When performing an async scan, make sure the kthread doing scanning doesn't start before the scsi host is fully initialized. Signed-off-by: Brian King <brking@xxxxxxxxxxxxxxxxxx> --- drivers/scsi/ipr.c | 9 +++++++++ drivers/scsi/ipr.h | 1 + 2 files changed, 10 insertions(+) diff -puN drivers/scsi/ipr.c~ipr_async_scan_fixup drivers/scsi/ipr.c --- linux-2.6.git/drivers/scsi/ipr.c~ipr_async_scan_fixup 2016-06-01 21:04:14.088698640 -0500 +++ linux-2.6.git-bjking1/drivers/scsi/ipr.c 2016-06-10 15:35:56.738201739 -0500 @@ -3287,6 +3287,11 @@ static void ipr_worker_thread(struct wor return; } + if (!ioa_cfg->scan_enabled) { + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + return; + } + restart: do { did_work = 0; @@ -10360,6 +10365,7 @@ static void ipr_remove(struct pci_dev *p static int ipr_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) { struct ipr_ioa_cfg *ioa_cfg; + unsigned long flags; int rc, i; rc = ipr_probe_ioa(pdev, dev_id); @@ -10412,7 +10418,10 @@ static int ipr_probe(struct pci_dev *pde } } + spin_lock_irqsave(ioa_cfg->host->host_lock, flags); + ioa_cfg->scan_enabled = 1; schedule_work(&ioa_cfg->work_q); + spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); return 0; } diff -puN drivers/scsi/ipr.h~ipr_async_scan_fixup drivers/scsi/ipr.h --- linux-2.6.git/drivers/scsi/ipr.h~ipr_async_scan_fixup 2016-06-01 21:04:17.186678232 -0500 +++ linux-2.6.git-bjking1/drivers/scsi/ipr.h 2016-06-10 15:35:56.739201727 -0500 @@ -1475,6 +1475,7 @@ struct ipr_ioa_cfg { u8 in_ioa_bringdown:1; u8 ioa_unit_checked:1; u8 dump_taken:1; + u8 scan_enabled:1; u8 scan_done:1; u8 needs_hard_reset:1; u8 dual_raid:1; _ -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html