From: Zhang Rui <rui.zhang@xxxxxxxxx>
If a device has _PR3._ON, it means the device supports D3_HOT.
If a device has _PR3._OFF, it means the device supports D3_COLD.
Add the ability to validate and enter D3_COLD state in ACPI.
Signed-off-by: Zhang Rui <rui.zhang@xxxxxxxxx>
---
drivers/acpi/power.c | 4 ++--
drivers/acpi/scan.c | 10 +++++++++-
2 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 9ac2a9f..0d681fb 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -500,14 +500,14 @@ int acpi_power_transition(struct acpi_device *device, int state)
{
int result;
- if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3))
+ if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
return -EINVAL;
if (device->power.state == state)
return 0;
if ((device->power.state < ACPI_STATE_D0)
- || (device->power.state > ACPI_STATE_D3))
+ || (device->power.state > ACPI_STATE_D3_COLD))
return -ENODEV;
/* TBD: Resources must be ordered. */
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 8ab80ba..a9d4391 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -881,8 +881,16 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
device->power.flags.power_resources = 1;
ps->flags.valid = 1;
- for (j = 0; j < ps->resources.count; j++)
+ for (j = 0; j < ps->resources.count; j++) {
acpi_bus_add_power_resource(ps->resources.handles[j]);
+ /* Check for D3_COLD support. _PR3._OFF equals D3_COLD ? */
+ if (i == ACPI_STATE_D3) {
+ if (j == 0)
+ device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1;
+ status = acpi_get_handle(ps->resources.handles[j], "_OFF", &handle);
+ device->power.states[ACPI_STATE_D3_COLD].flags.valid &= ACPI_SUCCESS(status);
+ }
+ }
}
/* Evaluate "_PSx" to see if we can do explicit sets */
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
