2): ata: ahci: mvebu: Add support for A8k legacy DT bindings arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts .../devicetree/bindings/ata/ahci-platform.txt | 7 + arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 6 +- drivers/ata/ahci.h | 3 + drivers/ata/ahci_mvebu.c | 254 +++++++++++++++++- drivers/ata/libahci.c | 3 +- drivers/ata/libahci_platform.c | 3 + drivers/irqchip/irq-mvebu-icu.c | 18 -- include/linux/ahci_platform.h | 1 + 8 files changed, 265 insertions(+), 30 deletions(-) -- 2.24.3 (Apple Git-128)