SATA drives may support write same via SCT. This is useful
for setting the drive contents to a specific pattern (0's).
Signed-off-by: Shaun Tancheff <shaun.tancheff@xxxxxxxxxxx>
---
v2:
- Remove fugly ata hacking from sd.c
---
drivers/ata/libata-scsi.c | 34 ++++++++++++++++++++++++++++++++++
drivers/scsi/sd.c | 2 +-
include/linux/ata.h | 43 +++++++++++++++++++++++++++++++++++++++++++
include/scsi/scsi_device.h | 1 +
4 files changed, 79 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index bfec66f..b73eace 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1204,6 +1204,9 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
if (!ata_id_has_unload(dev->id))
dev->flags |= ATA_DFLAG_NO_UNLOAD;
+ if (ata_id_sct_write_same(dev->id))
+ sdev->sct_write_same = 1;
+
/* configure max sectors */
blk_queue_max_hw_sectors(q, dev->max_sectors);
@@ -3305,6 +3308,37 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
goto invalid_param_len;
buf = page_address(sg_page(scsi_sglist(scmd)));
+
+ if (ata_id_sct_write_same(dev->id)) {
+ u16 *sctpg = buf;
+
+ put_unaligned_le16(0x0002, &sctpg[0]); /* SCT_ACT_WRITE_SAME */
+ put_unaligned_le16(0x0101, &sctpg[1]); /* WRITE PTRN FG */
+ put_unaligned_le64(block, &sctpg[2]);
+ put_unaligned_le64(n_block, &sctpg[6]);
+ put_unaligned_le32(0u, &sctpg[10]);
+
+ tf->hob_feature = 0;
+ tf->feature = 0;
+ tf->hob_nsect = 0;
+ tf->nsect = 1;
+ tf->lbah = 0;
+ tf->lbam = 0;
+ tf->lbal = ATA_CMD_STANDBYNOW1;
+ tf->hob_lbah = 0;
+ tf->hob_lbam = 0;
+ tf->hob_lbal = 0;
+ tf->device = ATA_CMD_STANDBYNOW1;
+ tf->protocol = ATA_PROT_DMA;
+ tf->command = ATA_CMD_WRITE_LOG_DMA_EXT;
+ tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE |
+ ATA_TFLAG_LBA48 | ATA_TFLAG_WRITE;
+
+ ata_qc_set_pc_nbytes(qc);
+
+ return 0;
+ }
+
size = ata_set_lba_range_entries(buf, 512, block, n_block);
if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index f459dff..b5ffcd3 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -794,7 +794,7 @@ static void sd_config_write_same(struct scsi_disk *sdkp)
struct request_queue *q = sdkp->disk->queue;
unsigned int logical_block_size = sdkp->device->sector_size;
- if (sdkp->device->no_write_same) {
+ if (sdkp->device->no_write_same && !sdkp->device->sct_write_same) {
sdkp->max_ws_blocks = 0;
goto out;
}
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 99346be..4132de3 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -104,6 +104,7 @@ enum {
ATA_ID_CFA_KEY_MGMT = 162,
ATA_ID_CFA_MODES = 163,
ATA_ID_DATA_SET_MGMT = 169,
+ ATA_ID_SCT_CMD_XPORT = 206,
ATA_ID_ROT_SPEED = 217,
ATA_ID_PIO4 = (1 << 1),
@@ -778,6 +779,48 @@ static inline bool ata_id_sense_reporting_enabled(const u16 *id)
}
/**
+ *
+ * Word: 206 - SCT Command Transport
+ * 15:12 - Vendor Specific
+ * 11:6 - Reserved
+ * 5 - SCT Command Transport Data Tables supported
+ * 4 - SCT Command Transport Features Control supported
+ * 3 - SCT Command Transport Error Recovery Control supported
+ * 2 - SCT Command Transport Write Same supported
+ * 1 - SCT Command Transport Long Sector Access supported
+ * 0 - SCT Command Transport supported
+ */
+static inline bool ata_id_sct_data_tables(const u16 *id)
+{
+ return id[ATA_ID_SCT_CMD_XPORT] & (1 << 5) ? true : false;
+}
+
+static inline bool ata_id_sct_features_ctrl(const u16 *id)
+{
+ return id[ATA_ID_SCT_CMD_XPORT] & (1 << 4) ? true : false;
+}
+
+static inline bool ata_id_sct_error_recovery_ctrl(const u16 *id)
+{
+ return id[ATA_ID_SCT_CMD_XPORT] & (1 << 3) ? true : false;
+}
+
+static inline bool ata_id_sct_write_same(const u16 *id)
+{
+ return id[ATA_ID_SCT_CMD_XPORT] & (1 << 2) ? true : false;
+}
+
+static inline bool ata_id_sct_long_sector_access(const u16 *id)
+{
+ return id[ATA_ID_SCT_CMD_XPORT] & (1 << 1) ? true : false;
+}
+
+static inline bool ata_id_sct_supported(const u16 *id)
+{
+ return id[ATA_ID_SCT_CMD_XPORT] & (1 << 0) ? true : false;
+}
+
+/**
* ata_id_major_version - get ATA level of drive
* @id: Identify data
*
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index a6c346d..66f5af7 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -157,6 +157,7 @@ struct scsi_device {
unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */
unsigned no_write_same:1; /* no WRITE SAME command */
+ unsigned sct_write_same:1; /* Has WRITE SAME via SCT Command */
unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
--
2.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
