This patch set adds support for SATA3 interface available in Broadcom NSP SoC. The first patch removes the "stb" references in the ahci documentation to make it generic for Broadcom SoC's. The second patch adds NSP support to the ahci documentation. The third patch adds the NSP SATA phy documentation. The fourth patch renames the Broadcom stb ahci driver to common Broadcom ahci driver and fifth patch supports NSP ahci. The sixth patch adds support for NSP SATA3 phy. The seventh patch contains the device tree changes for NSP SoC. This patch set has been tested on NSP bcm958625HR board. This patch set is based on v4.7.0-rc1 and is available from github repo: https://github.com/Broadcom/cygnus-linux.git branch: nsp-sata-v1 Yendapally Reddy Dhananjaya Reddy (7): dt-bindings: ata: rename brcm,sata-brcmstb.txt to brcm,sata-brcm.txt dt-bindings: ata: add support for Broadcom NSP SoC ahci dt-bindings: phy: Add documentation for NSP SATA PHY ata: ahci_brcmstb: rename to support across Broadcom SoC's ata: ahci_brcm: Add support for Broadcom NSP SoC phy: Add SATA3 PHY support for Broadcom NSP SoC ARM: dts: nsp: Add sata device tree entry .../{brcm,sata-brcmstb.txt => brcm,sata-brcm.txt} | 9 +-- .../devicetree/bindings/phy/brcm-sata-phy.txt | 4 +- arch/arm/boot/dts/bcm-nsp.dtsi | 42 +++++++++++ arch/arm/boot/dts/bcm958625k.dts | 12 ++++ drivers/ata/Kconfig | 8 +-- drivers/ata/Makefile | 2 +- drivers/ata/{ahci_brcmstb.c => ahci_brcm.c} | 46 +++++++++--- drivers/phy/phy-brcm-sata.c | 81 ++++++++++++++++++++++ 8 files changed, 184 insertions(+), 20 deletions(-) rename Documentation/devicetree/bindings/ata/{brcm,sata-brcmstb.txt => brcm,sata-brcm.txt} (81%) rename drivers/ata/{ahci_brcmstb.c => ahci_brcm.c} (91%) -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html