Hi, i have updated the bug-report. I re-tested with 3.11.1-200.fc19.x86_64, and the 'libata.atapi_passthru16=0' kernel boot parameter is still needed to avoid the system freeze. Please post a 'lsscsi' output. Also check if you can connect via ssh from another system and capture the kernel logs at the momment of the freeze. (either by using journalctl -f or doing a tail -f /var/log/messages). At the momment of the freeze, some error or message should be printed. Cheers. On Sat, Sep 28, 2013 at 9:20 AM, Wakko Warner <wakko@xxxxxxxxxxxx> wrote: > Reartes Guillermo wrote: >> I am not sure it is the exact same [model] card., but check my bugreport: >> >> https://bugzilla.redhat.com/show_bug.cgi?id=906532 >> Hard freezes with ASMedia SATA (1b21:0612) (PCIe) and Optical Drive >> (iHBS112) (WORKAROUND = 'libata.atapi_passthru16=0') > > I looked. Here's my controller: > 06:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA > Controller (rev 01) (prog-if 01 [AHCI 1.0]) > Subsystem: Super Micro Computer Inc Device 0805 > Flags: bus master, fast devsel, latency 0, IRQ 41 > I/O ports at d050 [size=8] > I/O ports at d040 [size=4] > I/O ports at d030 [size=8] > I/O ports at d020 [size=4] > I/O ports at d000 [size=32] > Memory at f0400000 (32-bit, non-prefetchable) [size=512] > Capabilities: <access denied> > Kernel driver in use: ahci > > What I found interesting was the fact that the PCI location (06:00.0) is the > same as yours. Mine is built on the motherboard. > > Did you wait to see if your system came responsive again? Did you receive > ATA errors in your kernel log? I unfortunately don't have the errors > written down and the system crashed before anything was logged. > > I'll try the atapi passthrough thing. > >> On Fri, Sep 27, 2013 at 8:13 PM, Wakko Warner <wakko@xxxxxxxxxxxx> wrote: >> > I am not on this list, please keep me in CC. >> > >> > I have a SuperMicro X10SAE with a 2 port ASM1061 controller. When a DVDRW >> > is plugged into the port and is accessed (ie udev rules), there will be some >> > errors, an ata reset then the system hangs. Keyboard is non-responsive >> > (lock key lights won't change). SYSRQ doesn't work. >> > >> > I tried both ports with the same result with 2 DVDRW drives (both same >> > model). >> > >> > I was able to use a hard disk attached to either port w/o problems. >> > >> > Kernel is vanilla 3.11.1 running on x86_64. >> > >> > -- >> > Microsoft has beaten Volkswagen's world record. Volkswagen only created 22 >> > million bugs. >> > -- >> > To unsubscribe from this list: send the line "unsubscribe linux-ide" in >> > the body of a message to majordomo@xxxxxxxxxxxxxxx >> > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > Microsoft has beaten Volkswagen's world record. Volkswagen only created 22 > million bugs. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html