Re: [PATCH 17/24] sata_mv: replace DPRINTK with 'pci_dump' module parameter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/13/18 11:47 AM, Hannes Reinecke wrote:
> Implement module parameter 'pci_dump' and move the DPRINTK calls
> over to dev_printk().

Please preserve __func__ printing in the conversion.

> Signed-off-by: Hannes Reinecke <hare@xxxxxxxx>
> ---
>  drivers/ata/sata_mv.c | 71 +++++++++++++++++++++++++++------------------------
>  1 file changed, 38 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
> index 73ba8e134ca9..2ede635e4023 100644
> --- a/drivers/ata/sata_mv.c
> +++ b/drivers/ata/sata_mv.c
> @@ -96,6 +96,10 @@ module_param(irq_coalescing_usecs, int, S_IRUGO);
>  MODULE_PARM_DESC(irq_coalescing_usecs,
>  		 "IRQ coalescing time threshold in usecs");
>  
> +static int pci_dump;
> +module_param(pci_dump, int, S_IRUGO);
> +MODULE_PARM_DESC(pci_dump, "Enable dumping of PCI registers on error");
> +
>  enum {
>  	/* BAR's are enumerated in terms of pci_resource_start() terms */
>  	MV_PRIMARY_BAR		= 0,	/* offset 0x10: memory space */
> @@ -1258,47 +1262,49 @@ static int mv_stop_edma(struct ata_port *ap)
>  	return err;
>  }
>  
> -#ifdef ATA_DEBUG
> -static void mv_dump_mem(void __iomem *start, unsigned bytes)
> +static void mv_dump_mem(struct device *dev, void __iomem *start, unsigned bytes)
>  {
> -	int b, w;
> +	int b, w, o;
> +	unsigned char linebuf[38];
> +
>  	for (b = 0; b < bytes; ) {
> -		DPRINTK("%p: ", start + b);
> -		for (w = 0; b < bytes && w < 4; w++) {
> -			printk("%08x ", readl(start + b));
> +		for (w = 0, o = 0; b < bytes && w < 4; w++) {
> +			o += snprintf(linebuf + o, 38 - o,
> +				      "%08x ", readl(start + b));
>  			b += sizeof(u32);
>  		}
> -		printk("\n");
> +		dev_printk(KERN_DEBUG, dev, "%p: %s\n", start + b, linebuf);
>  	}
>  }
> -#endif
> -#if defined(ATA_DEBUG) || defined(CONFIG_PCI)
> +#if defined(CONFIG_PCI)
>  static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes)
>  {
> -#ifdef ATA_DEBUG
> -	int b, w;
> +	int b, w, o;
>  	u32 dw;
> +	unsigned char linebuf[38];
> +
>  	for (b = 0; b < bytes; ) {
> -		DPRINTK("%02x: ", b);
> -		for (w = 0; b < bytes && w < 4; w++) {
> +		for (w = 0, o = 0; b < bytes && w < 4; w++) {
>  			(void) pci_read_config_dword(pdev, b, &dw);
> -			printk("%08x ", dw);
> +			o += snprintf(linebuf + o, 38 - o,
> +				      "%08x ", dw);
>  			b += sizeof(u32);
>  		}
> -		printk("\n");
> +		dev_printk(KERN_DEBUG, &pdev->dev, "%02x: %s\n", b, linebuf);
>  	}
> -#endif
>  }
>  #endif
>  static void mv_dump_all_regs(void __iomem *mmio_base, int port,
>  			     struct pci_dev *pdev)
>  {
> -#ifdef ATA_DEBUG
>  	void __iomem *hc_base = mv_hc_base(mmio_base,
>  					   port >> MV_PORT_HC_SHIFT);
>  	void __iomem *port_base;
>  	int start_port, num_ports, p, start_hc, num_hcs, hc;
>  
> +	if (!pci_dump)
> +		return;
> +	dev_printk(KERN_DEBUG, &pdev->dev, "All regs @ PCI error\n");
>  	if (0 > port) {
>  		start_hc = start_port = 0;
>  		num_ports = 8;		/* shld be benign for 4 port devs */
> @@ -1308,31 +1314,31 @@ static void mv_dump_all_regs(void __iomem *mmio_base, int port,
>  		start_port = port;
>  		num_ports = num_hcs = 1;
>  	}
> -	DPRINTK("All registers for port(s) %u-%u:\n", start_port,
> -		num_ports > 1 ? num_ports - 1 : start_port);
> +	dev_printk(KERN_DEBUG, &pdev->dev,
> +		   "All registers for port(s) %u-%u:\n", start_port,
> +		   num_ports > 1 ? num_ports - 1 : start_port);
>  
>  	if (NULL != pdev) {
> -		DPRINTK("PCI config space regs:\n");
> +		dev_printk(KERN_DEBUG, &pdev->dev, "PCI config space regs:\n");
>  		mv_dump_pci_cfg(pdev, 0x68);
>  	}
> -	DPRINTK("PCI regs:\n");
> -	mv_dump_mem(mmio_base+0xc00, 0x3c);
> -	mv_dump_mem(mmio_base+0xd00, 0x34);
> -	mv_dump_mem(mmio_base+0xf00, 0x4);
> -	mv_dump_mem(mmio_base+0x1d00, 0x6c);
> +	dev_printk(KERN_DEBUG, &pdev->dev, "PCI regs:\n");
> +	mv_dump_mem(&pdev->dev, mmio_base+0xc00, 0x3c);
> +	mv_dump_mem(&pdev->dev, mmio_base+0xd00, 0x34);
> +	mv_dump_mem(&pdev->dev, mmio_base+0xf00, 0x4);
> +	mv_dump_mem(&pdev->dev, mmio_base+0x1d00, 0x6c);
>  	for (hc = start_hc; hc < start_hc + num_hcs; hc++) {
>  		hc_base = mv_hc_base(mmio_base, hc);
> -		DPRINTK("HC regs (HC %i):\n", hc);
> -		mv_dump_mem(hc_base, 0x1c);
> +		dev_printk(KERN_DEBUG, &pdev->dev, "HC regs (HC %i):\n", hc);
> +		mv_dump_mem(&pdev->dev, hc_base, 0x1c);
>  	}
>  	for (p = start_port; p < start_port + num_ports; p++) {
>  		port_base = mv_port_base(mmio_base, p);
> -		DPRINTK("EDMA regs (port %i):\n", p);
> -		mv_dump_mem(port_base, 0x54);
> -		DPRINTK("SATA regs (port %i):\n", p);
> -		mv_dump_mem(port_base+0x300, 0x60);
> +		dev_printk(KERN_DEBUG, &pdev->dev, "EDMA regs (port %i):\n", p);
> +		mv_dump_mem(&pdev->dev, port_base, 0x54);
> +		dev_printk(KERN_DEBUG, &pdev->dev, "SATA regs (port %i):\n", p);
> +		mv_dump_mem(&pdev->dev, port_base+0x300, 0x60);
>  	}
> -#endif
>  }
>  
>  static unsigned int mv_scr_offset(unsigned int sc_reg_in)
> @@ -2969,7 +2975,6 @@ static int mv_pci_error(struct ata_host *host, void __iomem *mmio)
>  
>  	dev_err(host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n", err_cause);
>  
> -	DPRINTK("All regs @ PCI error\n");
>  	mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
>  
>  	writelfl(0, mmio + hpriv->irq_cause_offset);
> 

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux