The new driver is named ahci_spear1340 and is only compile tested. Once
it is tested on the real hardware and verified to work correctly, the legacy
platform code (which depends on the deprecated struct ahci_platform_data)
can be removed.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
drivers/ata/Kconfig | 9 ++
drivers/ata/Makefile | 1 +
drivers/ata/ahci_spear1340.c | 222 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 232 insertions(+)
create mode 100644 drivers/ata/ahci_spear1340.c
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 6379a00..32046d4 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -106,6 +106,15 @@ config AHCI_DA850
If unsure, say N.
+config AHCI_SPEAR1340
+ tristate "ST SPEAr1340 AHCI SATA support (experimental)"
+ depends on MACH_SPEAR1340
+ help
+ This option enables support for the ST SPEAr1340 SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
config AHCI_ST
tristate "ST AHCI SATA support"
depends on ARCH_STI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 0646d83..45e8df9 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_SPEAR1340) += ahci_spear1340.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o
# SFF w/ custom DMA
diff --git a/drivers/ata/ahci_spear1340.c b/drivers/ata/ahci_spear1340.c
new file mode 100644
index 0000000..f1d798e
--- /dev/null
+++ b/drivers/ata/ahci_spear1340.c
@@ -0,0 +1,222 @@
+/*
+ * ST SPEAr1340 AHCI SATA platform driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include "ahci.h"
+
+#define VA_MISC_BASE IOMEM(0xFD700000)
+
+/* Power Management Registers */
+#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100)
+#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104)
+#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108)
+
+#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318)
+#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C)
+#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320)
+
+/* PCIE - SATA configuration registers */
+#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424)
+/* PCIE CFG MASks */
+#define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11)
+#define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10)
+#define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9)
+#define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8)
+#define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4)
+#define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3)
+#define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2)
+#define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1)
+#define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
+#define SPEAR1340_PCIE_SATA_SEL_SATA (1)
+#define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F
+#define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
+ SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+ SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+ SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+ SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+#define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
+ SPEAR1340_SATA_CFG_PM_CLK_EN | \
+ SPEAR1340_SATA_CFG_POWERUP_RESET | \
+ SPEAR1340_SATA_CFG_RX_CLK_EN | \
+ SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428)
+#define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31)
+#define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27)
+#define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
+#define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
+#define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
+#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+ SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+ SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+#define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+ (SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+#define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+ SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+static void ahci_spear1340_miphy_init(struct device *dev, void __iomem *addr)
+{
+ writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
+ writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
+ SPEAR1340_PCIE_MIPHY_CFG);
+ /* Switch on sata power domain */
+ writel(readl(SPEAR1340_PCM_CFG) | 0x800, SPEAR1340_PCM_CFG);
+ msleep(20);
+ /* Disable PCIE SATA Controller reset */
+ writel(readl(SPEAR1340_PERIP1_SW_RST) & ~0x1000,
+ SPEAR1340_PERIP1_SW_RST);
+ msleep(20);
+}
+
+static void ahci_spear1340_miphy_exit(struct device *dev)
+{
+ writel(0, SPEAR1340_PCIE_SATA_CFG);
+ writel(0, SPEAR1340_PCIE_MIPHY_CFG);
+
+ /* Enable PCIE SATA Controller reset */
+ writel(readl(SPEAR1340_PERIP1_SW_RST) | 0x1000,
+ SPEAR1340_PERIP1_SW_RST);
+ msleep(20);
+ /* Switch off sata power domain */
+ writel(readl(SPEAR1340_PCM_CFG) & ~0x800, SPEAR1340_PCM_CFG);
+ msleep(20);
+}
+
+static void ahci_spear1340_host_stop(struct ata_host *host)
+{
+ struct device *dev = host->dev;
+ struct ahci_host_priv *hpriv = host->private_data;
+
+ ahci_spear1340_miphy_exit(dev);
+
+ ahci_platform_disable_resources(hpriv);
+}
+
+static struct ata_port_operations ahci_spear1340_port_ops = {
+ .inherits = &ahci_platform_ops,
+ .host_stop = ahci_spear1340_host_stop,
+};
+
+static const struct ata_port_info ahci_spear1340_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_spear1340_port_ops,
+};
+
+static int ahci_spear1340_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ int rc;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ ahci_spear1340_miphy_init(dev, hpriv->mmio);
+
+ rc = ahci_platform_init_host(pdev, hpriv,
+ &ahci_spear1340_port_info, 0, 0);
+ if (rc)
+ goto miphy_exit;
+
+ return 0;
+miphy_exit:
+ ahci_spear1340_miphy_exit(dev);
+ ahci_platform_disable_resources(hpriv);
+ return rc;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ahci_spear1340_suspend(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_suspend_host(dev);
+ if (rc)
+ return rc;
+
+ if (dev->power.power_state.event != PM_EVENT_FREEZE)
+ ahci_spear1340_miphy_exit(dev);
+
+ ahci_platform_disable_resources(hpriv);
+
+ return 0;
+}
+
+static int ahci_spear1340_resume(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ if (dev->power.power_state.event != PM_EVENT_THAW)
+ ahci_spear1340_miphy_init(dev, NULL);
+
+ rc = ahci_platform_resume_host(dev);
+ if (rc)
+ goto disable_resources;
+
+ /* We resumed so update PM runtime state */
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+
+ return rc;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ahci_spear1340_pm_ops, ahci_spear1340_suspend,
+ ahci_spear1340_resume);
+
+static struct of_device_id ahci_spear1340_of_match[] = {
+ { .compatible = "snps,spear-ahci" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ahci_spear1340_of_match);
+
+static struct platform_driver ahci_spear1340_driver = {
+ .probe = ahci_spear1340_probe,
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = "ahci_spear1340",
+ .owner = THIS_MODULE,
+ .of_match_table = ahci_spear1340_of_match,
+ .pm = &ahci_spear1340_pm_ops,
+ },
+};
+module_platform_driver(ahci_spear1340_driver);
+
+MODULE_DESCRIPTION("ST SPEAr1340 AHCI SATA platform driver");
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
