Roger,
On Thursday 06 March 2014 08:08 PM, Roger Quadros wrote:
As this driver is no longer USB specific, use generic clock names.
- Use 'wkupclk', 'sysclk' and 'refclk' clock-names. Update DT binding info.
- Fix PLL_SD_SHIFT from 9 to 10
- Don't separate prepare/unprepare clock from enable/disable. This
ensures optimal power savings.
Update omap5 usb3_phy device tree node.
CC: Benoît Cousson <bcousson@xxxxxxxxxxxx>
CC: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
Documentation/devicetree/bindings/phy/ti-phy.txt | 12 ++++++
arch/arm/boot/dts/omap5.dtsi | 7 ++-
drivers/phy/phy-ti-pipe3.c | 55 ++++++++++++------------
Here you have to split the patch. omap5.dtsi should be a separate patch
to Tony. I could take only phy-ti-pipe3.c again since ti-phy.txt is only
in Felipe's branch.
Regards
Kishon
3 files changed, 46 insertions(+), 28 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 28e674b..8d13349 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -59,6 +59,12 @@ Required properties:
filled in "reg".
- #phy-cells: determine the number of cells that should be given in the
phandle while referencing this phy.
+ - clocks: a list of phandles and clock-specifier pairs, one for each entry in
+ clock-names.
+ - clock-names: should include:
+ * "wkupclk" - wakup clock.
+ * "sysclk" - system clock.
+ * "refclk" - reference clock.
Optional properties:
- ctrl-module : phandle of the control module used by PHY driver to power on
@@ -74,4 +80,10 @@ usb3phy@4a084400 {
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_usb>;
#phy-cells = <0>;
+ clocks = <&usb_phy_cm_clk32k>,
+ <&sys_clkin>,
+ <&usb_otg_ss_refclk960m>;
+ clock-names = "wkupclk",
+ "sysclk",
+ "refclk";
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 859a800..e47601a 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -778,7 +778,12 @@
<0x4a084800 0x64>,
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
- ctrl-module = <&omap_control_usb3phy>;
+ clocks = <&usb_phy_cm_clk32k>,
+ <&sys_clkin>,
+ <&usb_otg_ss_refclk960m>;
+ clock-names = "wkupclk",
+ "sysclk",
+ "refclk";
#phy-cells = <0>;
};
};
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index fd029b1..211703c 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -45,7 +45,7 @@
#define PLL_SELFREQDCO_MASK 0x0000000E
#define PLL_SELFREQDCO_SHIFT 0x1
#define PLL_SD_MASK 0x0003FC00
-#define PLL_SD_SHIFT 0x9
+#define PLL_SD_SHIFT 10
#define SET_PLL_GO 0x1
#define PLL_TICOPWDN 0x10000
#define PLL_LOCK 0x2
@@ -72,7 +72,7 @@ struct ti_pipe3 {
struct device *control_dev;
struct clk *wkupclk;
struct clk *sys_clk;
- struct clk *optclk;
+ struct clk *refclk;
};
struct pipe3_dpll_map {
@@ -270,23 +270,21 @@ static int ti_pipe3_probe(struct platform_device *pdev)
phy->dev = &pdev->dev;
- phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
+ phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
- dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
+ dev_err(&pdev->dev, "unable to get wkupclk\n");
return PTR_ERR(phy->wkupclk);
}
- clk_prepare(phy->wkupclk);
- phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
- if (IS_ERR(phy->optclk)) {
- dev_err(&pdev->dev, "unable to get usb_otg_ss_refclk960m\n");
- return PTR_ERR(phy->optclk);
+ phy->refclk = devm_clk_get(phy->dev, "refclk");
+ if (IS_ERR(phy->refclk)) {
+ dev_err(&pdev->dev, "unable to get refclk\n");
+ return PTR_ERR(phy->refclk);
}
- clk_prepare(phy->optclk);
- phy->sys_clk = devm_clk_get(phy->dev, "sys_clkin");
+ phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
if (IS_ERR(phy->sys_clk)) {
- pr_err("%s: unable to get sys_clkin\n", __func__);
+ dev_err(&pdev->dev, "unable to get sysclk\n");
return -EINVAL;
}
@@ -326,10 +324,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
static int ti_pipe3_remove(struct platform_device *pdev)
{
- struct ti_pipe3 *phy = platform_get_drvdata(pdev);
-
- clk_unprepare(phy->wkupclk);
- clk_unprepare(phy->optclk);
if (!pm_runtime_suspended(&pdev->dev))
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -343,8 +337,10 @@ static int ti_pipe3_runtime_suspend(struct device *dev)
{
struct ti_pipe3 *phy = dev_get_drvdata(dev);
- clk_disable(phy->wkupclk);
- clk_disable(phy->optclk);
+ if (!IS_ERR(phy->wkupclk))
+ clk_disable_unprepare(phy->wkupclk);
+ if (!IS_ERR(phy->refclk))
+ clk_disable_unprepare(phy->refclk);
return 0;
}
@@ -354,22 +350,27 @@ static int ti_pipe3_runtime_resume(struct device *dev)
u32 ret = 0;
struct ti_pipe3 *phy = dev_get_drvdata(dev);
- ret = clk_enable(phy->optclk);
- if (ret) {
- dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
- goto err1;
+ if (!IS_ERR(phy->refclk)) {
+ ret = clk_prepare_enable(phy->refclk);
+ if (ret) {
+ dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
+ goto err1;
+ }
}
- ret = clk_enable(phy->wkupclk);
- if (ret) {
- dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
- goto err2;
+ if (!IS_ERR(phy->wkupclk)) {
+ ret = clk_prepare_enable(phy->wkupclk);
+ if (ret) {
+ dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
+ goto err2;
+ }
}
return 0;
err2:
- clk_disable(phy->optclk);
+ if (!IS_ERR(phy->refclk))
+ clk_disable_unprepare(phy->refclk);
err1:
return ret;
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
