Some Marvell SoCs have a SATA PHY which can be powered off, in order
to save power. Make use of the generic phy framework to control these
phys.
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
---
v2->v3
Look for phys using name "port0", "port1", etc.
v3->v4
Warn when devm_phy_get() returns a fatal error.
hpriv->port_phys[port] contains NULL or phy, never error code.
---
drivers/ata/sata_mv.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 56be318..eaa21ed 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -60,6 +60,7 @@
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <linux/clk.h>
+#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mbus.h>
@@ -563,6 +564,12 @@ struct mv_host_priv {
struct clk *clk;
struct clk **port_clks;
/*
+ * Some devices have a SATA PHY which can be enabled/disabled
+ * in order to save power. These are optional: if the platform
+ * devices does not have any phy, they won't be used.
+ */
+ struct phy **port_phys;
+ /*
* These consistent DMA memory pools give us guaranteed
* alignment for hardware-accessed data structures,
* and less memory waste in accomplishing the alignment.
@@ -4076,6 +4083,11 @@ static int mv_platform_probe(struct platform_device *pdev)
GFP_KERNEL);
if (!hpriv->port_clks)
return -ENOMEM;
+ hpriv->port_phys = devm_kzalloc(&pdev->dev,
+ sizeof(struct phy *) * n_ports,
+ GFP_KERNEL);
+ if (!hpriv->port_phys)
+ return -ENOMEM;
host->private_data = hpriv;
hpriv->n_ports = n_ports;
hpriv->board_idx = chip_soc;
@@ -4097,6 +4109,17 @@ static int mv_platform_probe(struct platform_device *pdev)
hpriv->port_clks[port] = clk_get(&pdev->dev, port_number);
if (!IS_ERR(hpriv->port_clks[port]))
clk_prepare_enable(hpriv->port_clks[port]);
+
+ sprintf(port_number, "port%d", port);
+ hpriv->port_phys[port] = devm_phy_get(&pdev->dev, port_number);
+ if (IS_ERR(hpriv->port_phys[port])) {
+ rc = PTR_ERR(hpriv->port_phys[port]);
+ hpriv->port_phys[port] = NULL;
+ if ((rc != -EPROBE_DEFER) && (rc != -ENODEV))
+ dev_warn(&pdev->dev, "error getting phy");
+ goto err;
+ } else
+ phy_power_on(hpriv->port_phys[port]);
}
/*
@@ -4132,6 +4155,8 @@ err:
clk_disable_unprepare(hpriv->port_clks[port]);
clk_put(hpriv->port_clks[port]);
}
+ if (hpriv->port_phys[port])
+ phy_power_off(hpriv->port_phys[port]);
}
return rc;
@@ -4161,6 +4186,8 @@ static int mv_platform_remove(struct platform_device *pdev)
clk_disable_unprepare(hpriv->port_clks[port]);
clk_put(hpriv->port_clks[port]);
}
+ if (hpriv->port_phys[port])
+ phy_power_off(hpriv->port_phys[port]);
}
return 0;
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
