When an error occurs in the port initialization loop, currently the driver tries to cleanup all the ports. This results in a NULL pointer dereference if the ports were only partially initialized. Fix this by updating only the number of initialized ports (either with failure or successfully), before jumping to the error path and looping over that number in the cleanup loop. Cc: Andrew Lunn <andrew@xxxxxxx> Reported-by: Mikael Pettersson <mikpelinux@xxxxxxxxx> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx> --- Andrew, feel free to rework the patch, fix the comments or anything else. This is just a quick proposal. drivers/ata/sata_mv.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 20a7517..9c1a11d 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4104,7 +4104,6 @@ static int mv_platform_probe(struct platform_device *pdev) if (!hpriv->port_phys) return -ENOMEM; host->private_data = hpriv; - hpriv->n_ports = n_ports; hpriv->board_idx = chip_soc; host->iomap = NULL; @@ -4132,11 +4131,17 @@ static int mv_platform_probe(struct platform_device *pdev) hpriv->port_phys[port] = NULL; if ((rc != -EPROBE_DEFER) && (rc != -ENODEV)) dev_warn(&pdev->dev, "error getting phy"); + + /* Cleanup only the initialized ports */ + hpriv->n_ports = port; goto err; } else phy_power_on(hpriv->port_phys[port]); } + /* All the ports have been initialized */ + hpriv->n_ports = n_ports; + /* * (Re-)program MBUS remapping windows if we are asked to. */ @@ -4174,7 +4179,7 @@ err: clk_disable_unprepare(hpriv->clk); clk_put(hpriv->clk); } - for (port = 0; port < n_ports; port++) { + for (port = 0; port < hpriv->n_ports; port++) { if (!IS_ERR(hpriv->port_clks[port])) { clk_disable_unprepare(hpriv->port_clks[port]); clk_put(hpriv->port_clks[port]); -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html