I'm using old notebook (coming from about 2008) and recently
experienced my first problem with the harddrive. There is one file I
can not fully read. It's size is 4.4GB, but after copying 3.4GB I get
that errors in dmesg and copying hangs.
This is the only case where I experience this issue. As long as I
don't touch that problematic file I don't see any problems/errors.
Is this possible some part of the file was saved on a bad block of my
hard drive? Can this mean some problem with the driver scanning for
the bad blocks? Or could that be just an accident that block became a
bad one after using it (when it was OK)?
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
ata1.00: qc timeout (cmd 0x2f)
ata1: failed to read log page 10h (errno=-5)
ata1.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x6 frozen
(... see dmesg.txt)
--
Rafał
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93)
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility Radeon HD 3400 Series [1002:95c4]
01:00.1 Audio device [0403]: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series] [1002:aa28]
06:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
08:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 13)
0a:03.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
0a:03.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
0a:03.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
[239513.824499] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[240818.179054] ata1.00: qc timeout (cmd 0x2f)
[240818.179069] ata1: failed to read log page 10h (errno=-5)
[240818.179073] ata1.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x6 frozen
[240818.179075] ata1.00: irq_stat 0x40000008
[240818.179078] ata1.00: failed command: READ FPDMA QUEUED
[240818.179084] ata1.00: cmd 60/00:00:1f:ba:e2/02:00:22:00:00/40 tag 0 ncq 262144 in
[240818.179084] res 40/00:08:1f:b8:e2/00:00:22:00:00/40 Emask 0x1 (device error)
[240818.179086] ata1.00: status: { DRDY }
[240818.179089] ata1.00: failed command: READ FPDMA QUEUED
[240818.179093] ata1.00: cmd 60/00:08:1f:b8:e2/02:00:22:00:00/40 tag 1 ncq 262144 in
[240818.179093] res 40/00:08:1f:b8:e2/00:00:22:00:00/40 Emask 0x1 (device error)
[240818.179096] ata1.00: status: { DRDY }
[240818.179101] ata1: hard resetting link
[240818.485124] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[240818.485692] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[240818.486611] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[240818.486852] ata1.00: configured for UDMA/100
[240818.497080] sd 0:0:0:0: [sda]
[240818.497083] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[240818.497086] sd 0:0:0:0: [sda]
[240818.497087] Sense Key : Aborted Command [current] [descriptor]
[240818.497091] Descriptor sense data with sense descriptors (in hex):
[240818.497093] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[240818.497102] 22 e2 b8 1f
[240818.497107] sd 0:0:0:0: [sda]
[240818.497109] Add. Sense: No additional sense information
[240818.497112] sd 0:0:0:0: [sda] CDB:
[240818.497113] Read(10): 28 00 22 e2 ba 1f 00 02 00 00
[240818.497122] end_request: I/O error, dev sda, sector 585284127
[240818.497150] sd 0:0:0:0: [sda]
[240818.497152] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[240818.497154] sd 0:0:0:0: [sda]
[240818.497155] Sense Key : Aborted Command [current] [descriptor]
[240818.497158] Descriptor sense data with sense descriptors (in hex):
[240818.497159] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[240818.497169] 22 e2 b8 1f
[240818.497173] sd 0:0:0:0: [sda]
[240818.497175] Add. Sense: No additional sense information
[240818.497178] sd 0:0:0:0: [sda] CDB:
[240818.497179] Read(10): 28 00 22 e2 b8 1f 00 02 00 00
[240818.497187] end_request: I/O error, dev sda, sector 585283615
[240818.497210] ata1: EH complete
[240824.554304] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
[240824.554308] ata1.00: irq_stat 0x40000008
[240824.554311] ata1.00: failed command: READ FPDMA QUEUED
[240824.554317] ata1.00: cmd 60/08:00:cf:b8:e2/00:00:22:00:00/40 tag 0 ncq 4096 in
[240824.554317] res 41/40:08:0d:78:52/00:00:03:00:00/40 Emask 0x409 (media error) <F>
[240824.554320] ata1.00: status: { DRDY ERR }
[240824.554321] ata1.00: error: { UNC }
[240824.556468] ata1.00: configured for UDMA/100
[240824.556481] sd 0:0:0:0: [sda] Unhandled sense code
[240824.556483] sd 0:0:0:0: [sda]
[240824.556485] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[240824.556487] sd 0:0:0:0: [sda]
[240824.556489] Sense Key : Medium Error [current] [descriptor]
[240824.556492] Descriptor sense data with sense descriptors (in hex):
[240824.556494] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[240824.556504] 03 52 78 0d
[240824.556508] sd 0:0:0:0: [sda]
[240824.556511] Add. Sense: Unrecovered read error - auto reallocate failed
[240824.556514] sd 0:0:0:0: [sda] CDB:
[240824.556516] Read(10): 28 00 22 e2 b8 cf 00 00 08 00
[240824.556525] end_request: I/O error, dev sda, sector 585283791
[240824.556545] ata1: EH complete
[240830.617985] ata1.00: exception Emask 0x0 SAct 0x40 SErr 0x0 action 0x0
[240830.617989] ata1.00: irq_stat 0x40000008
[240830.617992] ata1.00: failed command: READ FPDMA QUEUED
[240830.617998] ata1.00: cmd 60/08:30:cf:b8:e2/00:00:22:00:00/40 tag 6 ncq 4096 in
[240830.617998] res 41/40:30:cf:b8:e2/00:00:22:00:00/40 Emask 0x409 (media error) <F>
[240830.618015] ata1.00: status: { DRDY ERR }
[240830.618017] ata1.00: error: { UNC }
[240830.620035] ata1.00: configured for UDMA/100
[240830.620053] sd 0:0:0:0: [sda] Unhandled sense code
[240830.620056] sd 0:0:0:0: [sda]
[240830.620058] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[240830.620060] sd 0:0:0:0: [sda]
[240830.620061] Sense Key : Medium Error [current] [descriptor]
[240830.620065] Descriptor sense data with sense descriptors (in hex):
[240830.620067] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[240830.620077] 22 e2 b8 cf
[240830.620081] sd 0:0:0:0: [sda]
[240830.620085] Add. Sense: Unrecovered read error - auto reallocate failed
[240830.620088] sd 0:0:0:0: [sda] CDB:
[240830.620089] Read(10): 28 00 22 e2 b8 cf 00 00 08 00
[240830.620098] end_request: I/O error, dev sda, sector 585283791
[240830.620122] ata1: EH complete
