ahci_probe consists of 3 steps: 1) Get resources (get mmio, clks, regulator) 2) Enable resources, handled by ahci_platform_enable_resouces 3) The more or less standard ahci-host controller init sequence This commit refactors step 1 and 3 into separate functions, so the platform drivers for AHCI implementations which need a specific order in step 2, and / or need to do some custom register poking at some time, can re-use ahci-platform.c code without needing to copy and paste it. Note that ahci_platform_init_host's prototype takes the 3 non function members of ahci_platform_data as arguments, the idea is that drivers using the new exported utility functions will not use ahci_platform_data at all, and hopefully in the future ahci_platform_data can go away entirely. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/ata/ahci_platform.c | 195 ++++++++++++++++++++++++++++-------------- include/linux/ahci_platform.h | 14 +++ 2 files changed, 144 insertions(+), 65 deletions(-) diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 6ebbc17..7f3f2ac 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -201,64 +201,64 @@ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) } EXPORT_SYMBOL_GPL(ahci_platform_disable_resources); -static void ahci_put_clks(struct ahci_host_priv *hpriv) +static void ahci_platform_put_resources(struct device *dev, void *res) { + struct ahci_host_priv *hpriv = res; int c; for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) clk_put(hpriv->clks[c]); } -static int ahci_probe(struct platform_device *pdev) +/** + * ahci_platform_get_resources - Get platform resources + * @pdev: platform device to get resources for + * + * This function allocates an ahci_host_priv struct, and gets the + * following resources, storing a reference to them inside the returned + * struct: + * + * 1) mmio registers (IORESOURCE_MEM 0, mandatory) + * 2) regulator for controlling the targets power (optional) + * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node, + * or for non devicetree enabled platforms a single clock + * + * LOCKING: + * None. + * + * RETURNS: + * The allocated ahci_host_priv on success, otherwise an ERR_PTR value + */ +struct ahci_host_priv *ahci_platform_get_resources( + struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct ahci_platform_data *pdata = dev_get_platdata(dev); - const struct platform_device_id *id = platform_get_device_id(pdev); - struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0]; - const struct ata_port_info *ppi[] = { &pi, NULL }; struct ahci_host_priv *hpriv; - struct ata_host *host; - struct resource *mem; struct clk *clk; - int irq; - int n_ports; - int i; - int rc; + int i, rc = -ENOMEM; - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(dev, "no mmio space\n"); - return -EINVAL; - } + if (!devres_open_group(dev, NULL, GFP_KERNEL)) + return ERR_PTR(-ENOMEM); - irq = platform_get_irq(pdev, 0); - if (irq <= 0) { - dev_err(dev, "no irq\n"); - return -EINVAL; - } + hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv), + GFP_KERNEL); + if (!hpriv) + goto err_out; - if (pdata && pdata->ata_port_info) - pi = *pdata->ata_port_info; + devres_add(dev, hpriv); - hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); - if (!hpriv) { - dev_err(dev, "can't alloc ahci_host_priv\n"); - return -ENOMEM; - } - - hpriv->flags |= (unsigned long)pi.private_data; - - hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); + hpriv->mmio = devm_ioremap_resource(dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0)); if (!hpriv->mmio) { - dev_err(dev, "can't map %pR\n", mem); - return -ENOMEM; + dev_err(dev, "no mmio space\n"); + goto err_out; } hpriv->target_pwr = devm_regulator_get_optional(dev, "target"); if (IS_ERR(hpriv->target_pwr)) { rc = PTR_ERR(hpriv->target_pwr); if (rc == -EPROBE_DEFER) - return -EPROBE_DEFER; + goto err_out; hpriv->target_pwr = NULL; } @@ -277,33 +277,62 @@ static int ahci_probe(struct platform_device *pdev) if (IS_ERR(clk)) { rc = PTR_ERR(clk); if (rc == -EPROBE_DEFER) - goto free_clk; + goto err_out; break; } hpriv->clks[i] = clk; } - rc = ahci_platform_enable_resources(hpriv); - if (rc) - goto free_clk; + devres_remove_group(dev, NULL); + return hpriv; - /* - * Some platforms might need to prepare for mmio region access, - * which could be done in the following init call. So, the mmio - * region shouldn't be accessed before init (if provided) has - * returned successfully. - */ - if (pdata && pdata->init) { - rc = pdata->init(dev, hpriv->mmio); - if (rc) - goto disable_resources; - } +err_out: + devres_release_group(dev, NULL); + return ERR_PTR(rc); +} +EXPORT_SYMBOL_GPL(ahci_platform_get_resources); + +/** + * ahci_platform_init_host - Bring up an ahci-platform host + * @pdev: platform device pointer for the host + * @hpriv: ahci-host private data for the host + * @pi_template: template for the ata_port_info to use + * @force_port_map: param passed to ahci_save_initial_config + * @mask_port_map: param passed to ahci_save_initial_config + * + * This function does all the usual steps needed to bring up an + * ahci-platform host, note any necessary resources (ie clks, phy, etc.) + * must be initialized / enabled before calling this. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_init_host(struct platform_device *pdev, + struct ahci_host_priv *hpriv, + const struct ata_port_info *pi_template, + unsigned int force_port_map, + unsigned int mask_port_map) +{ + struct device *dev = &pdev->dev; + struct ata_port_info pi = *pi_template; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct ata_host *host; + int i, irq, n_ports, rc; - ahci_save_initial_config(dev, hpriv, - pdata ? pdata->force_port_map : 0, - pdata ? pdata->mask_port_map : 0); + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(dev, "no irq\n"); + return -EINVAL; + } /* prepare host */ + hpriv->flags |= (unsigned long)pi.private_data; + + ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map); + if (hpriv->cap & HOST_CAP_NCQ) pi.flags |= ATA_FLAG_NCQ; @@ -320,10 +349,8 @@ static int ahci_probe(struct platform_device *pdev) n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); host = ata_host_alloc_pinfo(dev, ppi, n_ports); - if (!host) { - rc = -ENOMEM; - goto pdata_exit; - } + if (!host) + return -ENOMEM; host->private_data = hpriv; @@ -338,7 +365,8 @@ static int ahci_probe(struct platform_device *pdev) for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; - ata_port_desc(ap, "mmio %pR", mem); + ata_port_desc(ap, "mmio %pR", + platform_get_resource(pdev, IORESOURCE_MEM, 0)); ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); /* set enclosure management message type */ @@ -352,13 +380,53 @@ static int ahci_probe(struct platform_device *pdev) rc = ahci_reset_controller(host); if (rc) - goto pdata_exit; + return rc; ahci_init_controller(host); ahci_print_info(host, "platform"); - rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED, - &ahci_platform_sht); + return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED, + &ahci_platform_sht); +} +EXPORT_SYMBOL_GPL(ahci_platform_init_host); + +static int ahci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ahci_platform_data *pdata = dev_get_platdata(dev); + const struct platform_device_id *id = platform_get_device_id(pdev); + const struct ata_port_info *pi_template; + struct ahci_host_priv *hpriv; + int rc; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + /* + * Some platforms might need to prepare for mmio region access, + * which could be done in the following init call. So, the mmio + * region shouldn't be accessed before init (if provided) has + * returned successfully. + */ + if (pdata && pdata->init) { + rc = pdata->init(dev, hpriv->mmio); + if (rc) + goto disable_resources; + } + + if (pdata && pdata->ata_port_info) + pi_template = pdata->ata_port_info; + else + pi_template = &ahci_port_info[id ? id->driver_data : 0]; + + rc = ahci_platform_init_host(pdev, hpriv, pi_template, + pdata ? pdata->force_port_map : 0, + pdata ? pdata->mask_port_map : 0); if (rc) goto pdata_exit; @@ -368,8 +436,6 @@ pdata_exit: pdata->exit(dev); disable_resources: ahci_platform_disable_resources(hpriv); -free_clk: - ahci_put_clks(hpriv); return rc; } @@ -383,7 +449,6 @@ static void ahci_host_stop(struct ata_host *host) pdata->exit(dev); ahci_platform_disable_resources(hpriv); - ahci_put_clks(hpriv); } #ifdef CONFIG_PM_SLEEP diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h index b674b01..b80c51c 100644 --- a/include/linux/ahci_platform.h +++ b/include/linux/ahci_platform.h @@ -20,7 +20,14 @@ struct device; struct ata_port_info; struct ahci_host_priv; +struct platform_device; +/* + * Note ahci_platform_data is deprecated, it is only kept around for use + * by the old da850 and spear13xx ahci code. + * New drivers should instead declare their own platform_driver struct, and + * use ahci_platform* functions in their own probe, suspend and resume methods. + */ struct ahci_platform_data { int (*init)(struct device *dev, void __iomem *addr); void (*exit)(struct device *dev); @@ -35,5 +42,12 @@ int ahci_platform_enable_clks(struct ahci_host_priv *hpriv); void ahci_platform_disable_clks(struct ahci_host_priv *hpriv); int ahci_platform_enable_resources(struct ahci_host_priv *hpriv); void ahci_platform_disable_resources(struct ahci_host_priv *hpriv); +struct ahci_host_priv *ahci_platform_get_resources( + struct platform_device *pdev); +int ahci_platform_init_host(struct platform_device *pdev, + struct ahci_host_priv *hpriv, + const struct ata_port_info *pi_template, + unsigned int force_port_map, + unsigned int mask_port_map); #endif /* _AHCI_PLATFORM_H */ -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html