It's difficult to determine which domain_device is triggering error recovery, so convert messages like: sas: ex 5001b4da000e703f phy08:T attached: 5001b4da000e7028 sas: ex 5001b4da000e703f phy09:T attached: 5001b4da000e7029 ... ata7: sas eh calling libata port error handler ata8: sas eh calling libata port error handler ...into: sas: ex 5001517e85cfefff phy05:T:9 attached: 5001517e85cfefe5 (stp) sas: ex 5001517e3b0af0bf phy11:T:8 attached: 5001517e3b0af0ab (stp) ... sas: ata7: end_device-21:1: dev error handler sas: ata8: end_device-20:0:5: dev error handler which shows attached link rate, device type, and associates a domain_device with its ata_port id to correlate messages emitted from libata-eh. As Doug notes, we can also take the opportunity to clarify expander phy routing capabilities. Cc: Douglas Gilbert <dgilbert@xxxxxxxxxxxx> [dgilbert@xxxxxxxxxxxx: clarify table2table with 'U'] Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx> --- drivers/scsi/libsas/sas_ata.c | 43 ++++++++++++++++----- drivers/scsi/libsas/sas_expander.c | 74 +++++++++++++++++++++++++----------- 2 files changed, 85 insertions(+), 32 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 4f5e147..82868d6 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -317,6 +317,28 @@ static int local_ata_check_ready(struct ata_link *link) } } +static int sas_ata_printk(const char *level, const struct domain_device *ddev, + const char *fmt, ...) +{ + struct ata_port *ap = ddev->sata_dev.ap; + struct device *dev = &ddev->rphy->dev; + struct va_format vaf; + va_list args; + int r; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + r = printk("%ssas: ata%u: %s: %pV", + level, ap->print_id, dev_name(dev), &vaf); + + va_end(args); + + return r; +} + static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, unsigned long deadline) { @@ -333,7 +355,7 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, res = i->dft->lldd_I_T_nexus_reset(dev); if (res != TMF_RESP_FUNC_COMPLETE) - SAS_DPRINTK("%s: Unable to reset ata device?\n", __func__); + sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n"); phy = sas_get_local_phy(dev); if (scsi_is_sas_phy_local(phy)) @@ -344,7 +366,7 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, ret = ata_wait_after_reset(link, deadline, check_ready); if (ret && ret != -EAGAIN) - ata_link_err(link, "COMRESET failed (errno=%d)\n", ret); + sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret); /* XXX: if the class changes during the reset the upper layer * should be informed, if the device has gone away we assume @@ -665,7 +687,7 @@ static void async_sas_ata_eh(void *data, async_cookie_t cookie) * remove once all commands are completed */ kref_get(&dev->kref); - ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata port error handler"); + sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n"); ata_scsi_port_error_handler(ha->core.shost, ap); } @@ -702,26 +724,27 @@ void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) { struct scsi_cmnd *cmd, *n; - struct ata_port *ap; + struct domain_device *eh_dev; do { LIST_HEAD(sata_q); - - ap = NULL; + eh_dev = NULL; list_for_each_entry_safe(cmd, n, work_q, eh_entry) { struct domain_device *ddev = cmd_to_domain_dev(cmd); if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd)) continue; - if (ap && ap != ddev->sata_dev.ap) + if (eh_dev && eh_dev != ddev) continue; - ap = ddev->sata_dev.ap; + eh_dev = ddev; list_move(&cmd->eh_entry, &sata_q); } if (!list_empty(&sata_q)) { - ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata cmd error handler\n"); + struct ata_port *ap = eh_dev->sata_dev.ap; + + sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error handler\n"); ata_scsi_cmd_error_handler(shost, ap, &sata_q); /* * ata's error handler may leave the cmd on the list @@ -737,7 +760,7 @@ void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, while (!list_empty(&sata_q)) list_del_init(sata_q.next); } - } while (ap); + } while (eh_dev); } void sas_ata_schedule_reset(struct domain_device *dev) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 68a80a0..4b2ecd3 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -166,7 +166,22 @@ static inline void *alloc_smp_resp(int size) return kzalloc(size, GFP_KERNEL); } -/* ---------- Expander configuration ---------- */ +static char sas_route_char(struct domain_device *dev, struct ex_phy *phy) +{ + switch (phy->routing_attr) { + case TABLE_ROUTING: + if (dev->ex_dev.t2t_supp) + return 'U'; + else + return 'T'; + case DIRECT_ROUTING: + return 'D'; + case SUBTRACTIVE_ROUTING: + return 'S'; + default: + return '?'; + } +} static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *disc_resp) @@ -176,9 +191,10 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, struct smp_resp *resp = disc_resp; struct discover_resp *dr = &resp->disc; struct sas_rphy *rphy = dev->rphy; - int rediscover = (phy->phy != NULL); + bool new_phy = !phy->phy; + char *type; - if (!rediscover) { + if (new_phy) { phy->phy = sas_phy_alloc(&rphy->dev, phy_id); /* FIXME: error_handling */ @@ -223,20 +239,41 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, phy->phy->maximum_linkrate = dr->pmax_linkrate; phy->phy->negotiated_linkrate = phy->linkrate; - if (!rediscover) + if (new_phy) if (sas_phy_add(phy->phy)) { sas_phy_free(phy->phy); return; } - SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n", - SAS_ADDR(dev->sas_addr), phy->phy_id, - phy->routing_attr == TABLE_ROUTING ? 'T' : - phy->routing_attr == DIRECT_ROUTING ? 'D' : - phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?', - SAS_ADDR(phy->attached_sas_addr)); + switch (phy->attached_dev_type) { + case NO_DEVICE: + type = "no device"; + break; + case SAS_END_DEV: + if (phy->attached_iproto) { + if (phy->attached_tproto) + type = "host+target"; + else + type = "host"; + } else { + if (dr->attached_sata_dev) + type = "stp"; + else + type = "ssp"; + } + break; + case EDGE_DEV: + case FANOUT_DEV: + type = "smp"; + break; + default: + type = "unknown"; + } - return; + SAS_DPRINTK("ex %016llx phy%02d:%c:%X attached: %016llx (%s)\n", + SAS_ADDR(dev->sas_addr), phy->phy_id, + sas_route_char(dev, phy), phy->linkrate, + SAS_ADDR(phy->attached_sas_addr), type); } /* check if we have an existing attached ata device on this expander phy */ @@ -1176,32 +1213,25 @@ static void sas_print_parent_topology_bug(struct domain_device *child, struct ex_phy *parent_phy, struct ex_phy *child_phy) { - static const char ra_char[] = { - [DIRECT_ROUTING] = 'D', - [SUBTRACTIVE_ROUTING] = 'S', - [TABLE_ROUTING] = 'T', - }; static const char *ex_type[] = { [EDGE_DEV] = "edge", [FANOUT_DEV] = "fanout", }; struct domain_device *parent = child->parent; - sas_printk("%s ex %016llx (T2T supp:%d) phy 0x%x <--> %s ex %016llx " - "(T2T supp:%d) phy 0x%x has %c:%c routing link!\n", + sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx " + "phy 0x%x has %c:%c routing link!\n", ex_type[parent->dev_type], SAS_ADDR(parent->sas_addr), - parent->ex_dev.t2t_supp, parent_phy->phy_id, ex_type[child->dev_type], SAS_ADDR(child->sas_addr), - child->ex_dev.t2t_supp, child_phy->phy_id, - ra_char[parent_phy->routing_attr], - ra_char[child_phy->routing_attr]); + sas_route_char(parent, parent_phy), + sas_route_char(child, child_phy)); } static int sas_check_eeds(struct domain_device *child, -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html