From: Kishon Vijay Abraham I <kishon@xxxxxx> As this driver is no longer USB specific use generic clock names. [Roger Q] - Fix PLL_SD_SHIFT from 9 to 10 - As optclk and wkupclk may not be always required, don't bail out if they aren't available. Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- drivers/phy/phy-omap-pipe3.c | 71 +++++++++++++++++++++++------------------- 1 files changed, 39 insertions(+), 32 deletions(-) diff --git a/drivers/phy/phy-omap-pipe3.c b/drivers/phy/phy-omap-pipe3.c index 63de0f8..807ab8a 100644 --- a/drivers/phy/phy-omap-pipe3.c +++ b/drivers/phy/phy-omap-pipe3.c @@ -37,15 +37,15 @@ #define PLL_CONFIGURATION4 0x00000020 #define PLL_REGM_MASK 0x001FFE00 -#define PLL_REGM_SHIFT 0x9 +#define PLL_REGM_SHIFT 9 #define PLL_REGM_F_MASK 0x0003FFFF -#define PLL_REGM_F_SHIFT 0x0 +#define PLL_REGM_F_SHIFT 0 #define PLL_REGN_MASK 0x000001FE -#define PLL_REGN_SHIFT 0x1 +#define PLL_REGN_SHIFT 1 #define PLL_SELFREQDCO_MASK 0x0000000E -#define PLL_SELFREQDCO_SHIFT 0x1 +#define PLL_SELFREQDCO_SHIFT 1 #define PLL_SD_MASK 0x0003FC00 -#define PLL_SD_SHIFT 0x9 +#define PLL_SD_SHIFT 10 #define SET_PLL_GO 0x1 #define PLL_TICOPWDN 0x10000 #define PLL_LOCK 0x2 @@ -232,23 +232,21 @@ static int omap_pipe3_probe(struct platform_device *pdev) phy->dev = &pdev->dev; - phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); - if (IS_ERR(phy->wkupclk)) { - dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); - return PTR_ERR(phy->wkupclk); - } - clk_prepare(phy->wkupclk); + phy->wkupclk = devm_clk_get(phy->dev, "wkupclk"); + if (IS_ERR(phy->wkupclk)) + dev_dbg(&pdev->dev, "unable to get wkupclk\n"); + else + clk_prepare(phy->wkupclk); - phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); - if (IS_ERR(phy->optclk)) { - dev_err(&pdev->dev, "unable to get usb_otg_ss_refclk960m\n"); - return PTR_ERR(phy->optclk); - } - clk_prepare(phy->optclk); + phy->optclk = devm_clk_get(phy->dev, "optclk"); + if (IS_ERR(phy->optclk)) + dev_dbg(&pdev->dev, "unable to get optclk\n"); + else + clk_prepare(phy->optclk); - phy->sys_clk = devm_clk_get(phy->dev, "sys_clkin"); + phy->sys_clk = devm_clk_get(phy->dev, "sysclk"); if (IS_ERR(phy->sys_clk)) { - pr_err("%s: unable to get sys_clkin\n", __func__); + dev_err(&pdev->dev, "unable to get sysclk\n"); return -EINVAL; } @@ -290,8 +288,10 @@ static int omap_pipe3_remove(struct platform_device *pdev) { struct omap_pipe3 *phy = platform_get_drvdata(pdev); - clk_unprepare(phy->wkupclk); - clk_unprepare(phy->optclk); + if (!IS_ERR(phy->wkupclk)) + clk_unprepare(phy->wkupclk); + if (!IS_ERR(phy->optclk)) + clk_unprepare(phy->optclk); if (!pm_runtime_suspended(&pdev->dev)) pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -305,8 +305,10 @@ static int omap_pipe3_runtime_suspend(struct device *dev) { struct omap_pipe3 *phy = dev_get_drvdata(dev); - clk_disable(phy->wkupclk); - clk_disable(phy->optclk); + if (!IS_ERR(phy->wkupclk)) + clk_disable(phy->wkupclk); + if (!IS_ERR(phy->optclk)) + clk_disable(phy->optclk); return 0; } @@ -316,22 +318,27 @@ static int omap_pipe3_runtime_resume(struct device *dev) u32 ret = 0; struct omap_pipe3 *phy = dev_get_drvdata(dev); - ret = clk_enable(phy->optclk); - if (ret) { - dev_err(phy->dev, "Failed to enable optclk %d\n", ret); - goto err1; + if (!IS_ERR(phy->optclk)) { + ret = clk_enable(phy->optclk); + if (ret) { + dev_err(phy->dev, "Failed to enable optclk %d\n", ret); + goto err1; + } } - ret = clk_enable(phy->wkupclk); - if (ret) { - dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); - goto err2; + if (!IS_ERR(phy->wkupclk)) { + ret = clk_enable(phy->wkupclk); + if (ret) { + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + goto err2; + } } return 0; err2: - clk_disable(phy->optclk); + if (!IS_ERR(phy->optclk)) + clk_disable(phy->optclk); err1: return ret; -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html