Hi Brian,
On Wed, Jun 22, 2016 at 11:01 PM, Brian Norris
<computersforpeace@xxxxxxxxx> wrote:
> On Wed, Jun 22, 2016 at 07:29:46AM -0400, Yendapally Reddy Dhananjaya Reddy wrote:
>> Add support for the PWM controller present in Broadcom's iProc
>> family of SoCs. This driver is derived from the pwm-bcm-kona
>> driver, with changes to the register offsets and bit positions.
>> It has been tested on the Northstar+ bcm958625HR board.
>>
>> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@xxxxxxxxxxxx>
>> ---
>> drivers/pwm/Kconfig | 10 ++
>> drivers/pwm/Makefile | 1 +
>> drivers/pwm/pwm-bcm-iproc.c | 327 ++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 338 insertions(+)
>> create mode 100644 drivers/pwm/pwm-bcm-iproc.c
>>
> [...]
>> diff --git a/drivers/pwm/pwm-bcm-iproc.c b/drivers/pwm/pwm-bcm-iproc.c
>> new file mode 100644
>> index 0000000..952c457
>> --- /dev/null
>> +++ b/drivers/pwm/pwm-bcm-iproc.c
>> @@ -0,0 +1,327 @@
> [...]
>> +static const struct pwm_ops iproc_pwm_ops = {
>> + .config = iproc_pwmc_config_check,
>> + .set_polarity = iproc_pwmc_set_polarity,
>> + .enable = iproc_pwmc_enable,
>> + .disable = iproc_pwmc_disable,
>> + .owner = THIS_MODULE,
>> +};
>
> Have you considered trying the new apply() callback instead of
> config()/set_polarity()/enable()/disable()?
>
I will make it and provide a v5 version patches.
Thanks
Dhananjay
> [...]
>
> Brian
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
