Re: [PATCH v6] leds: documentation: 'ide-disk' to 'disk-activity'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Stephan,

On 06/24/2016 07:16 PM, Stephan Linz wrote:
Cc: Joseph Jezak <josejx@xxxxxxxxxx>
Cc: Jörg Sommer <joerg@xxxxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Signed-off-by: Stephan Linz <linz@xxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
---
Changes in v6:
   - Reorganize v5.

Changes in v5:
   - Keep documentation for the old 'ide-disk' device tree
     binding, but mark as deprecated and refer to the new
     trigger 'disk-activity'.

Changes in v4:
   - Keep the 'ide-disk' trigger and add a second one
     for 'disk-activity'.

Changes in v3:
   - Port to kernel 4.x
   - Split into platform independent and dependent parts.

v2: https://patchwork.ozlabs.org/patch/117485/
v1: http://dev.gentoo.org/~josejx/ata.patch
---
  Documentation/devicetree/bindings/leds/common.txt    | 4 +++-
  Documentation/devicetree/bindings/leds/leds-gpio.txt | 4 ++--
  Documentation/laptops/asus-laptop.txt                | 2 +-
  Documentation/leds/leds-class.txt                    | 2 +-
  4 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index af10678..93ef6e6 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -26,7 +26,9 @@ Optional properties for child nodes:
       "default-on" - LED will turn on (but for leds-gpio see "default-state"
  		    property in Documentation/devicetree/bindings/gpio/led.txt)
       "heartbeat" - LED "double" flashes at a load average based rate
-     "ide-disk" - LED indicates disk activity
+     "disk-activity" - LED indicates disk activity
+     "ide-disk" - LED indicates IDE disk activity (deprecated),
+                  in new implementations use "disk-activity"
       "timer" - LED flashes at a fixed, configurable rate

  - led-max-microamp : Maximum LED supply current in microamperes. This property
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index cbbeb18..5b1b43a 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -33,9 +33,9 @@ Examples:
  leds {
  	compatible = "gpio-leds";
  	hdd {
-		label = "IDE Activity";
+		label = "Disk Activity";
  		gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
-		linux,default-trigger = "ide-disk";
+		linux,default-trigger = "disk-activity";
  	};

  	fault {
diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt
index 79a1bc6..5f28587 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/laptops/asus-laptop.txt
@@ -72,7 +72,7 @@ LEDs
      echo 1 >  /sys/class/leds/asus::mail/brightness
    will switch the mail LED on.
    You can also know if they are on/off by reading their content and use
-  kernel triggers like ide-disk or heartbeat.
+  kernel triggers like disk-activity or heartbeat.

  Backlight
  ---------
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
index 44f5e6b..f1f7ec9 100644
--- a/Documentation/leds/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -11,7 +11,7 @@ brightness support so will just be turned on for non-zero brightness settings.
  The class also introduces the optional concept of an LED trigger. A trigger
  is a kernel based source of led events. Triggers can either be simple or
  complex. A simple trigger isn't configurable and is designed to slot into
-existing subsystems with minimal additional code. Examples are the ide-disk,
+existing subsystems with minimal additional code. Examples are the disk-activity,
  nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
  optimises away.



Applied, thanks.

--
Best regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux