From: Tom Yan <tom.ty89@xxxxxxxxx>
scsi_done() was called repeatedly and apparently because of that,
the kernel would call trace when we touch the Control mode page:
Call Trace:
[<ffffffff812ea0d2>] dump_stack+0x63/0x81
[<ffffffff81079cfb>] __warn+0xcb/0xf0
[<ffffffff81079e2d>] warn_slowpath_null+0x1d/0x20
[<ffffffffa00f51b0>] ata_eh_finish+0xe0/0xf0 [libata]
[<ffffffffa00fb830>] sata_pmp_error_handler+0x640/0xa50 [libata]
[<ffffffffa00470ed>] ahci_error_handler+0x1d/0x70 [libahci]
[<ffffffffa00f55f0>] ata_scsi_port_error_handler+0x430/0x770 [libata]
[<ffffffffa00eff8d>] ? ata_scsi_cmd_error_handler+0xdd/0x160 [libata]
[<ffffffffa00f59d7>] ata_scsi_error+0xa7/0xf0 [libata]
[<ffffffffa00913ba>] scsi_error_handler+0xaa/0x560 [scsi_mod]
[<ffffffffa0091310>] ? scsi_eh_get_sense+0x180/0x180 [scsi_mod]
[<ffffffff81098eb8>] kthread+0xd8/0xf0
[<ffffffff815d913f>] ret_from_fork+0x1f/0x40
[<ffffffff81098de0>] ? kthread_worker_fn+0x170/0x170
---[ end trace 8b7501047e928a17 ]---
Removed the unnecessary code and let ata_scsi_translate() do the job.
Also, since ata_mselect_control() has no ATA command to send to the
device, ata_scsi_mode_select_xlat() should return 1 for it, so that
ata_scsi_translate() will finish early to avoid ata_qc_issue().
Signed-off-by: Tom Yan <tom.ty89@xxxxxxxxx>
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 6c424c5..f5c4200 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3720,8 +3720,6 @@ static int ata_mselect_control(struct ata_queued_cmd *qc,
dev->flags |= ATA_DFLAG_D_SENSE;
else
dev->flags &= ~ATA_DFLAG_D_SENSE;
- qc->scsicmd->result = SAM_STAT_GOOD;
- qc->scsicmd->scsi_done(qc->scsicmd);
return 0;
}
@@ -3854,6 +3852,8 @@ static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc)
if (ata_mselect_control(qc, p, pg_len, &fp) < 0) {
fp += hdr_len + bd_len;
goto invalid_param;
+ } else {
+ goto skip; /* No ATA command to send */
}
break;
default: /* invalid page code */
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
