From: Roger Quadros <rogerq@xxxxxx>
Some platforms have a PHY hooked up to the
SATA controller. The PHY needs to be initialized
and powered up for SATA to work. We do that
using the PHY framework.
CC: Balaji T K <balajitk@xxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/ata/ahci.h | 2 ++
drivers/ata/ahci_platform.c | 47 +++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 47 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index bf8100c..3ab7ac9 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -37,6 +37,7 @@
#include <linux/clk.h>
#include <linux/libata.h>
+#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
/* Enclosure Management Control */
@@ -325,6 +326,7 @@ struct ahci_host_priv {
u32 em_msg_type; /* EM message type */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
struct regulator *target_pwr; /* Optional */
+ struct phy *phy; /* If platform uses phy */
void *plat_data; /* Other platform data */
/*
* Optional ahci_start_engine override, if not set this gets set to the
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index d7e55ba..99d38c1 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
+#include <linux/phy/phy.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
@@ -147,6 +148,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
* the following order:
* 1) Regulator
* 2) Clocks (through ahci_platform_enable_clks)
+ * 3) Phy
*
* If resource enabling fails at any point the previous enabled
* resources are disabled in reverse order.
@@ -171,8 +173,23 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
if (rc)
goto disable_regulator;
+ if (hpriv->phy) {
+ rc = phy_init(hpriv->phy);
+ if (rc)
+ goto disable_clks;
+
+ rc = phy_power_on(hpriv->phy);
+ if (rc) {
+ phy_exit(hpriv->phy);
+ goto disable_clks;
+ }
+ }
+
return 0;
+disable_clks:
+ ahci_platform_disable_clks(hpriv);
+
disable_regulator:
if (hpriv->target_pwr)
regulator_disable(hpriv->target_pwr);
@@ -186,14 +203,20 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
*
* This function disables all ahci_platform managed resources in
* the following order:
- * 1) Clocks (through ahci_platform_disable_clks)
- * 2) Regulator
+ * 1) Phy
+ * 2) Clocks (through ahci_platform_disable_clks)
+ * 3) Regulator
*
* LOCKING:
* None.
*/
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
{
+ if (hpriv->phy) {
+ phy_power_off(hpriv->phy);
+ phy_exit(hpriv->phy);
+ }
+
ahci_platform_disable_clks(hpriv);
if (hpriv->target_pwr)
@@ -222,6 +245,7 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
* 2) regulator for controlling the targets power (optional)
* 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
* or for non devicetree enabled platforms a single clock
+ * 4) phy (optional)
*
* LOCKING:
* None.
@@ -283,6 +307,25 @@ struct ahci_host_priv *ahci_platform_get_resources(
hpriv->clks[i] = clk;
}
+ hpriv->phy = devm_phy_get(dev, "sata-phy");
+ if (IS_ERR(hpriv->phy)) {
+ rc = PTR_ERR(hpriv->phy);
+ switch (rc) {
+ case -ENODEV:
+ case -ENOSYS:
+ /* continue normally */
+ hpriv->phy = NULL;
+ break;
+
+ case -EPROBE_DEFER:
+ goto err_out;
+
+ default:
+ dev_err(dev, "couldn't get sata-phy\n");
+ goto err_out;
+ }
+ }
+
devres_remove_group(dev, NULL);
return hpriv;
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
