Hi Tejun, As it had being awhile, any issue with this version of the SATA drivers before I post the follow on errata patches? -Loc On Thu, Jan 16, 2014 at 8:11 AM, Loc Ho <lho@xxxxxxx> wrote: > This patch adds support for the APM X-Gene SoC SATA host controller. In > order for the host controller to work, the corresponding PHY driver > musts also be available. > > v10: > * Update binding documentation > > v9: > * Remove ACPI/EFI include files > * Remove the IO flush support, interrupt routine, and DTS resources > * Remove function xgene_rd, xgene_wr, and xgene_wr_flush > * Remove PMP support (function xgene_ahci_qc_issue, xgene_ahci_qc_prep, > xgene_ahci_qc_fill_rtf, xgene_ahci_softreset, and xgene_ahci_do_softreset) > * Rename function xgene_ahci_enable_phy to xgene_ahci_force_phy_rdy > * Clean up hardreset functions > * Require v7 of the PHY driver > > v8: > * Remove _ADDR from defines > * Remove define MSTAWAUX_COHERENT_BYPASS_SET and > STARAUX_COHERENT_BYPASS_SET and use direct coding > * Remove the un-necessary check for DTS boot with built in ACPI table > * Switch to use dma_set_mask_and_coherent for setting DMA mask > * Remove ACPI table matching code > * Update clock-names for sata01clk, sata23clk, and sata45clk > > v7: > * Update the clock code by toggle the clock > * Update the DTS clock mask values due to the clock spilt between host and > v5 of the PHY drivers > > v6: > * Update binding documentation > * Change select PHY_XGENE_SATA to PHY_XGENE > * Add ULL to constants > * Change indentation and comments > * Clean up the probe functions a bit more > * Remove xgene_ahci_remove function > * Add the flush register to DTS > * Remove the interrupt-parent from DTS > > v5: > * Sync up to v3 of the PHY driver > * Remove MSLIM wrapper functions > * Change the memory shutdown loop to use usleep_range > * Use devm_ioremap_resource instead devm_ioremap > * Remove suspend/resume functions as not needed > > v4: > * Remove the ID property in DT > * Remove the temporary PHY direct function call and use PHY function > * Change printk to pr_debug > * Move the IOB flush addresses into the DT > * Remove the parameters retrieval function as no longer needed > * Remove the header file as no longer needed > * Require v2 patch of the SATA PHY driver. Require slightly modification > in the Kconfig as it is moved to folder driver/phy and use Kconfig > PHY_XGENE_SATA instead SATA_XGENE_PHY. > > v3: > * Move out the SATA PHY to another driver > * Remove the clock-cells entry from DTS > * Remove debug wrapper > * Remove delay functions wrapper > * Clean up resource and IRQ query > * Remove query clock name > * Switch to use dma_set_mask/dma_coherent_mask > * Remove un-necessary devm_kfree > * Update GPL license header to v2 > * Spilt up function xgene_ahci_hardreset > * Spilt up function xgene_ahci_probe > * Remove all reference of CONFIG_ARCH_MSLIM > * Clean up chip revision code > > v2: > * Clean up file sata_xgene.c with Lindent and etc > * Clean up file sata_xgene_serdes.c with Lindent and etc > * Add description to each patch > > v1: > * inital version > > Signed-off-by: Loc Ho <lho@xxxxxxx> > Signed-off-by: Tuan Phan <tphan@xxxxxxx> > Signed-off-by: Suman Tripathi <stripathi@xxxxxxx> > --- > Loc Ho (4): > ata: Export required functions by APM X-Gene SATA driver > Documentation: Add documentation for APM X-Gene SoC SATA host > controller DTS binding > ata: Add APM X-Gene SoC SATA host controller driver > arm64: Add APM X-Gene SoC SATA host controller DTS entries > > .../devicetree/bindings/ata/apm-xgene.txt | 70 +++ > arch/arm64/boot/dts/apm-storm.dtsi | 75 +++ > drivers/ata/Kconfig | 8 + > drivers/ata/Makefile | 1 + > drivers/ata/ahci.h | 9 + > drivers/ata/libahci.c | 16 +- > drivers/ata/sata_xgene.c | 630 ++++++++++++++++++++ > 7 files changed, 803 insertions(+), 6 deletions(-) > create mode 100644 Documentation/devicetree/bindings/ata/apm-xgene.txt > create mode 100644 drivers/ata/sata_xgene.c > -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
