Hi, Missed to include Ben, for I2C patch, including him and copying others. Thanks, Vasanth. On Tue, Oct 30, 2012 at 9:31 PM, Vasanth Ananthan <vasanthananthan@xxxxxxxxx> wrote: > This patch adds a platform driver for SATA controller. > > Signed-off-by: Vasanth Ananthan <vasanth.a@xxxxxxxxxxx> > --- > arch/arm/mach-exynos/include/mach/regs-pmu.h | 3 + > drivers/ata/Kconfig | 12 ++ > drivers/ata/Makefile | 1 + > drivers/ata/sata_exynos.c | 268 ++++++++++++++++++++++++++ > 4 files changed, 284 insertions(+), 0 deletions(-) > create mode 100644 drivers/ata/sata_exynos.c > > diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h > index d4e392b..3716ce8 100644 > --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h > +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h > @@ -367,4 +367,7 @@ > > #define EXYNOS5_OPTION_USE_RETENTION (1 << 4) > > +/* Only for EXYNOS5250 */ > +#define EXYNOS5_SATA_PHY_CONTROL S5P_PMUREG(0x0724) > + > #endif /* __ASM_ARCH_REGS_PMU_H */ > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig > index e3a2972..f3384ed 100644 > --- a/drivers/ata/Kconfig > +++ b/drivers/ata/Kconfig > @@ -93,6 +93,18 @@ config SATA_PHY > with the framework through the APIs provided and the SATA > device finds and requests for an appropriate PHY device. > > +config SATA_EXYNOS > + bool "Exynos SATA AHCI support" > + select I2C > + select HAVE_S3C2410_I2C > + select I2C_S3C2410 > + select SATA_PHY > + help > + This option enables support for Exynos AHCI Serial ATA > + controllers. > + > + If unsure, say N. > + > config SATA_FSL > tristate "Freescale 3.0Gbps SATA support" > depends on FSL_SOC > diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile > index 3d219a9..43bb38e 100644 > --- a/drivers/ata/Makefile > +++ b/drivers/ata/Makefile > @@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o > obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o > obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o > obj-$(CONFIG_SATA_PHY) += sata_phy.o > +obj-$(CONFIG_SATA_EXYNOS) += sata_exynos.o libahci.o > > # SFF w/ custom DMA > obj-$(CONFIG_PDC_ADMA) += pdc_adma.o > diff --git a/drivers/ata/sata_exynos.c b/drivers/ata/sata_exynos.c > new file mode 100644 > index 0000000..41dc17d > --- /dev/null > +++ b/drivers/ata/sata_exynos.c > @@ -0,0 +1,268 @@ > +/* > + * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * EXYNOS - SATA controller driver > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/kernel.h> > +#include <linux/gfp.h> > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/interrupt.h> > +#include <linux/device.h> > +#include <linux/platform_device.h> > +#include <linux/libata.h> > +#include <linux/ahci_platform.h> > +#include <linux/clk.h> > +#include <linux/slab.h> > +#include <linux/of.h> > + > +#include "ahci.h" > +#include "sata_phy.h" > + > +#define MHZ (1000 * 1000) > + > +static const struct ata_port_info ahci_port_info = { > + .flags = AHCI_FLAG_COMMON, > + .pio_mask = ATA_PIO4, > + .udma_mask = ATA_UDMA6, > + .port_ops = &ahci_ops, > +}; > + > +static struct scsi_host_template ahci_platform_sht = { > + AHCI_SHT("ahci_platform"), > +}; > + > +struct exynos_sata { > + struct clk *sclk; > + struct clk *clk; > + struct sata_phy *phy; > + int irq; > + unsigned int freq; > +}; > + > +static void exynos_sata_parse_dt(struct device_node *np, > + struct exynos_sata *sata) > +{ > + if (!np) > + return; > + > + of_property_read_u32(np, "samsung,sata-freq", &sata->freq); > +} > + > +static int __init exynos_sata_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct ata_port_info pi = ahci_port_info; > + const struct ata_port_info *ppi[] = { &pi, NULL }; > + struct ahci_host_priv *hpriv; > + struct exynos_sata *sata; > + struct ata_host *host; > + struct resource *mem; > + int n_ports, i, ret; > + > + sata = devm_kzalloc(dev, sizeof(*sata), GFP_KERNEL); > + if (!sata) { > + dev_err(dev, "can't alloc sata\n"); > + return -EINVAL; > + } > + > + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); > + if (!hpriv) { > + dev_err(dev, "can't alloc ahci_host_priv\n"); > + ret = -ENOMEM; > + goto err1; > + } > + > + hpriv->flags |= (unsigned long)pi.private_data; > + > + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!mem) { > + dev_err(dev, "no mmio space\n"); > + ret = -EINVAL; > + goto err2; > + } > + > + sata->irq = platform_get_irq(pdev, 0); > + if (sata->irq <= 0) { > + dev_err(dev, "no irq\n"); > + ret = -EINVAL; > + goto err2; > + } > + > + hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); > + if (!hpriv->mmio) { > + dev_err(dev, "can't map %pR\n", mem); > + ret = -ENOMEM; > + goto err2; > + } > + > + exynos_sata_parse_dt(dev->of_node, sata); > + > + sata->sclk = devm_clk_get(dev, "sclk_sata"); > + if (IS_ERR(sata->sclk)) { > + dev_err(dev, "failed to get sclk_sata\n"); > + ret = PTR_ERR(sata->sclk); > + goto err3; > + } > + clk_enable(sata->sclk); > + > + clk_set_rate(sata->sclk, sata->freq * MHZ); > + > + sata->clk = devm_clk_get(dev, "sata"); > + if (IS_ERR(sata->clk)) { > + dev_err(dev, "failed to get sata clock\n"); > + ret = PTR_ERR(sata->clk); > + goto err4; > + } > + clk_enable(sata->clk); > + > + /* Get a gen 3 PHY controller */ > + > + sata->phy = sata_get_phy(SATA_PHY_GENERATION3); > + if (!sata->phy) { > + dev_err(dev, "failed to get sata phy\n"); > + ret = -EPROBE_DEFER; > + goto err5; > + } > + > + /* Initialize the controller */ > + > + ret = sata_init_phy(sata->phy); > + if (ret < 0) { > + dev_err(dev, "failed to initialize sata phy\n"); > + goto err6; > + } > + > + ahci_save_initial_config(dev, hpriv, 0, 0); > + > + /* prepare host */ > + if (hpriv->cap & HOST_CAP_NCQ) > + pi.flags |= ATA_FLAG_NCQ; > + > + if (hpriv->cap & HOST_CAP_PMP) > + pi.flags |= ATA_FLAG_PMP; > + > + ahci_set_em_messages(hpriv, &pi); > + > + /* CAP.NP sometimes indicate the index of the last enabled > + * port, at other times, that of the last possible port, so > + * determining the maximum port number requires looking at > + * both CAP.NP and port_map. > + */ > + n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); > + > + host = ata_host_alloc_pinfo(dev, ppi, n_ports); > + if (!host) { > + ret = -ENOMEM; > + goto err7; > + } > + > + host->private_data = hpriv; > + > + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) > + host->flags |= ATA_HOST_PARALLEL_SCAN; > + else > + pr_info(KERN_INFO > + "ahci: SSS flag set, parallel bus scan disabled\n"); > + > + if (pi.flags & ATA_FLAG_EM) > + ahci_reset_em(host); > + > + for (i = 0; i < host->n_ports; i++) { > + struct ata_port *ap = host->ports[i]; > + > + ata_port_desc(ap, "mmio %pR", mem); > + ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); > + > + /* set enclosure management message type */ > + if (ap->flags & ATA_FLAG_EM) > + ap->em_message_type = hpriv->em_msg_type; > + > + /* disabled/not-implemented port */ > + if (!(hpriv->port_map & (1 << i))) > + ap->ops = &ata_dummy_port_ops; > + } > + > + ret = ahci_reset_controller(host); > + if (ret) > + goto err7; > + > + ahci_init_controller(host); > + ahci_print_info(host, "platform"); > + > + ret = ata_host_activate(host, sata->irq, ahci_interrupt, IRQF_SHARED, > + &ahci_platform_sht); > + if (ret) > + goto err7; > + > + platform_set_drvdata(pdev, sata); > + > + return 0; > + > + err7: > + sata_shutdown_phy(sata->phy); > + > + err6: > + sata_put_phy(sata->phy); > + > + err5: > + clk_disable(sata->clk); > + devm_clk_put(dev, sata->clk); > + > + err4: > + clk_disable(sata->sclk); > + devm_clk_put(dev, sata->sclk); > + > + err3: > + devm_iounmap(dev, hpriv->mmio); > + > + err2: > + devm_kfree(dev, hpriv); > + > + err1: > + devm_kfree(dev, sata); > + > + return ret; > +} > + > +static int __devexit exynos_sata_remove(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct ata_host *host = dev_get_drvdata(dev); > + struct exynos_sata *sata = platform_get_drvdata(pdev); > + > + ata_host_detach(host); > + > + sata_shutdown_phy(sata->phy); > + sata_put_phy(sata->phy); > + > + return 0; > +} > + > +static const struct of_device_id ahci_of_match[] = { > + { .compatible = "samsung,exynos5-sata-ahci", }, > +}; > + > +MODULE_DEVICE_TABLE(of, ahci_of_match); > + > +static struct platform_driver exynos_sata_driver = { > + .probe = exynos_sata_probe, > + .remove = exynos_sata_remove, > + .driver = { > + .name = "ahci-sata", > + .owner = THIS_MODULE, > + .of_match_table = ahci_of_match, > + }, > +}; > + > +module_platform_driver(exynos_sata_driver); > + > +MODULE_DESCRIPTION("EXYNOS SATA DRIVER"); > +MODULE_AUTHOR("Vasanth Ananthan, <vasanth.a@xxxxxxxxxxx>"); > +MODULE_LICENSE("GPL"); > -- > 1.7.4.1 > -- Regards, Vasanth K A -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
