[PATCH v2 5/6] DRIVERS: ATA: SATA controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds a platform driver for SATA controller.

Signed-off-by: Vasanth Ananthan <vasanth.a@xxxxxxxxxxx>
---
 arch/arm/mach-exynos/include/mach/regs-pmu.h |    3 +
 drivers/ata/Kconfig                          |   12 ++
 drivers/ata/Makefile                         |    1 +
 drivers/ata/sata_exynos.c                    |  268 ++++++++++++++++++++++++++
 4 files changed, 284 insertions(+), 0 deletions(-)
 create mode 100644 drivers/ata/sata_exynos.c

diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index d4e392b..3716ce8 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -367,4 +367,7 @@
 
 #define EXYNOS5_OPTION_USE_RETENTION				(1 << 4)
 
+/* Only for EXYNOS5250 */
+#define EXYNOS5_SATA_PHY_CONTROL		S5P_PMUREG(0x0724)
+
 #endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index e3a2972..f3384ed 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -93,6 +93,18 @@ config SATA_PHY
 	  with the framework through the APIs provided and the SATA
 	  device finds and requests for an appropriate PHY device.
 
+config SATA_EXYNOS
+        bool "Exynos SATA AHCI support"
+        select I2C
+        select HAVE_S3C2410_I2C
+        select I2C_S3C2410
+        select SATA_PHY
+        help
+          This option enables support for Exynos AHCI Serial ATA
+          controllers.
+
+          If unsure, say N.
+
 config SATA_FSL
 	tristate "Freescale 3.0Gbps SATA support"
 	depends on FSL_SOC
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 3d219a9..43bb38e 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
 obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
 obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
 obj-$(CONFIG_SATA_PHY)		+= sata_phy.o
+obj-$(CONFIG_SATA_EXYNOS)	+= sata_exynos.o libahci.o
 
 # SFF w/ custom DMA
 obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
diff --git a/drivers/ata/sata_exynos.c b/drivers/ata/sata_exynos.c
new file mode 100644
index 0000000..41dc17d
--- /dev/null
+++ b/drivers/ata/sata_exynos.c
@@ -0,0 +1,268 @@
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * EXYNOS - SATA controller driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include "ahci.h"
+#include "sata_phy.h"
+
+#define MHZ            (1000 * 1000)
+
+static const struct ata_port_info ahci_port_info = {
+	.flags = AHCI_FLAG_COMMON,
+	.pio_mask = ATA_PIO4,
+	.udma_mask = ATA_UDMA6,
+	.port_ops = &ahci_ops,
+};
+
+static struct scsi_host_template ahci_platform_sht = {
+	AHCI_SHT("ahci_platform"),
+};
+
+struct exynos_sata {
+	struct clk *sclk;
+	struct clk *clk;
+	struct sata_phy *phy;
+	int irq;
+	unsigned int freq;
+};
+
+static void exynos_sata_parse_dt(struct device_node *np,
+					struct exynos_sata *sata)
+{
+	if (!np)
+		return;
+
+	of_property_read_u32(np, "samsung,sata-freq", &sata->freq);
+}
+
+static int __init exynos_sata_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ata_port_info pi = ahci_port_info;
+	const struct ata_port_info *ppi[] = { &pi, NULL };
+	struct ahci_host_priv *hpriv;
+	struct exynos_sata *sata;
+	struct ata_host *host;
+	struct resource *mem;
+	int n_ports, i, ret;
+
+	sata = devm_kzalloc(dev, sizeof(*sata), GFP_KERNEL);
+	if (!sata) {
+		dev_err(dev, "can't alloc sata\n");
+		return -EINVAL;
+	}
+
+	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+	if (!hpriv) {
+		dev_err(dev, "can't alloc ahci_host_priv\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	hpriv->flags |= (unsigned long)pi.private_data;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(dev, "no mmio space\n");
+		ret = -EINVAL;
+		goto err2;
+	}
+
+	sata->irq = platform_get_irq(pdev, 0);
+	if (sata->irq <= 0) {
+		dev_err(dev, "no irq\n");
+		ret = -EINVAL;
+		goto err2;
+	}
+
+	hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
+	if (!hpriv->mmio) {
+		dev_err(dev, "can't map %pR\n", mem);
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	exynos_sata_parse_dt(dev->of_node, sata);
+
+	sata->sclk = devm_clk_get(dev, "sclk_sata");
+	if (IS_ERR(sata->sclk)) {
+		dev_err(dev, "failed to get sclk_sata\n");
+		ret = PTR_ERR(sata->sclk);
+		goto err3;
+	}
+	clk_enable(sata->sclk);
+
+	clk_set_rate(sata->sclk, sata->freq * MHZ);
+
+	sata->clk = devm_clk_get(dev, "sata");
+	if (IS_ERR(sata->clk)) {
+		dev_err(dev, "failed to get sata clock\n");
+		ret = PTR_ERR(sata->clk);
+		goto err4;
+	}
+	clk_enable(sata->clk);
+
+	/*  Get a gen 3 PHY controller */
+
+	sata->phy = sata_get_phy(SATA_PHY_GENERATION3);
+	if (!sata->phy) {
+		dev_err(dev, "failed to get sata phy\n");
+		ret = -EPROBE_DEFER;
+		goto err5;
+	}
+
+	/* Initialize the controller */
+
+	ret = sata_init_phy(sata->phy);
+	if (ret < 0) {
+		dev_err(dev, "failed to initialize sata phy\n");
+		goto err6;
+	}
+
+	ahci_save_initial_config(dev, hpriv, 0, 0);
+
+	/* prepare host */
+	if (hpriv->cap & HOST_CAP_NCQ)
+		pi.flags |= ATA_FLAG_NCQ;
+
+	if (hpriv->cap & HOST_CAP_PMP)
+		pi.flags |= ATA_FLAG_PMP;
+
+	ahci_set_em_messages(hpriv, &pi);
+
+	/* CAP.NP sometimes indicate the index of the last enabled
+	 * port, at other times, that of the last possible port, so
+	 * determining the maximum port number requires looking at
+	 * both CAP.NP and port_map.
+	 */
+	n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+	host = ata_host_alloc_pinfo(dev, ppi, n_ports);
+	if (!host) {
+		ret = -ENOMEM;
+		goto err7;
+	}
+
+	host->private_data = hpriv;
+
+	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+		host->flags |= ATA_HOST_PARALLEL_SCAN;
+	else
+		pr_info(KERN_INFO
+		       "ahci: SSS flag set, parallel bus scan disabled\n");
+
+	if (pi.flags & ATA_FLAG_EM)
+		ahci_reset_em(host);
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		ata_port_desc(ap, "mmio %pR", mem);
+		ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
+
+		/* set enclosure management message type */
+		if (ap->flags & ATA_FLAG_EM)
+			ap->em_message_type = hpriv->em_msg_type;
+
+		/* disabled/not-implemented port */
+		if (!(hpriv->port_map & (1 << i)))
+			ap->ops = &ata_dummy_port_ops;
+	}
+
+	ret = ahci_reset_controller(host);
+	if (ret)
+		goto err7;
+
+	ahci_init_controller(host);
+	ahci_print_info(host, "platform");
+
+	ret = ata_host_activate(host, sata->irq, ahci_interrupt, IRQF_SHARED,
+				&ahci_platform_sht);
+	if (ret)
+		goto err7;
+
+	platform_set_drvdata(pdev, sata);
+
+	return 0;
+
+ err7:
+	sata_shutdown_phy(sata->phy);
+
+ err6:
+	sata_put_phy(sata->phy);
+
+ err5:
+	clk_disable(sata->clk);
+	devm_clk_put(dev, sata->clk);
+
+ err4:
+	clk_disable(sata->sclk);
+	devm_clk_put(dev, sata->sclk);
+
+ err3:
+	devm_iounmap(dev, hpriv->mmio);
+
+ err2:
+	devm_kfree(dev, hpriv);
+
+ err1:
+	devm_kfree(dev, sata);
+
+	return ret;
+}
+
+static int __devexit exynos_sata_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct exynos_sata *sata = platform_get_drvdata(pdev);
+
+	ata_host_detach(host);
+
+	sata_shutdown_phy(sata->phy);
+	sata_put_phy(sata->phy);
+
+	return 0;
+}
+
+static const struct of_device_id ahci_of_match[] = {
+	{ .compatible = "samsung,exynos5-sata-ahci", },
+};
+
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
+static struct platform_driver exynos_sata_driver = {
+	.probe	= exynos_sata_probe,
+	.remove = exynos_sata_remove,
+	.driver = {
+		.name = "ahci-sata",
+		.owner = THIS_MODULE,
+		.of_match_table = ahci_of_match,
+	},
+};
+
+module_platform_driver(exynos_sata_driver);
+
+MODULE_DESCRIPTION("EXYNOS SATA DRIVER");
+MODULE_AUTHOR("Vasanth Ananthan, <vasanth.a@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux