Re: [PATCH] ata: sata_mv: setting PHY speed according to SControl speed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 23, 2013 at 01:07:35PM +0100, Simon Guinot wrote:
> From: Lior Amsalem <alior@xxxxxxxxxxx>
> 
> From: Lior Amsalem <alior@xxxxxxxxxxx>
> 
> This patch fixes a SATA hotplug issue on the Armada 370 and Armada XP
> SoCs. Without it, if a disk is unplugged from a SATA port, then further
> hotplug notification are now longer received on this port.
> 
> This should be applied to every -stable kernel supporting Armada SoCs.

Could we get a little more specific here?  Please determine which commit
introduced the regression and note it with 'Fixes: <commitish> "oneline"'

It's really needed here since the sata_mv driver predates the Armada
SoCs introduction.  Is it possible Kirkwood et al also experience this
problem?

thx,

Jason.

> 
> Signed-off-by: Lior Amsalem <alior@xxxxxxxxxxx>
> Signed-off-by: Nadav Haklai <nadavh@xxxxxxxxxxx>
> Signed-off-by: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
> Cc: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
> Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
> Cc: Andrew Lunn <andrew@xxxxxxx>
> Cc: Gregory Clement <gregory.clement@xxxxxxxxxxxxxxxxxx>
> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> ---
>  drivers/ata/sata_mv.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
> index 56be318..89ca472 100644
> --- a/drivers/ata/sata_mv.c
> +++ b/drivers/ata/sata_mv.c
> @@ -304,6 +304,7 @@ enum {
>  	MV5_LTMODE		= 0x30,
>  	MV5_PHY_CTL		= 0x0C,
>  	SATA_IFCFG		= 0x050,
> +	LP_PHY_CTL		= 0x058,
>  
>  	MV_M2_PREAMP_MASK	= 0x7e0,
>  
> @@ -1358,6 +1359,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
>  
>  	if (ofs != 0xffffffffU) {
>  		void __iomem *addr = mv_ap_base(link->ap) + ofs;
> +		void __iomem *lp_phy_addr = mv_ap_base(link->ap) + LP_PHY_CTL;
>  		if (sc_reg_in == SCR_CONTROL) {
>  			/*
>  			 * Workaround for 88SX60x1 FEr SATA#26:
> @@ -1374,6 +1376,14 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
>  			 */
>  			if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1)
>  				val |= 0xf000;
> +
> +			/*
> +			 * Setting PHY speed according to SControl speed
> +			 */
> +			if ((val & 0xf0) == 0x10)
> +				writelfl(0x7, lp_phy_addr);
> +			else
> +				writelfl(0x227, lp_phy_addr);
>  		}
>  		writelfl(val, addr);
>  		return 0;
> -- 
> 1.8.5.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux