Hi Hans, On Wed, Feb 19, 2014 at 01:01:59PM +0100, Hans de Goede wrote: > From: Oliver Schinagl <oliver@xxxxxxxxxxx> > > This patch adds sunxi sata support to A10 boards that have such a connector. > Some boards also feature a regulator via a GPIO and support for this is also > added. > > Signed-off-by: Olliver Schinagl <oliver@xxxxxxxxxxx> > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > arch/arm/boot/dts/sun4i-a10-a1000.dts | 4 ++++ > arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 6 +++++ > arch/arm/boot/dts/sun4i-a10.dtsi | 8 +++++++ > arch/arm/boot/dts/sunxi-ahci-reg.dtsi | 36 ++++++++++++++++++++++++++++++ > 4 files changed, 54 insertions(+) > create mode 100644 arch/arm/boot/dts/sunxi-ahci-reg.dtsi > > diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts > index cbd2e13..d6ec839 100644 > --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts > +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts > @@ -35,6 +35,10 @@ > }; > }; > > + ahci: sata@01c18000 { > + status = "okay"; > + }; > + > pinctrl@01c20800 { > emac_power_pin_a1000: emac_power_pin@0 { > allwinner,pins = "PH15"; > diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts > index b139ee6..6df237d8 100644 > --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts > +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts > @@ -12,6 +12,7 @@ > > /dts-v1/; > /include/ "sun4i-a10.dtsi" > +/include/ "sunxi-ahci-reg.dtsi" > > / { > model = "Cubietech Cubieboard"; > @@ -33,6 +34,11 @@ > }; > }; > > + ahci: sata@01c18000 { > + target-supply = <®_ahci_5v>; > + status = "okay"; > + }; > + > pinctrl@01c20800 { > led_pins_cubieboard: led_pins@0 { > allwinner,pins = "PH20", "PH21"; > diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi > index 336dbec..454077a 100644 > --- a/arch/arm/boot/dts/sun4i-a10.dtsi > +++ b/arch/arm/boot/dts/sun4i-a10.dtsi > @@ -338,6 +338,14 @@ > #size-cells = <0>; > }; > > + ahci: sata@01c18000 { > + compatible = "allwinner,sun4i-a10-ahci"; > + reg = <0x01c18000 0x1000>; > + interrupts = <56>; > + clocks = <&pll6 0>, <&ahb_gates 25>; > + status = "disabled"; > + }; > + > intc: interrupt-controller@01c20400 { > compatible = "allwinner,sun4i-ic"; > reg = <0x01c20400 0x400>; > diff --git a/arch/arm/boot/dts/sunxi-ahci-reg.dtsi b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi > new file mode 100644 > index 0000000..7072af1 > --- /dev/null > +++ b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi > @@ -0,0 +1,36 @@ > +/* > + * sunxi boards sata target power supply common code Since IIRC we have pretty much the same needs for the USB, can't we just drop the SATA specific mention and use it as the common DTSI for the usual regulators? Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
Attachment:
signature.asc
Description: Digital signature