On Thursday 12 September 2013 23:01:29 Ondrej Zary wrote:
> The test for 2nd I/O port validity is broken (reversed):
> On devices with no control port, the driver attempts to use invalid port 0,
> resulting in logs full of bad_io_access errors.
> On devices with control port, the driver does not use it.
>
> Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
> ---
> drivers/ata/pata_isapnp.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
> index 4bceb88..b33d1f9 100644
> --- a/drivers/ata/pata_isapnp.c
> +++ b/drivers/ata/pata_isapnp.c
> @@ -78,7 +78,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const
> struct pnp_device_id *dev
>
> ap->ioaddr.cmd_addr = cmd_addr;
>
> - if (pnp_port_valid(idev, 1) == 0) {
> + if (pnp_port_valid(idev, 1)) {
> ctl_addr = devm_ioport_map(&idev->dev,
> pnp_port_start(idev, 1), 1);
> ap->ioaddr.altstatus_addr = ctl_addr;
With this patch, the ATA port works fine if there is a device connected to it.
However, it takes ages to boot if there are no devices connected. Looks like
the driver retries IDENTIFY command for both slave and master drives in a
hope that the devices are there.
log:
[ 7.692344] pata_isapnp 01:01.02: [io 0x01e8-0x01ef]
[ 7.692474] pata_isapnp 01:01.02: [io 0x0168-0x016f]
[ 7.692644] pata_isapnp 01:01.02: [irq 10]
[ 7.695012] pata_isapnp 01:01.02: activated
[ 7.751153] scsi2 : pata_isapnp
[ 7.751781] ata3: PATA max PIO0 cmd 0x168 ctl 0x0 irq 10
[ 12.751446] ata3.01: qc timeout (cmd 0xec)
[ 12.751571] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 22.752270] ata3.01: qc timeout (cmd 0xec)
[ 22.752396] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 52.754737] ata3.01: qc timeout (cmd 0xec)
[ 52.754861] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 57.755149] ata3.00: qc timeout (cmd 0xec)
[ 57.755275] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 67.755974] ata3.00: qc timeout (cmd 0xec)
[ 67.756099] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
