Hmm, On 22 August 2016 at 18:00, Shaun Tancheff <shaun.tancheff@xxxxxxxxxxx> wrote: > > Timeout for WS is 120 seconds so we should be fine there. > > The number to look for is the: > Max. Sustained Transfer Rate OD (MB/s): 190 8TB (180 5TB) > > Which means the above drives should complete a 2G write in > about 10 to 11 seconds. > > If these were 4Kn drives and we allowed a 16G max then it > would be 80-90 seconds, assuming the write speed didn't > get any better. > > So holding the maximum to around 2G is probably the best > overall, in my opinion. > > -- > Shaun Tancheff On 23 August 2016 at 06:11, Shaun Tancheff <shaun.tancheff@xxxxxxxxxxx> wrote: > > I had thought the conclusion was leave b0 as is and let the WS10 limit > take effect per Martin. If that's your final call then you do not need to add the check for SCT Write Same. (But please make sure that the check for TRIM does not go away) > -- > Shaun Tancheff -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
