Hi,
On 01/05/2014 12:35 PM, Arnd Bergmann wrote:
On Sunday 05 January 2014, Hans de Goede wrote:
<snip>
+static int sunxi_ahci_phy_init(struct device *dev, void __iomem *reg_base)
+{
+ u32 reg_val;
+ int timeout;
+
+ /* This magic is from the original code */
+ writel(0, reg_base + AHCI_RWCR);
+ mdelay(5);
This function should probably be in a separate phy driver. I would
very much hope that we can minimize the required code in an AHCI
driver and move code from this new file into the ahci-platform
driver. The clock, regulator and phy setup can all be optional
properties of the generic driver, and then there shouldn't
be much left that is sunxi specific.
Writing a phy driver, and extending ahci-platform to use that
was my original plan. But the phy really is part of the
ahci ip-block here, and not a separate ip-block. Its registers
are smack in the middle of the io-range for the ahci function.
I see. I wonder if the register layout is common with some other
implementation then. If it's part of the AHCI block, it's probably
not an Allwinner invention but comes from whoever implemented the
AHCI.
Right, but so far we've been unable to find anything quite like it.
Also note that sunxi_ahci_pre_start_engine is rather sunxi
specific. Needing to put that in a generic ahci_platform driver
and only activating it for sunxi socs would only serve to
prove my point that at some point it is simply easier and
better to write a non generic platform glue driver when dealing
with exotic ahci ip blocks.
If we end up putting all sort of if soca do foo else if socb
do bar, else do nothing magic in ahci_platform.c I think we're
over generalizing. If something nicely fits as a generic
platform dev, by all means we should use a generic platform
driver, but that just won't work cleanly here.
Yes, but there may be some middle ground. I still think it would
be worthwhile to make the clock handling part of the common
ahci (or ahci-platform) driver and reuse that, since it seems
to be needed on a number of implementations. IIRC there is already
some inheritence model in libata that can be used to define
variations of drivers and have common parts done only once.
Ok, thinking more about this I think I have a solution which
should be acceptable. I'll do a v3 the coming days.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
