On Thursday, March 29, 2012 1:19 AM, Rafal Prylowski wrote: > Signed-off-by: Rafal Prylowski <prylowski@xxxxxxxxxxx> > Cc: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> > Cc: Ryan Mallon <ryan@xxxxxxxxxxxxxxxx> > > --- > arch/arm/mach-ep93xx/core.c | 36 +++++++++++++++++ > arch/arm/mach-ep93xx/include/mach/platform.h | 1 > arch/arm/mach-ep93xx/soc.h | 1 > 3 files changed, 38 insertions(+) > > Index: linux-2.6/arch/arm/mach-ep93xx/soc.h > =================================================================== > --- linux-2.6.orig/arch/arm/mach-ep93xx/soc.h > +++ linux-2.6/arch/arm/mach-ep93xx/soc.h > @@ -69,6 +69,7 @@ > > #define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) > > +#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000) > #define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) > > #define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) > Index: linux-2.6/arch/arm/mach-ep93xx/core.c > =================================================================== > --- linux-2.6.orig/arch/arm/mach-ep93xx/core.c > +++ linux-2.6/arch/arm/mach-ep93xx/core.c > @@ -868,6 +868,42 @@ static struct platform_device ep93xx_wdt > .resource = ep93xx_wdt_resources, > }; > > +/************************************************************************* > + * EP93xx IDE > + *************************************************************************/ > +static struct resource ep93xx_ide_resources[] = { > + [0] = { > + .start = EP93XX_IDE_PHYS_BASE, > + .end = EP93XX_IDE_PHYS_BASE + 0xffff, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > + .start = IRQ_EP93XX_EXT3, > + .end = IRQ_EP93XX_EXT3, > + .flags = IORESOURCE_IRQ, > + }, > +}; Please use the DEFINE_RES_* macros. Also, the last register in the IDE interface is at offset 0x34, so something like this: static struct resource ep93xx_ide_resources[] = { DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38), DEFINE_RES_IRQ(IRQ_EP93XX_EXT3), }; > +static struct platform_device ep93xx_ide_device = { > + .name = "ep93xx-ide", > + .id = -1, > + .dev = { > + .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask, > + .coherent_dma_mask = DMA_BIT_MASK(32), > + }, > + .num_resources = ARRAY_SIZE(ep93xx_ide_resources), > + .resource = ep93xx_ide_resources, > +}; > + > +void __init ep93xx_register_ide(void) > +{ > + /* GPIO ports E, G and H used by IDE */ > + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE | > + EP93XX_SYSCON_DEVCFG_GONIDE | > + EP93XX_SYSCON_DEVCFG_HONIDE); > + platform_device_register(&ep93xx_ide_device); > +} Please create ep93xx_ide_acquire_gpio and ep93xx_ide_acquire_gpio functions to set/clear the necessary SYSCON bits during the probe/remove of the ide driver. This should also address your concern mentioned in PATCH 0/3 about making sure the pin muxing is correct when the driver is loaded. The *_acquire_gpio function should also gpio_request the pins before setting the SYSCON bits. That way if any of the pins are unavailable the driver will not load. Make sure to gpio_free the pins in the *_release_gpio function. Look at how the keypad is handled for an example. > + > void __init ep93xx_init_devices(void) > { > /* Disallow access to MaverickCrunch initially */ > Index: linux-2.6/arch/arm/mach-ep93xx/include/mach/platform.h > =================================================================== > --- linux-2.6.orig/arch/arm/mach-ep93xx/include/mach/platform.h > +++ linux-2.6/arch/arm/mach-ep93xx/include/mach/platform.h > @@ -48,6 +48,7 @@ void ep93xx_register_i2s(void); > int ep93xx_i2s_acquire(void); > void ep93xx_i2s_release(void); > void ep93xx_register_ac97(void); > +void ep93xx_register_ide(void); > > void ep93xx_init_devices(void); > extern struct sys_timer ep93xx_timer; Regards, Hartley -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html