[PATCH v4] libata-scsi: better style in ata_msense_*()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Tom Yan <tom.ty89@xxxxxxxxx>

`changeable` is the "version" of mode page requested by the user.
It will be less confusing/misleading if we do not check it
"together" with the setting bits of the drive.

Not to mention that we currently have ata_mselect_*() implemented
in a way that each of them will serve exclusively a particular bit
on each page. The old style will hence make the condition look even
more unnecessarily arcane if the ata_msense_*() is reflecting more
than one bit.

Signed-off-by: Tom Yan <tom.ty89@xxxxxxxxx>

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index bf4cb21..b00521b 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2424,10 +2424,12 @@ static void modecpy(u8 *dest, const u8 *src, int n, bool changeable)
 static unsigned int ata_msense_caching(u16 *id, u8 *buf, bool changeable)
 {
 	modecpy(buf, def_cache_mpage, sizeof(def_cache_mpage), changeable);
-	if (changeable || ata_id_wcache_enabled(id))
-		buf[2] |= (1 << 2);	/* write cache enable */
-	if (!changeable && !ata_id_rahead_enabled(id))
-		buf[12] |= (1 << 5);	/* disable read ahead */
+	if (changeable) {
+		buf[2] |= (1 << 2);	/* ata_mselect_caching() */
+	} else {
+		buf[2] |= (ata_id_wcache_enabled(id) << 2);	/* write cache enable */
+		buf[12] |= (!ata_id_rahead_enabled(id) << 5);	/* disable read ahead */
+	}
 	return sizeof(def_cache_mpage);
 }
 
@@ -2446,8 +2448,13 @@ static unsigned int ata_msense_control(struct ata_device *dev, u8 *buf,
 					bool changeable)
 {
 	modecpy(buf, def_control_mpage, sizeof(def_control_mpage), changeable);
-	if (changeable || (dev->flags & ATA_DFLAG_D_SENSE))
-		buf[2] |= (1 << 2);	/* Descriptor sense requested */
+	if (changeable) {
+		buf[2] |= (1 << 2);	/* ata_mselect_control() */
+	} else {
+		bool d_sense = (dev->flags & ATA_DFLAG_D_SENSE);
+
+		buf[2] |= (d_sense << 2);	/* descriptor format sense data */
+	}
 	return sizeof(def_control_mpage);
 }
 
-- 
2.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux